dyson DPO1NISC Pure Cool Link Purifying Desk Fan User Guide

June 5, 2024
dyson

dyson DPO1NISC Pure Cool Link Purifying Desk Fan

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-
product

Register today
Register your machine to be the first to receive Dyson updates and news.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS MACHINE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE MACHINE
When using an electrical machine, basic precautions should always be followed, including the following:

WARNING
THE FAN AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS.

  1. Pacemakers and defibrillators may be affected by strong magnetic fields. If you or someone in your household has a pacemaker or defibrillator, avoid placing the remote control in a pocket or near to the device.
  2. Credit cards and electronic storage media may also be affected by magnets and should be kept away from the remote control and the top of the machine.

WARNING
These warnings apply to the machine, and also where applicable, to all tools, accessories, chargers or mains adaptors.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY :

  1. This Dyson machine is not intended for use by persons (including children) with reduced physical, sensory or reasoning capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety.
  2. Ensure machine is fully assembled in line with the instructions before use. Do not dismantle the machine or use without the loop amplifier fitted.
  3.  Do not allow to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the machine.
  4. Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than that shown in this manual, or advised by the Dyson Helpline.
  5. Suitable for dry location ONLY. Do not use outdoors or on wet surfaces and do not expose to water or rain.
  6. Do not handle any part of the plug or machine with wet hands.
  7. do not operate any machine with a damaged cord or plug. Discard the machine or return to an authorized service facility for examination and/or repair. If the supply cord is damaged it must be replaced by Dyson, its service agent or similarly qualified person in order to avoid a hazard.
  8. If the machine is not working as it should, has received a sharp blow, has been dropped, damaged, left outdoors, or dropped into water, do not use and contact the Dyson Helpline.
  9. Do not stretch the cord or place the cord under strain. Keep cord away from heated surfaces.
  10. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
  11. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. The use of an extension cord is not recommended.
  12. Do not put any object into openings or the inlet grill. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
  13. Do not use any cleaning agents or lubricants on this machine. Unplug before cleaning or carrying out any maintenance.
  14. Always carry the machine by the base, do not carry it by the loop amplifier.
  15. Turn off all controls before unplugging. Unplug from outlet when not in use for extended periods. To avoid a tripping hazard, safely coil the cord.
  16. Do not use near furnaces, fireplaces, stoves or other high temperature heat sources.
  17. Do not use in conjunction with or directly next to an air freshener or similar products. Do not spray or apply perfumes directly on or near the filter. Keep essential oils and chemicals away from the machine.
  18. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
  19. WARNING : Chemical Burn and Choking Hazard. Keep batteries away from children. This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as 2 hours. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  20. When removing or replacing the filter, take care to keep your fingers clear between the filter and the purifier base.

READ AND SAVE THESE INSTRUCTIONS
THIS DYSON MACHINE IS INTENDED FOR HOUSEHOLD USE ONLY

POLARIZATION INSTRUCTIONS
To reduce the risk of electric shock, this machine has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not attempt to defeat this safety feature and do not change the plug in any way.

Remote control

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-1

Attach the remote control to the top of the machine with the buttons facing down.

To operate, point the remote control toward the front of the base.

Display icons

  • Flashing green = Wi-Fi is ready to connect to your Dyson Link app
  • Flashing white =
  • Wi-Fi connecting
  • Solid white = Wi-Fi connected
  • Off = Wi-Fi disabled
  • Solid white = cleaning/ air quality target has not been met
  • Solid green = clean/air quality target has been met
  • Off = machine is not in auto cleaning mode
  • Solid white = machine is in night mode
  • Off = machine is not in night mode

Sleep timer

To set the sleep timer, select the desired time. When time reaches zero, the machine will go into standby mode. To cancel, decrease the time until two dashes appear.

Airflow

  • Select a high flow of air.
  • Select a low flow of air.

Tilt function

Carefully hold the base and the main body. Tilt the amplifier forward or backward for the required airflow angle.

