ELECOM M-CAD01UB Wired Mouse For 3D CAD (3 Buttons) User Manual
- June 5, 2024
- ELECOM
Table of Contents
Model: M-CAD01UB
Wired Mouse
Manual
Name and function of each part
-
Left button
To left-click on your PC. -
Right button
To right-click on your PC. -
Middle button
To middle click on your PC. -
USB connector (male)
-
Pointer speed change switch
To change the pointer speed. : 1200 dpi
: 600 dpi -
Optical sensor
Please note that looking directly into the sensor light may hurt your eyes.
Removing this product from your PC
This product supports hot plugging. The USB connector may be removed while the
PC is operating.
How to use the mouse
Start the PC.
Start the PC, and then wait for it to be ready to perform operations.
Insert the USB connector of the product into a USB port on the PC.
Any USB port may be used.
- Be sure to sufficiently check the connector orientation and the insertion location.
- If you feel strong resistance when inserting the USB connector, check that the shape and orientation of the connector is correct. Using excessive force may damage the connector and cause injury.
- Do not directly touch the terminal area of the USB connector.
The driver will be automatically installed, and you will then be able to use the mouse.
Supported OS| ® Windows 10, Windows ® 8.1, Windows ® 7, Windows ® XP (Updating the OS or installing a service pack may be necessary.)
- Compatibility information was retrieved during operation confirmation in our verification environment. There is no guarantee of complete compatibility with all devices, OS versions, and applications.
---|---
Resolution| 600/1200 dpi (switchable)
Interface| USB
Read method| Optical sensor method
LED| Blue
Dimensions (W × D × H)| approx. 71 × 110 × 38 (mm) * excluding cable
Cable length| approx. 1.5 m
Operational temperature/humidity| 5°C to 40°C/ up to 90%RH (without condensation)
Storage temperature/humidity| -10°C to 60°C/ up to 90%RH (without condensation)
Safety Precautions
Prohibited action
Mandatory action
The situation that needs attention
WARNING
If a foreign object (water, metal chip, etc.) enters the product,
immediately stop using the product, and remove the product from the PC. If you
continue to use the product under these conditions, it may cause a fire or
electric shock.
If the product is behaving abnormally, such as by generating heat, smoke, or a
strange smell, immediately stop using the product, shut down the PC, and then
sufficiently check whether the product is generating heat while being careful
to avoid being burned. Then, remove the product from the PC . After that,
contact the retailer from whom you purchased the product. Continuing to use
the product under these conditions may cause a fire or electric shock.
Do not drop the product or otherwise subject it to impacts. If this product is
damaged, immediately stop using it, remove the product from the PC. After
that, contact the retailer from whom you purchased the product. Continuing to
use the product while it is damaged may cause a fire or electric shock.
Do not attempt to disassemble, modify or repair this product by yourself, as
this may cause a fire, electric shock or product damage.
Do not put this product in fire, as the product may burst, resulting in a fire
or injury.
Do not insert or remove the connector with wet hands. Also, do not make
alternations to or forcefully bend the connector. Doing so may cause a fire or
electric shock.
CAUTION
Do not place this product in any of the following environments:
- In a car exposed to sunlight, a place exposed to direct sunlight, or a place that becomes hot (around a heater, etc.)
- In a moist place or a place where condensation may occur
- In an uneven place or a place exposed to vibration
- In a place where a magnetic field is generated (near a magnet, etc.)
- In a dusty place
This product does not have a waterproof structure.
Use and store this product in a place where the product body will not be
splashed with water or other liquid.
Rain, water mist, juice, coffee, steam, or sweat may also cause product
damage.
Do not use this mouse for any purpose other than for use with your computer.
Do not use this product with any device that may significantly be affected in
the case of this product malfunctioning.
If this product is used on a transparent surface such as glass or a highly
reflective surface such as a mirror, the optical sensor will not function
correctly and the mouse pointer movement will become unstable.
If this product is not going to be used for one month or longer, remove the
connector from the PC.
