ANKER A25A7 633 Magnetic Wireless Charger (MagGo) User Manual

: June 5, 2024
: Anker

Table of Contents

Important Safety Instructions
FCC Statement
Radiation Exposure Statement
IC Statement
RSS-Gen Issue 5 March 2019
RF exposure statement:
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

For FAQs and more information,
please visit:anker.com/support
Product Number: A25A7
51005003018 V01

| |
---|---|---
@anker_official
@anker_jp| @Anker Deutschland
@Anker Japan
@Anker| @AnkerOfficial
@Anker_JP

Using the Battery and the Base

Status| Wireless Charging Indicator on the Base| Wireless Charging Indicator on the Battery| Battery Level Indicator
---|---|---|---
Connected to power| Solid white for 3 seconds, then off| /| /
Battery placed on| /| /| Showing the current battery
level, with the highest power
indicator flashing
Charging your phone after placing the battery on| Lighting up one by one, then off| Solid blue| Showing the current battery
level, with the highest power
indicator flashing
Charging your earbuds| /| /| /
Metal objects detected| Flashing white quickly| Flashing blue quickly| Showing the current battery
level, with the highest power
indicator flashing

• Overvoltage or undervoltage protection
• Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter

| Only LED lights on the two sides flash white| Off| Off

Using the Battery Only

Status| Wireless Charging Indicator on the Battery| Battery Level Indicator
---|---|---
Activated| /| Lighting up one by one and then showing the current battery level
Being charged| /| Showing the current battery level, with the highest power indicator flashing
Fully charged| Solid blue, then off after 10 minutes| Solid blue, then off after 10 minutes
Wirelessly charging the iPhone 12 series or later| Solid blue| Showing the current battery level
Wirelessly charging the iPhone 12 series or later while being recharged| Solid blue| Showing the current battery level, with the highest power indicator flashing
Metal objects detected| Flashing blue quickly| Showing the current battery level
•Overvoltage or undervoltage protection
•Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter| Off| Off
Charging using a cable| Off| Showing the current battery level

This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards, or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
Wireless chargers make charging more convenient than wired chargers but confined by current wireless technology, their charging speed is slower than that of wired chargers.

Important Safety Instructions

**** Please refer to the electrical and safety information on the bottom before installing or operating the product.

Avoid dropping.
Do not disassemble.
Do not expose to liquids.
This product is suitable for moderate climates only.
The maximum ambient temperature during the use of this product must not exceed 40°C.
Open flame sources, such as candles, must not be placed on this product.
Only use a dry cloth or brush to clean this product.
For the included portable charger:
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not put fingers or hands into the product.
Do not expose to rain or snow.
Do not use in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
Do not use if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
Do not disassemble the portable charger. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
Do not expose to fire or excessive temperature. Exposure to fire or temperatures above 100°C may cause an explosion.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
Switch off the portable charger when not in use.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Product Name: Anker 633 Magnetic Wireless Charger (MagGo)
Model: A25A7
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973

IC Statement

This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

RSS-Gen Issue 5 March 2019

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF exposure statement:

The equipment complies with the IC Radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance
20cm between the radiator and your body.
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A25A7 is in compliance with Directives 2014/53/EU & 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A25A7 is in compliance with Electromagnetic Compatibility Regulations 2016, Radio Equipment Regulations
2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Electrical Equipment (Safety) Regulations 2016
& The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address:
https://www.anker.com
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other relevant provisions of the UKCA. All essential radio test suites have been carried out.
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out
1. The device complies with RF specifications when the device is used at 20cm form your body

Specifications

Cell Capacity	5,000mAh
Portable Charger	Input:

USB-C: 5V 2.4A / 9V 2.33A
Pogo Pin: 9V 2.33A Output:
USB-C: 12W Max
Wireless: 5W / 7.5W
Charging Base| Input:
USB-C: 9V 2.8A
Output:
Wireless earbuds: 5W Max
Pogo Pin: 21W Max
Wall Charger| Input:
100-240V 1A 50/60Hz
Output:
5V 3A/ 9V 2.8A
PPS 3.3-5.9V 3A / 3.3-11V 2.25A

Anker Innovations Limited
Room 1324-19, Hollywood Plaza,
610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road,
Tyseley, Birmingham, B11 2AA, United Kingdom