Night mode

The night mode will dim the display and run quietly, making it ideal for use while sleeping.When night mode is enabled (indicated by an illuminated half moon symbol in the top right corner of the display), the display will dim and after 5 seconds will fade to off. The half moon symbol remains illuminated.

If the machine is not in auto mode, the airflow speed will reduce to level 4. When night mode is activated, if it is already below level 4, it will remain the same. This can be manually changed if desired. The display will illuminate briefly, then fade as before. If in auto mode the airflow speed will be reduced automatically.

Auto mode

Selecting auto mode adjusts the airflow according to the air quality in the room.

When auto mode is enabled (indicated by an A symbol in the bottom left corner of the display), the on-board sensors will intelligently adjust the speed of the machine according to the air quality. speed. For additional control the Dyson Link app can be used to further adjust the sensitivity of the machine. A period of 6 days is required after the machine is first used for the sensor to calibrate. During this period the machine may be more sensitive to VOCs (such as odors) than normal.

Setting up Dyson Link app

The machine can be enhanced when connected to the Dyson Link app on your smart device.

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-12

  • Download the Dyson Link app, available on iOS and Android.
  • Select ‘Add a Product’ from within the app and follow the on screen instructions.
  • In order to connect the machine, you will need the information on the front of this manual.

Clearing blockages

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-13

Ensure the machine is unplugged. Look for blockages in the air inlet holes on the filter. Use a soft brush to remove debris. Look for blockages in the small aperture inside the loop amplifier. Use a soft brush to remove debris.

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-14

Press buttons to lift off loop amplifier and lift off filter. Look for blockages in the air inlet holes under the filter and use a soft brush to remove debris. Replace the filter and then the loop amplifier.

Cleaning

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-15

Ensure the machine is unplugged. Dust may accumulate on the surface of the machine. Wipe dust from the loop amplifier, filter unit and other parts with a dry or damp cloth when dust accumulates. Do not use detergents or polishes to clean the machine. Clean the hatch every time the filter is replaced. Open the small hatch on the side of the machine. Use a cotton swab to clean inside and remove any debris. This maintains sensor accuracy and ensures the continuing high performance of the machine.

Replacing the filter unit

When your non-washable filter unit needs replacing the machine will display the pattern shown. To replace the non-washable filter unit, follow these steps. Ensure your machine is unplugged. Your Dyson machine is programmed to remind you to replace the filter unit after 12 months based on 12 hours usage a day. Please note your indicator will activate sooner with more use. The indicator is only a guide. Use in heavily polluted environments may require the filter unit to be replaced more regularly. Outside air quality can be checked through the Dyson Link app.

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-17

When disposing of the exhausted filter unit please do so in accordance with local regulations.

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-18

When you have re-assembled your machine , press and hold the ‘Standby ON/OFF’ button for 6 seconds on the remote control to reset the filter indicator.

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-19

Clearing your Wi-Fi settings

It is possible to remove your network details from the machine.

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-20

Press and hold the Standby ON/OFF button on the machine for longer than 21 seconds. The Wi-Fi symbol will flash alternately between white and green to indicate that your network details have been removed. If you clear your network settings the machine will not connect to the Dyson Link app.

Enabling or Disabling Wi-Fi

Wi-Fi can be enabled or disabled by pressing and holding the ON/OFF button on the machine for between 10 and 20 seconds.

If Wi-Fi is disabled, the machine will not connect to the Dyson Link app.

Troubleshooting

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-22

If you see a flashing ‘E’ when trying to use the machine, it is unable to do what has been requested.If you see a solid ‘E’ when trying to use the machine, it shows the machine has stopped functioning correctly.Make sure that you have checked the following:

  • The room temperature is above 5°C/41°F
  • There are no blockages in the inlet grille or loop amplifier outlet.
  • The filter has been correctly assembled and doesn’t need to be replaced.
  • The machine is correctly plugged in directly to the wall outlet.
  • If the message still displays, unplug and leave for 10 seconds before turning on again. If the problem persists, please call the Dyson Helpline at 1-866-693-9766.

