ZANUSSI ZIC-B7800 Built-In Induction Cooktop Instruction Manual

ZIC-B7800
2-Zone Built-in Induction Cooker
Installation and Instruction Manual

Section 1

Introduction

Thanks for choosing MUSS 2-Zone induction hob. Please read these operating instructions carefully before installing or using the appliance. We hope that the following information will help you quickly familiarize yourself with the features of the appliance and use it successfully and safely. Any questions about our products or services, kindly call our local agent.

PRECAUTIONS AND ADVICE

1. This cooker complies with all applicable safety and electromagnetic compatibility legislations. However, people with pacemakers should avoid using the appliance. Please consult a doctor or the pacemaker manufacturer about your particular situation.
2. The appliance can become extremely hot: keep children away from it.
3. Always keep the cooking surface and bottom of pans/pots dry before use.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
6. Cleaning and maintenance by children is strictly prohibited.
7. WARNING: The appliance and its accessible parts become hot during use.
8. Children less than 8 years of age shall be kept away unless continuously supervised.
9. WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire.
10. NEVER try to extinguish a fire with water, but switch off the appliance and then cover the flame e.g. with a lid or a fire blanket. WARNING: Danger of fire: do not store items on the cooking surfaces.
11. Warning: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock, for hob surfaces of glass-ceramic or similar material which protect live pans.
12. A steam cleaner shall not be used for cleaning the surface.
13. Do not place metal objects such as kitchen utensils (knives, forks, spoons, …), lids or other similar items in the cooking zones as they can become very hot.
14. The danger of fire: Do not store items on the cooking surfaces.
15. CAUTION: The cooking process has to be supervised. A short-term cooking process has to be supervised continuously.
16. After use, switch off the hob element by its control and do not rely on the pan detector.
17. The appliance is not intended to be operated by means of an external timer or separated remote-control system.
18. Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
19. For installation. please refer to Section 3 Basic Installation (built-in) & Section 4 Installation and Connection.

Description of the Appliance

a. IH Cooking
The induction hob is based on the electromagnetic induction principle. After power on, lines of magnetic force create eddy currents in the pan/pot, causing the whole pan/pot to generate heat.
b. Benefits

1.  No gas, no flames, no smoke, no need to heat the air, you are free from concerning explosions, fires and bums as well as extra air-conditioning.
2. With higher energy efficiency than conventional electric cookers, you could enjoy saving cost and time by faster cooking.
3. Well protected from dirt and scratches, you could easily clean and maintain your appliance.

c. Parts Identification

1. Left Induction cooking zone
2. Right Induction cooking zone
3. Control panel
4. Ceramic glass top plate
5. Supply cord
6. Double pole switch box

d. Control Panel

e. Dimension of the cooking zone
Specified dimension of suitable cookware (Please refer to details in Chapter 2 regarding “Cookwares”)

Booster: 2.9
Right| 90 / 180| Normal: 1.4

For the testing of the energy efficiency scheme, a suitable pot should be used:

1. for the cooking zone on the left, a B4 pot (260mm) should be used.
2. for the cooking zone on the right, a B3 pot (200mm) should be used.

For the cooking zone on the left, use pots with a bottom diameter bigger than 220mm but not exceeding 260mm in order to get the most efficient performance of Grade 2 for IHs. For the cooking zone on the right, use pots with a bottom diameter bigger than 180mm but not exceeding 200mm in order to get the most efficient performance of Grade 2 for IHs.

Section 2
Usable and Non – usable Pans/Pots

1. Usable Pans/Pots

Induction Cooker works ONLY with pans/pots with a magnetic base.
a. Materials

1. Steel or cast iron with a magnetic base
2. Enameled iron
3. Stainless steel (18, 18-8, 18-10)
   

– A pan/pot with a bottom thickness of 0.8mm or thicker is regarded as “usable”, but less heat will be conveyed.
– Some multi-layer pans/pots may not be used on induction cookers.
b. Shape and size
– Flat-bottomed pans pots with a bottom diameter measuring greater than 90mm are recommended
– The diameter of the pan/pot base must be at least as big as the inner marking on the zone it is being used on.
– If the diameter of the base is too small, the induction heating will not work.
2. Non-usable Pans/Pots
a. Materials

1. Stainless steel without a magnetic base
2. Aluminum and copper
3. Heat-resistant glass or ceramic

b. Shape and size
– The pan /pot with a rounded bottom.
– The pan /pot with a concave of 4 mm or more at the bottom of the pan/pot with legs 4 mm or more in height.
– Small objects with dimensions less than 100x2Omm.

