ANKER H700 PowerConf Headphone User Guide

: June 5, 2024
: Anker

ANKER H700 PowerConf Headphone

ANKER-H700-PowerConf-Headphone-product

Important Safety Information

Avoid dropping.
Do not disassemble.
Do not submerge in water.
The product should not be exposed to dripping or splashing.
Avoid extreme temperatures.
The product should not be exposed to excessive heat such as sunshine, fire or the like.
Use original or certified cables.
Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
Do not use the product outdoors during thunderstorms.

Hearing Safety

To avoid hearing damage, do not listen for extended periods at high volume.
Do not turn the volume so high that you’re unable to hear your surroundings.
Do not use earphones while driving.
You should use caution or temporarily discontinue use in potentially hazardous situations.

Notice
This product complies with the radio interference requirements of the European Community.

CAUTION
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A3510, A3523 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ankerwork.com
Maximum output power: 9.0 dBm Frequency band: 2.4G band (2.402GHz-2.480GHz) The following importer is the responsible party (contract for EU and UK matters) Anker Technology (UK) Ltd Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany

SUPPORT

For FAQs, detailed user manuals, and other information, please visit www.ankerwork.com

APP/SOFTWARE

WEARING

ANKER-H700-PowerConf-Headphone-4

The headset can be worn with the mic boom on either side. When switching from one side to the other, the mic boom must be lowered all the way down and directed towards your mouth so that the volume adjustment direction and sound channels can be adjusted accordingly.

ASSEMBLING

Slide the upper piece into position to securely assemble the charging stand.

CHARGING

ANKER-H700-PowerConf-Headphone-6

Fully dry off the USB-C charging port before charging.

CHARGING WITH STAND

Align the charging pins on both the headset and the charging stand for successful charging. Only available for the version with the charging stand.

POWERING ON/OFF

Press and hold the power button for 2 seconds to power on, or 5 seconds to power off.

PAIRING

ANKER-H700-PowerConf-Headphone-9

Plug the USB Bluetooth receiver (with the USB adapter, if necessary) into your PC’s USB port. PowerConf H700 will automatically connect to your PC when powered on. Alternatively, press and hold the power button for 5 seconds to enter Bluetooth pairing mode when powered off.

DUAL PAIRING

To pair with another device when already connected with one device, press the power button twice until the LED indicator flashes blue.

CONTROLS

x1: Press once
x2: Press twice
x3: Press three times
2s: Press and hold for 2 seconds
Busy light
Voice Assistant
Answer/End a call
Reject a call

LED LIGHT GUIDE

ANKER-H700-PowerConf-Headphone-12

WEARING DETECTION

When you take off PowerConf H700, the playback will auto-pause within 2 seconds, and ANC and transparency will turn off within 10 seconds. You can put on the headset to answer an incoming call. You can also enable the autoplay on wearing function in the AnkerWork app.

MUTE

There are three ways to mute your headset: by pressing the mute button, by moving the earpiece with the mic boom outward for 2 seconds, or by lifting the mic boom.

RESET

Press the power button and the rotation button simultaneously for 5 seconds until the LED indicator on the mic boom flashes red for 5 seconds.

Customer Service

service@anker.com support.mea@anker.com (For Middle East and Africa Only) support@anker.com

Input: 5V 0.75A Charging time: 2 hours Talk time: Up to 24 hours (ANC off) Playtime (varies by volume level and contents): Up to 35 hours (Bluetooth and ANC off)

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong ANKER TECHNOLOGY (UK) LTD Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Deutschland GmbH Georg- Muche-Strasse 3, 80807 Munich, Germany

UK Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A3510, A3523 is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://www.ankerwork.com/products This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction The following importer is the responsible party Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 (800) 988 7973

IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement
SAR limits is used against the head. The SAR limit is 1.6 watts per kilogram averaged over 1 gram of tissue for use against the head. During testing, the device radios are set to their highest transmission levels and placed in positions that simulate use against the head, with 0 mm separation.