tuya R9 Smart Video Doorbell User Guide
- June 5, 2024
- Tuya
Table of Contents
tuya R9 Smart Video Doorbell
Packing list
After opening the package, please make sure that the doorbell {hereinafter
referred to as “Equipment”) is in good condition. Be sure to include the
following parts.
Appearance Introduction
- IRLED Insufficient ambient Ilg ht, black and white Images ere dis played.
- Light Sensor Used to collect ambient light status. When the ambient light drops to 2 Lux, the infrared light will automatically turn on.
- MIC Audio capture
- Button Doorbell button
- PIR When the front of the de\llce detects the movement of an object, the device will automatically send a notification to the phone.
- Camara Video Image capture
- Indicator Light Blue light flashing: configuration status Steady red light: Charging the battery Blue light always on: successfully connected to WiFi
- Home Button To reset the device, long press this button for 5 seconds To light the display, short press this button for 1 second.
- Charging Port Micro use port charging
- TFCard TF Card Slot
- Switch Switch ON/OFF
Set the Device
Thank you for choosing our products! Please follow the instructions below to
set up and use the doorbell device.
1. Download and install the APP
Open App Store (for iOS) or Google Play Store (for Android outside China ) or
Yingyongbao Store (For Android inside China) on your follow the be lowing,
Search for “TuyaSmart” or scan QR code as following to download the right App
for your phone.
Set up the APP
Before you begin:
- Make sure to install Tuya Smart APP on your device.
- Make sure your device is connected to the 2.4GHZ WI-Fl network and not compatible with the 5GHZ network.
User registration New users register it according to guide steps, already registered user just login it.
Add device
Before adding, make sure the device is configured -with voice announcement. If
you don’t hear the voice notification, press and hold the Home button for 5
seconds to reset the device. You can release the button after the LED light
goes out, power off and restart, the device will automatically restart to
default settings.
Open the “Tuya Smart” App and tap “Add Device” Select device type: Video
Surveilance – Smart Doorbell , then make connection with the device according
to the steps
Select “Next, the WIFI network name will be automatically filled in, enter the
Wifi password and click” to confirm.
Note: If you are connected to the same Wifi, the app will automatically
fill in the corresponding password, and you do not need to fill in the
password again.
When you hear the prompt connecting the network
click Continue”and use camera to scan the OR Code displayed on you phone make
sure to keep 15-20cm distance between the mobile device to the doorbell When
you hear the prompt”Connecting the network”tap”I heard a Prompr and wait until
the device connected successfully. If your camera fails to connect, please try
to RESET the camera and repeat all steps again.
When the app show Device added successfully,Congratulations! The device is
ready for use now! 
Wifi Doorbell Functions
Support following functions Two-wayAudio; Video recording to local file; Take
Photo; Playback video when the Micro SD Card plugged. 4.1 Live view In the
device list section.it shows all devices with successfully connections.click
the corresponding device to view live videos directly
Micro SD Card Video Playback
Micro SD Card Recording Type: APP wake up the device and take video; Press
button to wake up the device and take video: Motion detection and take video;
Remark:Currently the device only supports Micro SD cards with the FAT32 system
format others cannot be identified.
Device Management
Click the corresponding device to view live videos directly in the device list
section You could choose” … ” at the top right corner to enter device setting
.
- Modify Device Name Click”Device Name” on setting page to rename device
- Device Sharing Click”Share Device” on setting page to share the device to other family members
- Device Information Click”Device information” on setting page to check device information.
- Power Management SettingClick”Power Management Setting” to check power working status or set the low battery alarm threshold. Options:10%-50%
- Basic Function Setting Click”Basic Function Setting”to set below functions: Flip Screen:on/offfimeWatermark:on/off;Talk Mode:One-WayTalk/Two-Way Talk
- PIR sensitivity Setting Click”PIR” to set the sensitivity PIR:Low/Medium/High/Off
- Off:Close PIR function.
- Low:Wake up and record footage if any motion in front of the camera last for more than 7 seconds been detected.A notification will be sent to mobile devices at the same time.
- Medium:Wake up and record footage if anymotion in front of the camera last for more than5 seconds been detected.A notification will be sent to mobile devices at the same time.
- High:Wake up and record footage if any motion in front of the camera last for more than 1 seconds been detected.A notification will be sent to mobile devices at the same time.
Note: In a crowded environment. It is recommended to turn off the device or set it to low sensitivity to reduce unnecessary wake up and notification pushes to extend battery life.
-
Memory card settings
Click “Memory Card Settings” to check the Micro SD card status, including total capacity, used and remaining capacity or format the memory card.
Note for using -
When a fully charged rechargeable lithium battery is used to power the device, The battery normally can supports 1-3 months usage. When the battery voltage is low, the mobile device APP will send a notification. If you receive a notification, please charge the device in time.
Place the camera within the range of the router.
Make sure to choose a place covered by Wifi signal. Even near the router, thick or insulated doors can greatly reduce the strength of the WiFi signal. It is recommended to test before installing the camera. -
The device is designed based on low-power components and can be remotely awakened from APP through PIR human motion detection or doorbell pressing. After each wake-up, the device will work for 25 seconds and then return to standby.
Technical specifications
15000 mAh battery normally can supports 1-3 months usage.
FCC Requirement
Any changes or modifications not expressly approved by the party responsible
for compliance could
void the use「’ s authority to ope「ate the equipment
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two
conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency ene「gy, and if not installed and used in accordance with the instructions, may cause harmful interference to 「adio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be dete「mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or mo「e of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receive「 is connected
- Consult the dealer or an experienced radio/TV technician for help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>