SALUS ECM600 Electric Monitor 6V – Smart Home Range User Guide
- June 5, 2024
- SALUS
Table of Contents
ECM600 Electric Monitor 6V – Smart Home Range
User Guide
INTRODUCTION
Electric Monitors measure and record electricity consumption to help
supplement a user’s understanding of their energy usage on a circuit by
circuit basis. This information can e helpful for those wanting to reduce
energy usage or adopt energy-saving behaviors by providing deeper insights
into areas of their home where more energy is being used
than others. This product must be used with the Universal Gateway (UG600/
UGE600) and the Salus Smart Home App Go to www.salus-
smarthome.com for the PDF version of the
manual.
Product Compliance
SALUS declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: www.saluslegal.com.
Safety Information
Use in compliance with safety regulations. The unit is to be used for
measuring the current flow only. This accessory must be fitted by a competent
person, and installation must comply with the guidance, standards, and
regulations applicable to the city, country, or state where the product is
installed. Failure to comply with the relevant standards could lead to
prosecution.
Always isolate the AC Mains supply before installing or working on any
components that require a 230 VAC 50Hz supply. Please use 4 AA Alkaline, non-
rechargeable batteries.
One phase fuse box Max 70Amp/clamp
Three-phase fuse box. Max 70Amp/clamp
Please use 4 AA Alkaline, non-rechargeable batteries
After initialization, the LED will start flashing red.
Success! Your Electric Monitor is now connected! You can control it directly from your Dashboard.
Tap on Connect equipment and follow the on-screen instructions. When you’re done, tap on Finished.
Factory Reset: Use only if you want to reset your device. Press the button for 10 sec. When the process is complete the LED will turn off.
DISTRIBUTOR de SALUS CONTROLS:
Sysclima. Sistemas y Soluciones Climaticas.
Poligono La Serna Calle C,
Nave 6.14 31500
– TUDELA
– Navarra ESPANA
IM PORTER: QL CONTROLS
Sp. z o.o. Sp. k. ul. Rona 4, 43-262 Kobielice
PRODUCER:
Salus Limited 6/F, Building 20E, Phase 3, Hong Kong Science Park, 20 Science
Park East Avenue, Shatin, New Territories, Hong Kong
www.Salus-controls.eu
www.sysclima.com
References
- SALUS Controls - intelligent temperature control
- Salus – Smart Technology for your comfort
- Suelo radiante y Soluciones climáticas - Sysclima