VSTARCAM C24S Indoor Baby Monitor User Manual
- June 5, 2024
- VSTARCAM
Table of Contents
C24S Indoor Baby Monitor
User Manual
Video Tutorial
If it is your first time using our products, it is recommended to scan the QR code below to watch the video tutorial.
https://www.vstarcam.com/support/
Step 1: Pre-Setup
- Connect your phone to the WiFi network (2.4GHz only).
- Place the camera within 2 meters of the router during configuration.
- Power on the camera and wait for about 30 seconds to finish booting.
- If it is your first time connecting the camera, there is no need to reset it. If you cannot hear ” Please use APP for WiFi configuration” when the camera startups, please reset the camera. Reset method: Use a needle to hold on the reset button for about 5 seconds until you hear”Reset completed” （You can find the reset button in “Product Description”)
Step 2: APP Download and Registration
http://www.eye4.so/AppDown.html
-
Search for “Eye4” in App Store or Google Play, or scan the QR code to download the app.
-
Click “Register”, enter the user name and password to complete the registration, and also supports the third party such as Facebook to log indirectly.
Step 3: Add Devices to the APP
-
Open the app, click the “+” in the upper right corner, and scan the QR code on the body of the camera, then follow the prompts on the app to complete the adding. (Note: For Android phones, it will pop up some system permission window, please select “Allow”)
-
If you can’t find the QR code, click the “+” in the upper right corner, select “Others” on the bottom right corner — “IP Camera”— “Wireless installation”, then follow the prompts on the app to complete the adding.
You’re Done!
When you hear the camera prompts “Wireless connection is successful”, wait for
about 30 seconds, the binding page will appear on the app, click “Bind” to
complete the adding.
Note: If the connection fails, please try to add it with a network cable
connection, or seek assistance -nice from online customer service.
Please write down your device information:
Eye4 account name:———————————
Eye4 account password:———————————
Device Share
Click” ” on the right corner, then select “Device Share”— “QR Code Sharing”.
Other users can open the app and click the “+” in the upper right corner of
the homepage to scan the QR code to add the device.
Cloud Storage
The camera supports a cloud storage service. After activating the cloud storage service, when the motion detection is triggered, the video will be uploaded to the cloud storage server immediately, and the video can be viewed even if the camera is stolen.
After-Sales Service
If you have any questions, please contact our customer service: Click on “Me” in the lower right corner of the APP. Select “Online Customer Service”.
Online customer service：
AM 8:30-12:00 PM 13:20-17:50 Night 19:00-23:00 on weekdays (UTC+8)
Official Mall：https://shop.vstarcam.com/
FAQ: www.vstarcam.com/support
Email: support@vstarcam.com
References
- VStarcam - Support & Services
- VStarcam Mall:WiFi IP Cameras,Security Cameras,Smart Home - Under the authority of VStarcam!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>