VICON Vue Video Cameras User Guide

VICON Vue Video Cameras

HARDWARE / Mount. Cables. Connect.

For easy system setup, use the Vicon Control app See vicon.com/products/software/vicon-control.

SOFTWARE / Download. Install. License.

1. www.vicon.com/downloads (supported from: Vicon Nexus 2.4 and Vicon Shogun 1.0)
2. Run SETUP.EXE.
3. Click Start, then Vicon Product Licensing.
4. Request a license, save it to a suitable location and activate.

For details on installing and licensing, see your Vicon software documentation.

SYSTEM / Administrator. IP address. Adapter settings.

Important: Ensure you are logged on as Administrator.

1. Open the Network Connections window.
2. Right-click on the network port that connects to the PoE switch and click Properties.
3. In the Properties dialog box, click Configure and then the Advanced tab.
4. In the Settings list, ensure the values shown (in the images on the right and the first two columns on page 3) are selected, then click OK to close the dialog box.
5. Repeat step 2 to re-open the Properties dialog box.
6. Ensure only Internet Protocol Version 4 is checked (see page 3, last column) and click the Properties button.
7. Specify the IP address 192.168.10.2 for the video network port and specify subnet mask 255.255.255.0 (see page 3, last column) and click OK. For detailed guidance on system setup, visit Vicon system setup information or download the Vicon PDF, PC Setup for Vicon systems from the same page.

RUN / Start software. Unblock firewall. Connect.

1. After you start your Vicon software, ensure that it is not blocked by a firewall and that it shows the system is live.
2. In the System Resources panel (or in Shogun, the System panel) select a camera.
3. In the View pane, change to Camera view. You can now set the camera focus and aperture.

ADJUST / Zoom. Grayscale. Focus.

The image on the right shows a view through a Vicon Vue camera set to Wide. The bottom image shows a view through a Vicon Vue camera set to Telephoto.

Warning: Under normal operation in elevated ambient conditions, the camera’s heat sink temperature can exceed 56ºC. During and after camera operation, do not touch the heat sink for longer than 1 second.

Vicon Vue regulatory and safety information

These topics provide information on how Vicon Vero complies with regulatory standards, including product recycling. The certification that Vero has achieved for meeting stated international standards.

• Radio and television interference (US and Canadian customers)
• Environmental regulations (EU customers)

Radio and television interference (US and Canadian customers)
This topic contains information concerning compliance with regulations of radio and television interference.
For United States of America customers
Federal Communications Commission (FCC) Part 15 Information This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules (CFR 47:Part 15:B:2013). These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Vicon Motion Systems Ltd is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For Canadian customers
Conformity to the Canadian Interference-Causing Equipment Regulations
This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations ICES-003:2004.
Environmental regulations (EU customers)
Restriction of the use of certain hazardous substances in electrical and electronic equipment – RoHS and recast (RoHS 2) This equipment is fully RoHS- and RoHS 2-compliant. RoHS Directive 2002/95/EC provides that new electrical and electronic equipment put on the market for the first time from 1st July 2006 should not contain lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB), or polybrominated diphenyl ethers (PBDE). The European Union Directive 2011/65/EU provides that new electrical and electronic equipment put on the market for the first time from 3rd January 2014 shall not contain more than permitted levels of lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls (PBB), or polybrominated diphenyl ethers (PBDE; PentaBDE, OctaBDE; DecaBDE), Mercury (Hg).
REACH Declaration of Conformity
Vicon Motion Systems Ltd is a manufacturer of electronic hardware. We are therefore considered a “downstream user” as far as the REACH document is concerned. Vicon Motion Systems Ltd is therefore not obligated to register with the European Agency for Chemicals ‘ECHA’. Products sold by Vicon Motion Systems Ltd are “articles” as defined in REACH (Article 3 Definitions). Moreover and under normal and reasonably foreseeable circumstances of application, the articles supplied shall not release any substance. For that, Vicon Motion Systems Ltd is neither obligatory for registration nor for the creation of material safety data sheets. In order to assure our customers of the continual supply of reliable and safe products, we ensure that our suppliers fulfill all requirements regarding chemical substances and prepared materials.
Waste Electrical and Electronic Equipment (WEEE)
(Applicable in the European Union and other European countries with separate collection systems) The use of the symbol as a marking on the equipment, accessories or literature indicates that this product and its electronic accessories (e.g. USB cable) may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Household users should contact either the retailer where they purchased this device, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchasing contract. This device and its electronic accessories should not be mixed with other commercial waste for disposal.

EU Declaration of Conformity – Vicon Vue

Declaration of Conformity
Medical Devices Directive 93/42/EEC as amended by
EU Council Directive 2007/47/EC of 5th September 2007
Electromagnetic Compatibility to EMC Directive 2014/30/EU
Electrical Safety to Low Voltage Directive 2014/35/EU.

We, Vicon Motion Systems Limited Unit 6, Oxford Industrial Park Mead Road, Yarnton, Oxford, OX5 1QU
UNITED KINGDOM
declare that the Vue Video Camera as part of a Vicon Vantage or Vero Gait Analysis System manufactured by VICON MOTION SYSTEMS LIMITED in that the
Quality Management System has been approved by BSI Assurance UK Ltd for the manufacture and support of the aforementioned CLASS 1 Medical device This declaration of conformity is issued under the sole responsibility of the manufacturer. VICON MOTION SYSTEMS LIMITED has tested and demonstrated that all products of its own manufacture meet 2014/30/EU:
Electromagnetic Compatibility to: EN60601-1-2:2007
General Requirements for Safety to: EN60601-1:2006 + A12:2014
Software Development, Conformity and Support EN ISO 13485:2016 EN ISO 14971:2019 BS EN 62304:2006 + A1:2015, IEC 62304:2006/A1:2015

Thomas Shannon, TD PhD FIE (Aust), CPEng (Biomed.)
Director of Compliance
17th March 2021 Date of Expiration Validity of the MD727611 Certificate Not for use in an operating theater, anesthetic gas environment, or oxygen-rich environments. Not for use where there is a risk of compromising the essential performance of medical electrical equipment. Not suitable for use in high magnetic flux, ionizing radiation, dust ingress, high vibration, sterile, or life- or safetycritical environments.
Note: The overall installed system classification is defined by the highest risk device connected, which may include the connection of approved third-party
equipment such as electromyography apparatus by clients.

About your Vicon camera packaging The box in which your new Vue camera arrived has a foam insert that holds the camera. This insert prevents most damage that could be caused during shipping. We recommend that you retain this box as it provides the most convenient and safe way to ship your camera in future.

Contact Vicon:
Denver, CO
Vicon Denver
7388 S. Revere Parkway
Suite 901, Centennial
CO 80112, USA
T: 303.799.8686
F: 303.799.8690
E: [email protected]
Los Angeles, CA
Vicon LA
3750 S. Robertson Boulevard
Suite 100, Culver City, Los Angeles
CA 90232, USA
T: 310.437.4499
E: [email protected]
Oxford, UK
Vicon Oxford
Unit 6, Oxford Industrial Park
Mead Rd, Yarnton, Oxford
OX5 1QU, United Kingdom
T: +44.1865.261800
E: [email protected]

References

• Vicon Control | Vicon's Phone & Tablet Application
• FAQs - Vicon
• Downloads - Vicon
• docs.vicon.com/display/Connect/Vicon+system+setup+information
• Vicon (@viconmocap) • Instagram photos and videos
• Downloads - Vicon
• Vicon Control | Vicon's Phone & Tablet Application
• FAQs - Vicon
• Trademarks - Vicon

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>