hama 00047771 Surge Protection Adapter Instruction Manual
- June 5, 2024
- Hama
Table of Contents
hama 00047771 Surge Protection Adapter
Operating instruction
Take your time and read the following instructions and information completely. Please keep these instructions in asafe place for future reference.
Safety Notes
The product is intended for private, non-commercial use only.The product is
intended for indoor use only.Use the product for its intended purpose only.
Children are not permitted to play with the device. Protect the product from
dirt, moisture, and overheating, and only use it in an adry environment. The
product may only be operated with the type of power supply network described
on the nameplate. Only connect the product to a socket that has been approved
for the device. The electrical socket must always be easily accessible. The
overvoltage protector may be operated only on a a16Afused mains socket with a
properly installed protective conductor. Do not connect to extension cables,
power strips or adapters. Never connect multiple units of this product in a
series. Disconnect the product from the network using the power button –if
this is not available, unplug the power cord from the socket. Do not continue
to operate the device if it becomes visibly damaged. Do not attempt to service
or repair the product yourself. Leave any and all service work to qualified
experts.
Proper use
The built-in overvoltage protector is designed for mains-related overvoltage
caused by switching processes or distant lightning strikes. Additional
measures must be taken to safeguard against direct lightning strikes. Coarse
protection (requirement clause) must be provided for in the buildings
electrical system. The primary intended purpose of the product is to protect
high-quality telephone and computer systems and audio, video and satellite
devices.
Connection
All devices must be switched off before devices can be connected. The
overvoltage protector may be connected only between the electrical consumer
and an earthed socket. In the operational state, the indicator light for the
overvoltage protector lights up.
Warning:
If the indicator light is not lit after switching on, the overvoltage
protector is defective –itmay no longer be used and must be exchanged for anew
overvoltage protector.
Insurance cover of 20 million euros
Our product liability insurance provides cover of up to 20 million euros for personal injury and damage to property.The prerequisites areproper product use (please note the safety information) and proof that the damage is attributable to non-compliance with the described protective function (please see the technical specifications on the type plate and in these operating instructions).
Service and Support
Please contact Hama Product Consulting if you have any questions about this
product.
Hotline: +49 9091 502-0 (German/English)
Further support information can be found here: www.hama.com
Technical Data
- Overvoltage protection Up: P-N=1.8kV; P/N-E=2.5kV / Uc: 255V~ 50Hz Uoc: P-N=2.5kV; P/N-E=5.0kV Type III
- Total leakage current 13.500 A (3 x 4.500 A)
- Mains supply 250 V ~ / 16 A
- Connected load max. 3500 W
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>