Trihear TH-L12M Clip Pro Pocket Amplifier User Manual
- June 5, 2024
- Trihear
Table of Contents
Clip Pro Pocket Amplifier User Manual
Model: TH-L12M
Thank you or purc using your new TH-L12M C ip Pro Poc et Amp i yr. his user manual will provide you with all of the information you need o get started with your Clip Pro Pocket Amplifier. f you have any problems setting up or using your Clip Pro Pocket amplifier, please contact us by email at: [email protected] or scan the QR code to log in to our website: ttps://www.trihear.com
package Contents
Product Overview
- Type-C
- Mice
- Mode Switch
- LED
- Volume +
- Volume –
- Back Clip
- Power On/Off
- AUX Port
- Charging Port
- LED
- Power On/Off
Product Specifications.
- Power input: 5 V=1 A .
- Charging Port: Type-c .
- Frequency response range (Hz) : 200-6000.
- Equivalent input noise (dB) : ≤25+3 .
- Total harmonic distortion: ≤3%+ 3% .
- Maximum saturated sound pressure level OSPL90 (dB): 1203±3.
- High frequency average OSPL90 (dB) : 116±3
- .HFA Full of Gain (dB) : 40
- Hearing amplifier working time: 26hrs
- TV Adapter working time: 8hrs
How to use
-
Hearing Amplifier Charging
Please charge the device with included Type-C Cable, the estimated charging time is 45 mins.
*Power adapter not included, please use regular 5V DC adapter) We recommend you fully charge the device before first use)
-
TV Adapter Charging
Please charge the device with included Type-C Cable, the estimated charging time is 2hrs.
Power adapter not included, please use regular 5V DC adapter) We recommend you fully charge the device before first use)
Note TV adapter cannot be used during charging. -
Connect Earphones
Please insert the included Type-C earphones in the hearing amplifier.
-
Wearing.
1 Please choose suitable domes from 5/Ma size (M size is equipped by default)
2 Attach the domes to the earphones (no need if you choose M size)
3 Put the earphones in the ears
-
You could use either clip or lanyard when wearing
-
Hearing Amplifier Power On
Switch to ‘on’ to power on the device, Voice prompts indicate battery status.
Note: Please wear earphones before turning on the device. -
Volume Adjustment for hearing amplifier
(1) The left and right channels can be adjusted separately, single click V+/V- button to adjust the volume until you feel comfortable.
(2) Each time you click, there will be a ‘beep’ tone, and you will hear voice prompts: “maximum volume” or “minimum volume” when reached maximum/minimum volume.
-
Mode switch
A. Hearing Mode
Once power is on, the default mode is “hearing mode”, you can adjust the volume separately according to the guide above.
As for “Hearing Mode”, the Clip Pro amplifier supports two sub-modes: “indoor mode” and “Outdoor Mode”.
B. TV Mode
a. TV Adapter Connect To TV
Please connect the TV Adapter to the TV with included 3.5mm AUX Cable.
b. TV Adapter Power On
Long press the power button on the TV adapter for 3s to power on.
c. Long press the hearing amplifier ‘0’ button for 2s to switch to TV mode,
you can hear Voice prompts ‘please open TV adapter’, then wait for the hearing
amplifier to auto-connect TV adapter, once connected you will hear voice
prompts ‘TV mode’, now you can enjoy TV programs.
d. Volume Adjustment for watching TV
- Adjust the volume on the hearing amplifier (you could press either the volume control button on the left or right side, the left and right volume will stay at the same level);
- Adjust TV volume with the TV remote control.
e . You can switch back to hearing mode via long pressing the hearing
amplifier ‘0’ button for 2s.
Note: Kindly remind that the hearing mode is the default after power on,
and it will remember the volume you use last time.
FAQ
Q: How long does it take to fully charge the hearing amplifier?
A: It will fully charge in 45mins.
Q: Could it be used with other Type-C earbuds or earphones?
A: No, you need to use included earphones and type-C cable (IMPORTANT: the
earphones is customized for the hearing impaired ), in case of no sound or bad
performance problems.
Q: Hearing amplification is not good.
A: Please adjust the volume by clicking V+/V- button to your suitable volume.
Q: I could hear my own voice loudly.
A: You could adjust the hearing amplifier position to make the Mic far from
your mouth.
Q: I couldn’t hear other people talking in a noisy environment.
A: Please make sure Mic faces the people you want to hear.
Q: No sound from the receiver.
A: Please check if the Mic is blocked, or the Type-C port is blocked, make
sure the switch is slid to ‘on’.
Q: Cannot connect the hearing amplifier with TV adapter.
A: 1. Make sure your hearing amplifier and TV adapter both power on.
2. Long press the hearing amplifier ‘0’ button for 2s to change into TV mode.
3. If still have any problems please feel free to contact us via :
[email protected]
Q: The volume of the TV is still not loud enough via the hearing amplifier
is at maximum Volume.
A: Turn up the TV volume using the TV Remote Control.
Q: Disconnected when Move TV adapter.
A: The connection distance is within ten meters, place the hearing amplifier
to be connected close to the TV adapter.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Safety Instructions
| 1. Avoid dropping.
2. Do not disassemble.
---|---
| 3. Do not submerge in water.
4. Avoid extreme temperature.
| 5. Do not use the device outdoors during thunderstorms.
6. Use original or certified USB cables.
| 7. Do not use any corrosive cleaner/oil to clean.
8. Avoid using excessive volume for a long time.
| 9. Avoid thermal radiation, take off when near NMR, MRI, CT scanner, or
other medical machines.
| 10. Dispose of old appliances according to local regulations.
Correct Disposal of This Product
( Waste Electrical& Electronic Equipment )
This marking is shown on the product or its literature, indicating that it
should not be disposed of with other household wastes at the end of its
working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of waste
and recycle it responsibly to promote the sustainable reuse of material
resources. Household user should contact either the retailer where they
purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business
users should contact their suppliers and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial
wastes for disposal.
Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
https://trihear.com/
https://www.trihear.com
[email protected]
Manufacturer: Trihear Technology Co., Ltd.
Manufacturer Address: Room 704, Building 11, Phase
II, Yungu, No. 2, Pingshan 1st Road, Taoyuan Street,
Nanshan District, Shenzhen