ANKER A8371 PowerExpand Direct 7-In-2 USB-C PD Media Hub User Guide
- June 5, 2024
- Anker
Table of Contents
Welcome Guide
PowerExpand Direct 7-in-2 USB-C PD Media Hub
User Manual
At a Glance
| Item | Description |
|---|---|
| 1. USB-C connector | Plug into the MacBook’s USB-C port |
| 2. HDMI port | Connect to a device with an HDMI port to stream video at |
resolutions up to 4Km30 Hz
3. Power indicator| Turns white when powered on
4. Multi-function port (USB-C port)|
- Connect to a USB-C charger to provide pass-through charging for your MacBook
- Connect to a USB-C device to transfer data at speeds up to 40 Gbps
- Connect to one monitor directly (two monitors via an HDMI adapter) to stream video at resolutions up to 5K060 Hz
5. USB-A port| Connect to a USB-A device to support data transfer at speeds
up to 5 Gbps
6. USB-C port| Connect to a 1..1513-C device to support data transfer at
speeds up to 5 Gbps
7. SD 3.0 card slot| Insert an SD 3.0 card to copy files to and from your
MacBook
8. microSD card slot| Insert a microSD card to copy files to and from your
MacBook
Using Your Hub
To transmit video signals via the HDMI port, use an HDMI. cable (not included).
The SD card slot supports SD, SDHC, and SDXC card types up to 2T8, at speeds up to 104MB/s.
| Data Speed| 40 Gbps
---|---|---
| Supported Systems| Windows 10 / 8 / 7 / Vista / OS XP, Mac OS X 10.2 (and
above), Chrome OS
| Size| 120 X 29 X10 mm 4.7 X1.1 X 0.4 in
| Weight| 63g/ 2.2 oz
Important Safety Instructions
• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
• For the safest and fastest charge, use original or certified cables.
• This product is suitable for moderate climates only.
• The maximum ambient temperature when using this product must not exceed
104°F / 40°C.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A8371 is in compliance with Directive 2014/30 /EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.ankercom
Anker Technology (UK) Ltd I Suite B. Fairgate House. 205 Kings Road,
Tyseley, Birmingham, B11 2AA, United Kingdom
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3-5, 80807
Munich, Germany
Anker Innovations Limited
Room 1318-19, Hollywood Plaza. 610 Nathan Road, Mongkok, Kowloon, Hong Kong
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A8371 is in
compliance with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
Electromagnetic Compatibility Regulations 2016
The full text of the GB declaration of conformity is available at the
following internet address: https://www.ankeccom
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, 611 2AA, United
Kingdom
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warring: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Customer Service
| 18-Month Limited Warranty
---|---
| Lifetime Technical Support
| support@anker.com
| (US) +1(800) 988 7973 Mon-Fri 9:00am – S:00pm (PT)
(UK) +44 (0)1604 936200 Mon-Fri 6:00.11:00 (GMT)
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
For FAQs and more information, please visit:
anker.com/support
@Anker
@Anker Japan
@Anker Deutschland
Product Number: A8371
PowerExpand Direct 7-in-2
USB-C PD Media Hub
51005002840 Vol.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>