Shenoy Audio SH010 Active Noise Cancelling Wireless Headset User Manual

SH010 Active Noise Cancelling Wireless Headset

User Manual

Specifications

• BT Version: 5.0
• Protocol: HSP/HFP/A2DP/AVRCP
• Music Playback Time (ANC off): 25-30 hours
• Talk time (ANC off): 25.30 hours
• Range: 10 meters
• Frequency Range: 20Hz-20kHz
• Speaker Impedance: 320
• Charging Time 1.5.2 hours
• Battery Capacity: 37V/500mAh

Features

1. ANC Active Noise Cancelation: feedforward and feedback noise cancelling effective noise reduction.
2. Wireless Stereo: Support wireless devices and support stereo music
3. Handsfree. High quality mice calling.
4. Auto-reconnect Auto-reconnect after power on if connected before.
5. Compatibility: Compatible to most of wireless devices in the marker.
6.  Rotatable, Retractable: suitable for most of head style of people, comfortable wearing.
7. Long standby time: Powerful battery life

Please read carefully the manual before using and keep it as a record

Know Your Headset

1. ANC ON/OFF
2. ANC Indicator
3. 3.5mm Audio Port
4. Type-C Charging Port
5. VOL – / Previous Song
6. MFB (Multi-Function Button)
7. VOL + / Next Song
8. Indicator

Package Contents

1. Wireless headset
2. User manual
3. USB to Type-C Charging cable
4. 3.5mrn audio cable

Headset Pairing

1. Power on and pairing

Press and hold the MFB ” ” 3 sec, light flashes blue then red and blue light flashes In turns, enter the pairing mode.

2. Connecting

Headset pairs with  Smartphone, Voice , prompt “connecting”, . the light remains blue. Connecting successful blue light flashes slowly.

3. ANC on

Slide the switch to the top to turn on the ANC the light remains green

Scalable

Scalable, to fit different types of head, make sure to wear comfortable

Product Instructions

Power off.
In the state of power-on, press and hold the MFB “ ” at least 3 sec, the red light will flash once and with the voice prompt of “power off “.

Paring
In the state of power-off, press and hold the MFB” ” 3 sec, the light flashes blue, headset enter reconnected, if without reconnecting headset enter pairing mode, red light and blue light flash in turns. You can connect with your target device right now

*Reconnect If the headset is already connected to the previous device, when reopen It will automatically be connected to the previous device.

Pairing status:
Red light and blue light flash in turns.

Connecting:
Voice prompt: “Connecting”, light remains blue. Connecting successfully blue light flashes slowly.

Last number redial:
Press MFB ” ” twice when headset is standby, It will redial the last number.

Answer/end phone calls:
Press MRB “ ” once to answer the phone call Press MFB”0″ once to end the phone call.

Reject the phone calls:
Press MFB” ” 2 seconds to reject the phone call

Play/pause:
Press MFB” ” once to play/pause the music.

Previous song/next song:
While listening to the music, press and hold “ ” button to skip to the previous song. Press and hold “ ” button to skip to the next song.

Volume up/volume down:

While playing the music, short press “ ” button to reduce the volume. Short press “ “. button to increase the volume.

Low battery warning/Power off:
Low battery on headset, the light flashes blue continuously. When the battery runs out, the headset will power off.

Indicator:
When charging the light remains red. When full-charged, The indicator light will change from red to blue.

Noise Cancelling:
Slide the switch to the top to tum on the ANC, the light remains green. Slide the switch to the bottom to turn off ANC, the green light is off.

*The headset will power off if there is no connection within 5

Attention

1. When use the audio cable to connect this headset with the device, the function of this wireless headset is same as the wired type. The ANC button is still working while all other buttons become disabled.
2. If headset doesn’t work please check lithe battery is exhausted, please charge it fully first.
3. To guarantee the battery life, please paver off the headset if not in using. Please charge the headset with the equipped cable.
4. Please charge the headset if not in using for long time.
5. Please don’t change the built-in battery by yourself.
6. Please don’t put the headset under wet or rainy place.
7. Please don’t expose the headset under the blazing sun, event not dose fire to avoid battery accident.
8. Please don’t twist the headset in reverse direction.
9. Please don’t disassemble the headset if unprofessional.
10. When headset Is not using state, please turn off the ANC switch to avoid loss of power.

Downloads

SH010 Active Noise Cancelling Wireless Headset Manual -[Downloads PDF ]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>