Note: Do not use pans/pots with the thin bottom on this appliance, and never heat up empty pans/pots, as that may cause damage to the pans/pots, or even the appliance.
Section 3

Basic installation

The voltage, rated load, and fusing are listed on the data plate Please make sure that these match your household supply mains.
a. dimensions of space to be provided for the appliance
b. Dimensions and positions of the means for supporting and fixing the appliance within this space.
c. Minimum dimensions of ventilation gaps

d. Connection of the appliance to the supply mains
The connection between the plug and the appliance should use the power cord provided by the manufacturer, which should not be longer than 1.5m. If the socket is not accessible after installation, an additional means of disconnection must be provided for all poles.
Note: If the power cord is damaged, it must be replaced by the manufacturer or its service department or similar professional in order to avoid the danger.

SPECIAL POINT TO NOTE ON INSTALLATION

Please do not disassemble the screws fixed on the two sides on the top of the ventilation point of the induction cooker. These two screws are fixed to ensure a gap of 10 mm is kept between the induction cooker and the kitchen cabinet, guaranteeing the induction cooker has good ventilation. The manufacturer is not responsible for any faults and problems caused by unauthorized disassembling.

Safety Precautions

The following safety precautions must be taken when installing or operating the appliance.

1. Before Use
   – Do not use it when the supply cord is damaged.
   – Do not attempt to modify the parts or repair the appliance by yourself if it is damaged in anyway.
   – Keep away from water and heat. Make sure there is sufficient space to be provided for the appliance.
   – The appliance is not intended to be operated by means of an external timer or separate remote-control system.
   – The appliance is for domestic use only, but not for commercial purposes.

2. Installation and Connection
   – All electrical work should be completed and inspected by a qualified technician in strict compliance with local safety regulations.
   – The appliance must be connected with its own specific power source, which should be installed in compliance with local wiring, earthing, and safety regulations. The manufacturer cannot be held liable for damage such as electric shock caused by the lack or inadequacy of an effective earthing system or any incorrect installation.
   – Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the appliance such as the prevention of overheating.
   – This appliance must not be installed over a dishwasher, washing machine, dryer, or fridge-freezer. The high temperatures radiated by the appliance could damage other electrical appliances below. resulting in impairing the appliance’s ventilation system.
   -A small gap may be visible between the ceramic glass edges and the worktop during the first few days after installation of the appliance.
   – This gap will reduce with time as the appliance is used. It will not affect the electrical safety of your appliance.

3. Protecting the appliance from damage
   – Do not drop anything on the ceramic surface. Even a small and light item could trigger electric shock or damage to the appliance in certain circumstances. If the ceramic surface is cracked, please immediately switch it off. unplug the appliance and contact your local qualified technician for service.
   – Make sure that only one sensor control is touched at a time. Do not put hot things or pans on the sensor control as the appliance may react wrongly.
   – Do not place metallic objects such as knives, or forks. spoons, lids. cans and foils on the top plate since they could get hot.
   – Do not place paper between the pan/pot and the appliance. The paper may get burnt.
   – Do not heat the empty pans/pots or overheat them.
   – Never place hot pans/pots near the control area, They could damage the electronic controls underneath.
   – Do not block the air intake or exhaust vent, which may cause the temperature inside the appliance to rise. The overheating protection will activate and the appliance will stop functioning automatically.
   – If a drawer is fitted directly underneath the appliance. ensure to keep adequate space between the contents in the drawer and the underside to the appliance to ensure sufficient ventilation for the appliance.

4. Protecting the appliance from Burning
   – The surface of the appliance is hot when in use and remains hot for a while after being turned off or removing the pan/pot: Mere is still a chance of getting burnt until the residual heat indicators go out. Children should be kept away from the appliance.
   – Clean the appliance only when it has cooled down.
   – Keep all pans/pots out of reach of children, Turn pan-handled inwards and away from the edge of the appliance.
   – Never leave the appliance unattended when cooking with fat or oil. Very hot oil can catch fire and cause damage to other electrical appliances. Always heat fat bit by bit, keep watching as it heats up.
   – Do not store anything above or next to the appliance which might arouse children’s interest, otherwise, they could be tempted to climb onto the appliance with the risk of getting burnt
   – In case oil or fat catches fire, do not put out the flames with water. Use a suitable fire blanket of fire extinguisher.
   – Do not heat up unopened tins of food on the appliance as pressure will build up in the tin and it can explode, which in the tire could result in injury and scalding or damage.