USER SERVICING INSTRUCTIONS

dyson-DPO1NISC-Pure-Cool-Link-Purifying-Desk-Fan-23

  • Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. Slide open the fuse access cover on top of the plug towards blades.
  • Remove fuse carefully.
  • Replace fuse only with 5 Amp, 125 Volt fuse.
  • Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug.

USING YOUR DYSON MACHINE

PLEASE READ THE ‘IMPORTANT SAFETY INSTRUCTIONS’ IN YOUR DYSON USER MANUAL BEFORE PROCEEDING.

LOOKING AFTER YOUR DYSON MACHINE

  • Do not carry out any maintenance or repair work other than that shown and described in your Dyson User manual, or advised by the Dyson Helpline.
  • Always disconnect the plug from the mains outlet before inspecting for problems. If the machine will not operate, first check that the mains outlet has an electricity supply and that the plug is properly inserted into the outlet.
  • If the fuse needs replacing, please check ‘User servicing instructions’.

CONTROL WITHOUT REMOTE
Your machine can be controlled through the Dyson Link app. REPLACEABLE PARTS

BATTERY REPLACEMENT

CAUTION

  • Unscrew the battery compartment on the remote control. Loosen the base and pull to remove the battery.
  • Do not install backwards or short circuit the batteries.
  • Do not attempt to dismantle or charge the batteries. Keep away from fire.
  • Follow battery manufacturers’ instructions when installing new batteries (battery type CR 2032).

NON-WASHABLE FILTER UNIT
• Your filter unit is non-washable and non-recyclable.
• To replace your filter unit follow the steps as shown.
• Failure to replace the filter when prompted may result in changes to product performance and appearance.
• A new filter unit can be purchased at www.dyson.com/filter.

AUTO MODE
A period of six days is required after your machine is first used for the sensor to calibrate. During this period, your machine may be more sensitive to VOCs (such as odors) than normal.

DISPOSAL INFORMATION

  • Dispose of or recycle the battery in accordance with local ordinances or regulations.
  • Keep the used batteries away from children as these can still harm children if swallowed.
  • Dyson products are made from high grade recyclable materials. Recycle where possible.
  • Your filter unit is non-washable and non-recyclable.
  • The battery should be removed from the machine before disposal.
  • Dispose of the exhausted filter in accordance with local ordinances or regulations.
  • California: This product includes a separate remote control device with a coin cell battery. The coin cell battery contains Perchlorates. Specia

DYSON CUSTOMER CARE

THANK YOU FOR CHOOSING TO BUY A DYSON MACHINE.
We don’t stop caring about our machines once they’re yours. With your free 2-year warranty, your Dyson purifying fan will be covered for parts and labor (excluding filters) for two years from the date of purchase, subject to the terms of the warranty. Even after your warranty has ended, we’ll still be on hand to help.If you have any questions regarding your Dyson machine, visit www.dyson.com/support for online help, general tips and useful information about Dyson. Alternatively, you can call the Dyson Helpline with your serial number and details of where and when you bought the machine. If your Dyson machine needs a repair, call the Dyson Helpline so we can discuss the available options. If your Dyson machine is under warranty, and it is a covered repair, it will be repaired at no cost. Your serial number can be found on your rating plate which is on the base of your machine.

REGISTER YOUR MACHINE TO BE THE FIRST TO RECEIVE DYSON UPDATES AND NEWS
To help us ensure you receive a prompt and efficient service, please register as a Dyson machine owner. There are four ways to do this:

  • Online at www.dyson.com/register
  • Telephone the Dyson Helpline on 1-866-693-9766.
  • Complete the enclosed Warranty Form and mail it to us.
  • Smartphone. Download the Dyson Link app and you will be taken through registration as part of the set up. This will confirm ownership of your Dyson machine in the event of an insurance loss, and enable us to contact you if necessary.

