LP NO 1 LPSC-008 Bluetooth Vinyl Record Player with External Speakers User Manual

LP NO 1 LPSC-008 Bluetooth Vinyl Record Player with External Speakers

IMPORTANT:
Please read this manual carefully and completely before operating this unit and keep this manual for future reference.

OVERVIEW

1. Lift Lever
2. Tone-arm
3. Speed Control Selection Switch
4.  AUTO STOP ON/OFF Switch
5. Tone Arm Clip/Rest
6. stytus(Needle) Cartridge
7. Power Switch(VOLUME CONTROL KNOB)
8. Indicator
9. Function Knob
10. Turntable Platter
11. 45RPM adaptor
12. DC IN Power Jack
13. L/R RCA Output Jack

Getting Started

Connect the main unit and the speakers with the RCA cable. Firmly and securely insert the DC plug of the adaptor to the DC IN Jack on the back of the untt. Plug the adaptor’s AC plugs into a power outlet.

Phono Mode

1. Switch the function knob to PH mode. Turn on the power switch knob. The indicator will become red color.

2. Place a record on the turntable platter and select the desired speed (33/45/78) according to the record. NOTE: when playing a 45RPM record, use the included 45RPM adaptor.

3. Remove the stylus protector. Open the tone-arm clip to release the tone-arm. Push the lift lever backward to raise the tone-arm and gently move the tone-arm to the desired position over the record. The turntable will begin to spin when the arm is moved toward the record. Push the lift lever forward to lower the tone-arm slowly onto the desired position on the record to begin playing the record. Please note: The record will begin to spin only when the tone-arm is moved toward the record if the Auto stop is turned on.

4. If the Auto Stop Control Switch is turned ON, the record will stop automatically when finished.
   Remark : AUTO STOP function applies to most 33RPM vinyl records. However, for very few vinyl records, It w/11 stop when It does not come to the end, or It w/11 not stop when It comes to the end when AUTO STOP is ON.

5. Turn the VOLUME CONTROL KNOB to adjust the volume.

Bluetooth Mode

1. Switch the function knob to BT. The indicator will become blue color with flashing.
2. Turn on your Bluetooth function on your mobile phone or tablet PC and then search the turntable player with its name LPSC-008. After pairing and connection, the Bluetooth indicator will become blue color without flashing, and you can play your music of your mobile phone or tablet PC on this turntable player.
3. Turn the VOLUME CONTROL KNOB to adjust the volume.

Remark:
the mobile phone or tablet PC’s volume level also impact the overall volume; please adjust that as well to have a satisfying sound.

How to Replace the Turntable stylus (Needle)

Removing the stylus from the Cartridge

1. Place a screwdriver at the tip of the stylus and push downward as shown in direction “A”.
2. Remove the sty1us by pu lling the stylus forward and pushing downward.

Installing the Slylus

1. Hold the tip or the stylus and insert the stylus by pressi ng as shown in direction “B”.
2. Push the stylus upward as in direction until the stylus locks into the tip position.

TIPS FOR BETTER TURNTABLE PERFORMANCE

1. When opening or dosing the turntable cover, handle it gently.
2. Do not touch the needle tip with your fingers; avoid bumping the needle against the turntable platter or record edge.
3. Frequently clean the needle tip-use a soft brush in a “back-to-front motion only.
4. If you must use a needle deaning fluid, use very sparingly.
5. Gently wipe the turntable player housing with a soft cloth.Use only a small amount of mild detergent to dean the turntable player.
6. Never apply harsh chemicals or solvents to a part of the turntable system.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>