5. Cleaning and Care
   Unplug the appliance before cleaning and installing.
   – Never use a steam cleaner or aggressive or abrasive detergent to clean this appliance. They could cause permanent damage to the surface and the components, of which the manufacturer cannot accept the liability.
   – Do not use washing-up liquid on the ceramic surface as it can leave a blue sheen on the surface which may be difficult to remove.
   – Do not scratch on the ceramic surface.
   – The ceramic surface should be cleaned regularly, preferably after each use.
   – Before cleaning, firstly let the appliance cool down. Then, wipe all coarse soiling off using a damp soft cloth or kitchen paper towel and apply a few drops of proprietary-cleaning agent for ceramic surfaces.
   -Any remaining trace of clean could have a corrosive effect on the appliance when it is heated up next time. Make sure that each trace has been removed from the surface by wiping the surface carefully and thoroughly with a damp cloth after cleaning.

6. Further Safety Notes
   -Always keep children away from the appliance. Children should be supervised to ensure that they do not play with the appliance.
   – Ensure the cable of the appliance does not touch the hot cooking zone when using an electric socket near the appliance. The insulation on the cable could be damaged, giving rise to an electric shock hazard.
   – Ensure pans if pots are placed centrally over the cooking zone to prevent unnecessary exposure to the electromagnetic field.
   – Do not lay objects, which are susceptible to magnetic fields such as credit cards, or diskettes in the immediate vicinity of the appliance.
   – Spray canisters. aerosols and other inflammable substances must not be stored in a drawer under the appliance.
   – Cutlery must be heat-resistant.
   -The assembling and disassembling of this appliance should be carried out in accordance with the local wiring rules.
   – If the supply cord is damaged, it must be replaced by the manufacturer, local agent, or qualified technicians in order to avoid any hazard.
   -This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
   -After cooking. pans/pots should be removed from the appliance.
   – Disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
   -After use, switch off the appliance element by its control and do not rely on the pan detector.
   – Control panel could only be connected to the specific heating element in order to avoid a hazard.

Correct Disposal of his product

****| This marking indicates that this product should not be disposed of with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device.
please contact the retailer where the product was purchased. They may take this product for environmentally safe recycling.

Warning: To avoid electric shock, cut the power immediately when the cooktop is cracked, and call a qualified technician for service.
Section 5
Operation Manual

Product Specification

1.1 Voltage: 220-240V/50Hz
1.2 Suitable Environment: -25°C to 40°C
1.3 9 levels of power control
1.4 Power: 3.5 kW

Functions

2.1 On/off control sensor When the appliance has been connected to power, pressing the button ( ), will set the appliance to the functioning module. Two LEDs display V simultaneously. If there is no control instruction given in 20 seconds after the appliance is turned on. the control sensor will automatically be turned off accompanied by a buzzing notification.
2.2 Power level setting
2.2.1 Power level is displayed by two LEDs. The LED on the left represents the power of the cooking zone on the left. The LED on right represents the power level of the cooking zone on the right. Users can control the power setting by touching the sensor (— and +) for increasing or decreasing the power of the corresponding cooking zone. 2.2.2 Every time the ( ) key is pressed, ( ) the two LEDs will display “0′. Put a suitable pan/pot on the ceramic surface, then press the key ( )) to select desired cooking zone. Start choosing the power level by pressing ( — ) form “0” to V the highest level. Mother touch will reduce the power level from “9” to “8- and each subsequent touch will reduce the power until it comes to “0”. If ( +) is pressed on, the power level will start from level 4. Each subsequent touch will increase the power by one level up until it reaches “9”. Every time you want to set the power level of the cooking zone you will need to press the ( ) button first.
2.2.3 The 2 cooking zones have 14 levels of power. Where the power of the left cooking zone is set at 9, the maximum power of the right cooking zone will be at level 5.
2.2.4 Boost function, left cooking zone has a boost function, the user can directly touch the left select key twice ( ), triggering the boost function. an alphabet “p” will be displayed on the left display band simultaneously. Exit the boost function by touching the level minus key, the boost function time is 8 minutes, after the time limitation, the level will jump to level 9. if you want to use the boost function again, you can touch the left select key ( ) again.

