hama 00176566 WiFi Camera Instruction Manual
- June 5, 2024
- Hama
Table of Contents
hama 00176566 WiFi Camera
It’s so simple
- Download the Hama Smart Solution app from the Apple App StoreoronGoogle Play. Start the Hama Smart Solution app
- Ifyou’re using it for the first time, you’ll have to register and create a new account. If you already have an account, log in using your login details
- Connect the WiFi camera to the included USB cable and the power supply unit. Plug the power supply unit into a socket.
- Wait a moment until the camera emits a signal tone and the LED begins to flash red.
- Click +inthe upper-right corner in the app, and in the list select ‘Cameras’ followed by 176566.
- Confirm that the cameras flashing.
- Now follow the remaining instructions on your smartphone screen and then scan the QR code. When you hear an acoustic signal, confirm this.
- Now enter the name of your WiFi network and the password, and confirm.
- The camerawill now be connected. Once the connection has been established, the LED stops flashing and emits a constant blue light.
- Now you can set up, control, and configure your WiFi camera using the app.
Note: Pairing restart
Press and hold the Reset button on the back for about 5seconds until asignal tone sounds. As soon as the LED begins to flash red, you can make another pairing attempt.
Note
Detailed operating instructions are available at www.hama.com
Warranty Disclaimer
Hama GmbH &CoKG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Recycling Information
Note on environmental protection:
After the implementation of the European Directive 2012/19/EU and 2006/66/EU in the national legal system, the following applies: Electric and electronic devices, as well as batteries, must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country.This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices/Batteries, you are making an important contribution to protecting our environment.
Declaration of Conformity
Hereby,Hama GmbH &CoKG declares that the radio equipment type [00176566] is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: www.hama.com -> 00176566 -> Downloads.
Technical Data
Power supply
| 5V 1A
via USB
---|---
Frequency band| 2,4 GHz
Maximum radio-frequency power transmitted| ****
92.16 mW
Specifications in accordance with Regulation (EU) 2019/1782
Specifications in accordance with Regulation (EU) 2019/1782
Manufacturer’s name or trade mark, commercial registration number and address|
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
Model identifier| TPA-67F050100VU01
Input voltage| 100-240 V
---|---
Input AC frequency| 50/60 Hz
Output voltage / Output current / Output power| ****
5.0 V DC/ 1.0 A/
5.0 W
Average active efficiency| ****
75.5 %
Efficiency at low load (10 %)| ****
66.4 %
No-load power consumption| ****
0.07 W
Safety notes
- Protect the product from dirt, moisture, and overheating, and only use it in adry environment.
- This product is intended for private, non-commercial use only.
- Use the product for its intended purpose only.
- Donot use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Donot use the product in areas where the use of electronic devices is not permitted.
- Donot drop the product and do not expose it to any major shocks.
- Donot modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
- Donot operate the product outside the power limits given in the specifications.
- Use the item only in moderate climatic conditions.
- Donot use the product in moist environments and avoid splashes.
- Donot mount the product above locations where persons might linger.
- Before mounting, check that the wall you have chosen is suitable for the weight to be mounted. Also make sure that there are no electric, water, gas or other lines running through the wall at the mounting site.
- Pay attention to the applicable data protection regulations before installing and using the product.
- Respect the personal and property rights of others. Do not make recordings of other people with the Dashcam.
- Observe the right to one’sown image and spoken word when recording.
- The product is intended for indoor use only.
- Keep this product, like all electrical products, out of the reach of children!
Risk of electric shock
- Do not open the device or continue to operate it if it becomes damaged.
- Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
- Do not attempt to service or repair the product yourself.Leave any and all service work to qualified experts.
Warning
- Only operate the product from asocket that has been approved for the device. The socket must be installed close to the product and must be easily accessible.
- Disconnect the product from the power supply using the On/Off switch –ifthis is not available, unplug the power cordfrom the socket.
- If using a multi-socket power strip, make surethat the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
- If you will not be using the product for a prolonged period, disconnect it from mains power.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>