Avoid looking directly at the light of the optical sensor as doing so may
cause eye damage.
When you no longer need to use this product, be sure to dispose of them in
accordance with the local ordinances and laws of your area.
Cleaning the Product
If the product body becomes dirty, wipe it with a soft, dry cloth.
The use of a volatile liquid (paint thinner, benzene, alcohol, etc.) may
affect the material quality and color of the product.
Limitation of Liability
In no event will ELECOM Co., Ltd be liable for any lost profits or special,
consequential, indirect, punitive damages arising out of the use of this
product.
ELECOM Co., Ltd will have no liability for any loss of data, damages, or any
other problems that may occur to any devices connected to this product.
Compliance status
www.elecom.co.jp/global/certification/
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
In order to make an impResponsible party (For FCC matters only)
Around The World Trading Inc.,
7636 Miramar Rd #1300, San Diego, CA 92126
telecoms. comovements to this product, the design and specifications are
subject to change without prior notice.
Wired Mouse: M-CADOlUB
Equipment name Type designation (Type)
Unit| Restricted substances and its chemical symbols
Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent chromium (Cr+6)|
Polybrominated
biphenyls (PBB)| Polybrominated
diphenyl ethers (PBDE)
| | | | 0| |
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
| 0| 0| 0| 0| 0| 0
Note 1: “Exceeding 0.1 wt %” and “exceed 0.01 wt %” indicates that the
percentage content of the restricted substance exceeds the reference
percentage value of present condition.
Note 2: “C)” indicates that the percentage content of the restricted substance
does not exceed the percentage of reference value of presence. Note 3 : The
“-” indicates that the restricted substance corresponds to the exemption.
ELECOM CO., LTD.
www.elecom.co.jp/global/
ELECOM Korea Co., Ltd.
Dome-Bldg 5F, 60, Nambusunhwan-ro 347-gil, Seocho-gu,
Seoul, 06730, South Korea
TEL : +82 (0) 2 – 1588 – 9514
FAX : +82 (0) 2 – 3472 – 5533
www.elecom.co.kr| ELECOM Sales Hong Kong Ltd.
2/F, Block A, 2-8 Watson Road, Causeway Bay, Hong Kong
TEL : +852 2806 – 3600
FAX : +852 2806 – 3300
email: info@elecom.asia
---|---
ELECOM (SHANGHAI) TRADING Co., Ltd
Room 208-A21, 2nd floor, 1602 Zhongshanxi Road,
Xuhui District, Shanghai, China, 200235
TEL : +86 021-33680011
FAX : +86 755 83698064| ELECOM Singapore Pte. Ltd
Blk 10, Kaki Bukit Avenue 1,
02-04 Kaki Bukit Industrial Estate, Singapore 417942
TEL : +65 6347 – 7747
FAX : +65 6753 – 1791
- Unauthorized copying and/or reproducing of all or part of this manual is prohibited.
- The specifications and appearance of this product may be changed without prior notice for product improvement purposes.
- When exporting this product, check the export regulations for the country of origin.
- Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
- Mac OS and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
- Company names, product names, and other names in this manual are either trademarks or registered trademarks.
A customer who purchases outside Japan should contact the local retailer in
the country of purchase for inquiries.
In “ELECOM CO., LTD. (Japan)”, no customer support is available for inquiries
about purchases or usage in/from any countries other than Japan. Also, no
foreign language other than Japanese is available. Replacements willbe made
under the stipulation of the Elecom warranty, but are not available from
outside of Japan.
Wired Mouse
Manual, Safety precautions, and Compliance with regulations
2nd edition, February 8, 2022
©2020 ELECOM Co., Ltd. All Rights Reserved.
MSC-M-CAD01UB ver.112
Documents / Resources
|
ELECOM M-CAD01UB Wired Mouse For 3D CAD (3
Buttons)
[pdf] User Manual
M-CAD01UB, Wired Mouse For 3D CAD 3 Buttons
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>