KeylessOption Keyless Entry Remote Control Car Key-Complete Features/Instruction Guide
- June 5, 2024
- KeylessOption
Table of Contents
KeylessOption Keyless Entry Remote Control Car Key
Specifications
- BRAND: KeylessOption,
- ITEM WEIGHT: 0.704 ounces,
- PRODUCT DIMENSIONS: 2 x 0.75 x 4 inches.
Introduction
The battery, electronics, and transponder chip are all included in this brand- new keyless entry remote ignition key set (which will start your car). In terms of both form and function, this replacement part is a perfect match for the original. Please double-check the vehicle compatibility information because some remotes may appear to be identical but are not. Also, double- check that the buttons on your original remote are the same. It is compatible with following models:
- 2001-2012 Ford Escape
- 2007-2009 Ford Crown Victoria
- 1998-2003 Ford Escort
- 1998-2012 Ford Expedition
- 1998-2013 Ford Explorer
- 2001-2010 Ford Explorer Sport Trac
- 2005-2007 Ford Five Hundred
- 2000-2012 Ford Focus
- 2006-2012 Ford Fusion
- 1999-2012 Ford Mustang
- 1999-2011 Ford Taurus
- 2002-2005 Ford Thunderbird
- 2003-2005 Lincoln Aviator
- 2000-2006 Lincoln LS (dealer program only)
- 2001-2012 Lincoln Navigator
- 1998-2009 Lincoln Town Car
- 1999-2002 Mercury Cougar
- 2007-2011 Mercury Grand Marquis
- 2005-2011 Mercury Mariner
- 2005-2007 Mercury Montego
- 1999-2005 Mercury Sable
- 1999 Mercury Tracer
How to Program a 2012 Ford Escape Keyless Entry Remote Fob Smart Key
You must be able to access two previously programmed keys as well as the new unprogrammed key.
- Start the car with the first previously programmed key.
- Turn the ignition key to the on position. Turn on the ignition for at least three seconds, but no longer than ten
- Remove the first programmed key from the ignition and turn it off.
- Insert the second previously programmed key into the ignition after three seconds but before ten seconds has passed since the ignition was turned off.
- Turn the ignition key to the on position. Turn on the ignition for at least three seconds, but no longer than ten.
- Remove the second previously programmed key from the ignition and turn it off.
- Insert the new unprogrammed key into the ignition after three seconds but no more than ten seconds after turning off the ignition and removing the previously programmed key.
- Turn the ignition key to the on position. For at least six seconds, keep the ignition turned on.
- Turn off the ignition with the freshly programmed key. If the key is programmed correctly, it will start the car and operate the remote entry system (if the new key is an integrated keyhead transmitter). Wait 10 seconds before repeating Steps 1 through 8 if it was not correctly programmed.
Frequently Asked Questions
-
What is the best method for getting a key made with my VIN number? You can get an automobile key made without the original key. The simplest approach to replace lost car keys is to have a locksmith create a key by code using the vehicle’s VIN number. The VIN}number, which tells locksmiths how to cut the key, can be used to receive the original vehicle key cutting for the car.
-
What is the name for a key that isn’t a key?
A fob, sometimes known as a key fob, is a small security hardware device that has built-in authentication and is used to control and secure access to mobile devices, computers, network services, and data. -
How do I re-program my keyless remote control?
After pushing and holding the “lock” button on your car remote for one second, place the key in the ignition and turn it on. The lights should be turned off if the key is set to “Off.” -
How does one go about cloning a remote control?
Press and hold the Original Remote button you want to programme to the Copy Remote’s corresponding button, then press and hold the Copy Remote’s corresponding button. Hold down both buttons until the Copy Remote’s LED begins to flash rapidly. -
What steps need I take to program my Keylessoption key fob?
Before unlocking your driver’s door and hitting the Unlock button while it’s open, be sure all other doors are closed. 3. Within 8 seconds, press any button on the first keyless remote to be configured. The door locks will cycle to confirm programming. -
Is it possible to copy a remote vehicle key?
If you know what you’re doing, cloning a keyless entry remote to your car is a simple operation that takes less than five minutes. Preparing your unprogrammed remote to receive the keyless auto signal from your programmed remote is the most important step.