LIMITED 2-YEAR WARRANTY

TERMS AND CONDITIONS OF THE DYSON 2-YEAR LIMITED WARRANTY
WHAT IS COVERED
This limited warranty is subject to the following terms:

  • Your Dyson machine is warranted against original defects in materials and workmanship for a period of 2 years from the date of purchase, when used for normal domestic purposes in accordance with the Dyson Operating Manual. Please retain your proof of purchase. If you do not have your proof of purchase, your warranty will start 90 days after the date of manufacture, according to Dyson’s records. This warranty provides, at no extra cost to you, all labor and parts necessary to ensure that your machine is in proper operating condition during the warranty period. The replacement of any part of your machine under warranty will not extend the period of warranty; however, your warranty will be extended for any time your machine is being repaired or retained for work being performed under the warranty. Any parts which are returned and replaced by Dyson will become the property of Dyson. Please call the Dyson Helpline on
    1- 866-693-9766 for more information.

  • For refurbished machines, length of warranty may differ, please see warranty letter included with machine for warranty terms.

  • This warranty is only valid if the machine is used in the country in which it was sold.

WHAT IS NOT COVERED

  • Replacement filters. The machine’s filter is not covered by the warranty. Dyson shall not be liable for costs, damages or repairs incurred as a result of, due to, or from:
  • Damage caused by not carrying out the recommended machine maintenance.
  • Purchases of machines from unauthorized dealers.
  • Careless operation or handling, misuse, abuse and/or lack of maintenance or use not in accordance with the Dyson User manual.
  • Use of the machine other than for normal domestic purposes within the United States, e.g. for commercial or rental purposes.
  • Use of parts not in accordance with the Dyson User manual.
  • Use of parts and accessories other than those produced or recommended by Dyson
  • External sources such as weather, electrical outages or power surges.
  • Repairs or alterations carried out by unauthorized parties or agents.
  • Blockages – please refer to the illustrations and the section ’Clearing blockages‘ in this Dyson User manual for details on how to look for and clear blockages.
  • Normal wear and tear (e.g. fuse etc.).
  • Damage as a result of use not in accordance with the rating plate.
  • Additionally, this limited warranty does not apply to any machine that has had the serial number altered or removed.
  • If there is any doubt as to what is covered by the warranty, please contact Dyson. WARRANTY LIMITATIONS AND EXCLUSIONS
  • To the fullest extent permitted by applicable law, any implied warranties relating to your machine including but not limited to warranty of merchantability or warranty of fitness for a particular purpose, are limited to the duration of this warranty.
  • To the fullest extent permitted by applicable law, your remedy for breach of this warranty is limited to the warranty service described below. Dyson will not be liable for any consequential damages or incidental damages you may incur in connection with your purchase and use of your machine.
  • This limited warranty gives you specific legal rights. You may also have other rights which vary by State.
  • This limited warranty is not transferable.
  • The limitations or exclusions of liability stated herein apply in the state of New Jersey, to the fullest extent permitted by applicable law.

WARRANTY SERVICE

  • Before a service can take place, the terms of the warranty require that you contact the Dyson Helpline with your model name/number, serial number, date and place of purchase.
  • Please keep your purchase receipt in a safe place to ensure that you have this information.
  • All work will be coordinated by Dyson or its authorized agents.
  • Any replaced defective parts will become the property of Dyson.
  • Service under this warranty will not extend the period of this warranty; however, your warranty will be extended for any time your machine is being repaired or retained for work being performed under the warranty.
  • If your machine is not functioning properly, please call the Dyson Helpline on 1- 866-693-9766. Most issues can be rectified over the telephone by our trained Helpline staff.

IMPORTANT DATA PROTECTION INFORMATION
You will need to provide us with basic contact information when you register your Dyson machine or via the Dyson Link app. When registering your Dyson machine:

  • You will need to provide us with basic contact information to register your machine and enable us to support your warranty. Failure to register will not diminish your warranty rights. When registering via the Dyson Link app:
  • You will need to provide us with basic contact information to register the Dyson Link app. This enables us to securely link your machine to your instance of the app.
  • When you register, you will have the opportunity to choose whether you would like to receive communications from us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest innovations.
  • We never sell your information to third parties and only use information that you share with us as defined by our privacy policies which are available on our website at privacy.dyson.com.

CONFORMITY INFORMATION

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be
less than 7.9 in (20 cm) during normal operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals