Dongguan Sian Photoelectric QZYL-Ledstrips LED Strip Light User Manual

LED STRIP LIGHTS User Manual

|

http://app.appurl.me/79818918012

---|---

Product Parameters

• Model NO : QZYL-Ledstrips-
• LED Type: 5050 RGB
• Input Voltage of Adapter: AC 100V-240V
• Remote Distance: within
• Working Temperature: -20 C —+45 C
• Beam Angle: 120°
• Width of Strip Light: lcm *Length of Strip Light:
• Whether it’s cuttable:Yes

Remote Control Mode

• Turn off

• Turn on

• Adjust the brightness levels of the 12 static colors brightness levels from bright to dim (8 levels)

• Adjust the 12 static colors’ brightness levels from dim to bright(8 levels)

• 12 Static Colors

• The strengthening and weakening key of Red, Green, and Blue, works under DIY Mode. Invalid by another mode

• Press DIY1, then press it (the arrow key of Red. Green, and Blue) to adjust color preferences. then press any other keys to save DIY2- DIY empathy operation When lights are on. Press these keys to let the color change gradually according to the music rhythm.
  

• Timing function; when the light strip is turned on, press the timing function keys. the light strip will flash once, which means that the timing function is activated, and the light strip will turn off after 1H/2H/3H/4H. tinder the modes JUMPS, JUMP7, FADES, FADE7, FLASH, AUTO, can speed up the change (8 levels)

• Under the modes: JUMPS. JUMP7, FADES, FADE7, FLASH, AUTO, can slow down the change (8 levels)

• JUMP3, JUMP7, FADE3, FADE7, and FLASH mode automatically cycle

• Turn on the white light strobe mode

• JUMP3: 3 colors jump change

• JUMP7:7 colors jump change

• FADE3: 3 colors gradient change

• FADE7: 7 colors gradient change

APP Mode

This APP requires a minimum Phone system: Andriod 4.3 or iOS 8.0. No limit for mobile phone configuration. You can download APP by scanning QR codes on iOS or Android systems. Use Apps with scanning functions such as browsers to scan the QR code. Open the grip lights control APP. you can connect multiple LED strips.

http://app.appurl.me/79818918012

APP Notes :
Please note one time only connect one app. or they will not be connected normally

How to Connect Them Correctly?

WARNING

• DO NOT IMMERSE IN FIRE
• CHILDREN UNDER THE THE AGE OF 16 SHOULD USE THIS PRODUCT UNDER ADULT SUPERVISION.

How to use the Bluetooth APP?

Bluetooth APP uses directions

|
---|---

1. Download and Open the *RociLifes app.
2. Make sure your phone’s Bluetooth is open, and register a RociLife account
3. Click “-Fe to search the device, and select the Roci-BLEDOM to connect
4. You can choose the RGB color/Brightness to control the led light color And brightness.

Common Troubleshooting

” The controller has connected the power. but not light up

1. Check the input power supply: please use the power adapter that we equipped or other adapters with the same specification as ours. The input voltage must meet the voltage requirement of the strip lights.
   When the input voltage is lower than a requirement, the strip lights will not be turned on, while higher voltage may damage the circuit.
   The output power of the adapter (KW value) must be equal to, or higher than the power of the LED strip lights.

2. Check whether the connector is connected correctly with the strip lights. Make sure each interface is connected correctly

3. Check whether the remote control is open.

Attentions

1. The arrows must be aligned, otherwise will not work.
2. The remote control must be aligned to the Infrared Receiver of the controller.
3. The led strip lights must be connected correctly based on the installation guide.
4. The light strips are not waterproof and are suitable for indoor uses.

*Make sure the surface you are going to paste strip is clean and dry.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receivingantenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>