ANKER B2538 Wireless Charging Stand Instruction Manual

ANKER B2538 Wireless Charging Stand

LED STATUS

The right and left lights: Solid blue

The middle light: Flashing blue

|

Overvoltage or undervoltage protection activated

SAFTEY WARNING

• You cannot charge your device wirelessly in these scenarios: When using a case with a magnetic/iron plate;
• When using a case with a pop socket;
• When using an ultra-thick (> 5 mm) protective phone case. Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter.
• Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
• Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
• Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.

Important Safety Instructions

Please refer to the electrical and safety information on the  bottom before installing or operating the product.

•  Avoid dropping.
•  Do not disassemble.
•  Do not expose to liquids.
•  For the safest and fastest charge, use original or certified cables.
•  This product is suitable for moderate climates only.
•  The maximum ambient temperature during use of this product must not exceed 40°C.
•  Open flame sources, such as candles, must not be placed on this product.
•  Only use a dry cloth or brush to clean this product.
•  The socket-outlet shall be installed near the product and shall be easily accessible.
• Disconnection from line voltage should be made via the AC plug.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Product Name: Anker 533 Wireless Charger (3-in-1 Stand)
Model: A2538
The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973

IC Caution
Radio Standards Specification RSS-Gen, issue 5
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The equipment complies with IC Radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 10cm between the radiator and your body.

To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2538 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com/
This device in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out.
1.The device complies with RF specifications when the device used at 20cm form your body.

GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2538 is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address:
https://www.anker.com/

Specifications

Output

| Wireless: 5W / 7.5W / 10W (for phones) 5W Max (for earbuds)

USB-A: 5W Max

Operating Temperature| -10°C – 40°C

Radiated H-Field

| Radiated H-Field(for phones):9.44dBuA/ m(@10m)

Radiated H-Field (for earbuds) :-1.7dBuA/ m(@10m)

TX/RX Frequency Range| 110-205KHz (for EU / UK only)

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and U matters)
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

For FAQs and more information, please visit:
anker.com/support

support@anker.com
support.mea@anker.com

(For Middle East and Africa Only)
(US) +1 (800)988 7973 Mon-Fri 6:15 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00-17:00;
Sat-Sun 6:00-14:00
(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00
(Middle East & Africa)
+971 42463266 Sun-Thu 9:00 – 17:30
(UAE) +971 8000320817 Sun-Thu 9:00 – 17:30
(KSA) +966 8008500030 Sun-Thu 8:00 – 16:30
(Kuwait) +965 22069086 Sun-Thu 8:00 – 16:30
(Egypt) +20 8000000826 Sun-Thu 7:00 – 15:30
(AU) +61 3 8331 4800 Mon-Fri 8:30 – 17:00 (AEST)
(TR) +90 0850 460 14 14 Mon-Fri 9:00 – 18:00
(RU) +8 (800) 511-86-23 Mon-Fri 9:00 – 18:00 (MSK)

References

• Anker | Live Charged. - Anker Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>