2.3 Timer
2.3.1 If you need to set the cooking time, the user will need to press ( ) on the desired cooking zone, and the relevant LED will be lit. Press (—and +) keys at the same time, the two LEDs will display “00” now. At this time, press ( — and +) to set up your desired cooking time. The time setting shows “01.” – “99.” (minute) and ‘2h-5h” (hours), If the user wants to set the time beyond 99 minutes,99 minutes, one will need to press ” + ” again, so the timer will be increased to set at 1-hour intervals.
2.3.2 Time setting function has been set up for both cooking zones, the display for “time set” will only show the balance cooking time pre-set for the cooking zone chosen earlier. If within 10 seconds, there is no control instruction detected, the timer will start counting down. 2.3.1 Cancelling the timer function Press (— and +) keys at the same time, Set the timer to “00’ will turn off the timer. Switch off the cooking zone or turn the power level to “0”.
2.4 Safety lock
2.4.1 This model of induction cooker is a power-sharing one, the safety lock is also shared by the left and the right cooking zones. Pressing the safety lock again will discharge the lock.
2.4.2 For the safety of children and for the avoidance of danger caused by accidental activation / changing the operation, after finished cooking, the user may press the ( ) button, hold it once (for 3 seconds) to lock up the adjustment by pressing the key , — + so that the time for cooking cannot be adjusted when the safety lock is functioning, the indicator lamp will be lit up.
2.4.3 When the safety lock is activated, if the user pressed the ( ) button for over 1-second control sensor will be automatically shut down (but the safety lock status has not lost its function). After the appliance has been shut down, the indicator lamp for the safety lock will be out when the user activates the appliance again, the indicator lamp for the safety lock will light up again, hinting that this appliance is still under the safety lock, Otherwise, if there is no control instruction detected, the appliance will be automatically shut down after 20 seconds.
2.4.4 Discharging the safety lock: when the appliance is turned on or at start mode, under the safety lock status, press the safety lock key for 1 second will discharge the safety lock and the indicator lamp for the safety lock will be out.
2.5 Residual heat indication After the appliance is turned off and the temperature is above 65°C, the LED on the relevant cooking zone will show “H” on the display, During this time, the user should not touch the cooking zone directly until the indicating lamp “Fl” goes out.
2.6 Continuous working of ventilation fan
When the appliance is turned off, the ventilation fan in it will keep working to remove hot air inside the appliance. The working time of the ventilation fan will be decided in accordance with the temperature inside the appliance, there is no set rule as to how long the fan will keep working.
2.7 Error Code and Troubleshooting
2.7.1 When continuously pressing on a key for 10 seconds or continuously pressing two keys for 10 seconds, the error code “ ” will be displayed on the LED, and the appliance will stop heating coupled with continuous buzzing for around 2 minutes. The error code will be displayed continuously until the key (s) is/are released. 2.7.2 Error code on the cooking zone will be displayed on LED intermittently, the possible error codes are tabled.
below:

Error Code
Display| Description| Possible Cause| Remedy
---|---|---|---
E2| Temperature limits are excessed.| The pot or glass temperature is too high.| The system must cool down.
E3| The cooking zone working status is not stable.| Unsuitable pot or module failure.| The module has to be changed if the error comes after restarting the cooking zone.
E4| Unconfigured induction module| The induction module is not configured.| 1. Delete the appliance configuration and activate the manual configuration.
2. If the listed points are not successful, replace the module.
E5| Induction module failure.| Induction module failure.| Induction module failure, replace the module.
E6| Main power
disturbance| Wrong power mains for induction.| Check power and line connections to see if the connections are ok, replace the module.
E8| Fan failure| Fan failure| Check if the fan is blocked, if not replace the module.
E9| Defect T sensor on indicator or heatsink| Sensor signal out of valid range: sensor or electronic is defective.| Replace the module.
EH| Fixed sensor value (test function for T sensor on indicator)| Not enough temperature change after switching on the appliance.| The system must cool down.
Others| Induction module failure.| Induction module failure.| Need professional repair.

Specifications

ZANUSSI is a registered Trademark used under license from AB Electrolux (pub!).
Sole Agent DAH CHONG HONG, LTD.
4/E, DCH Building, 20 Kai Cheung Road, Kowloon Bay, Hong Kong.
Service-Hotline: 3193 9888 3193 9888

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>