ANKER A1611 622 Magnetic Battery (MagGo) User Manual
- June 5, 2024
- Anker
Table of Contents
- ANKER A1611 622 Magnetic Battery (MagGo)
- At a Glance
- Charging Your Phone or Earbuds Using a Charging Cable
- Charging the iPhone 12 Series or Later
- Charging Your Device Wirelessly and Recharging Your Portable Charger
- Recharging Your Portable Charger
- Specifications
- IMPORTANT SAFETY INSTRUCTIONS
- FCC Statement
- Radiation Exposure Statement
- IC Statement
- RSS-Gen Issue 5 March 2019
- RF Exposure statement:
- Declaration of Conformity
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ANKER A1611 622 Magnetic Battery (MagGo)
At a Glance
1. Wireless Charging Indicator | 2. Battery Level Indicator |
---|---|
3. USB-C Port | 4. Power Button |
5. Fold-Out Stand |
Charging Your Phone or Earbuds Using a Charging Cable
Status | Wireless Charging Indicator | Battery Level Indicator |
---|---|---|
Charging | Flashing white | Showing the current battery level |
Fully charged | Off | Off |
Charging the iPhone 12 Series or Later
To activate wireless charging, press the power button or place your device on the charger as illustrated below and it will be held in place magnetically.
The fold-out stand can be unfolded and used as a stand during wireless charging.
Charging Your Device Wirelessly and Recharging Your Portable Charger
Simultaneously
Status | Wireless Charging Indicator | Battery Level Indicator |
---|---|---|
Wireless charging activated | Flashing white | Showing the current battery level |
Charging | Solid white | Showing the current battery level |
Fully charged | Off | Off |
Recharging Your Portable Charger
Status| Wireless Charging
Indicator
| Battery Level Indicator
---|---|---
Charging| Flashing white| Showing the current battery level
Fully charged| Off| Off
Specifications
Cell Capacity | 5,000 mAh 3.85Vdc/19.25Wh |
---|---|
USB-C Input | 5V 2.4A |
USB-C Output | 5V 2.4A |
Wireless Output | 5W / 7.5W |
Total Output | 12W |
- This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases.
- Do not use an adapter with an output of 5V/1A (5W) or less.
- Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
- High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F.
- Both the protective phone case and the position of your device on the wireless charger will affect the charging speed. The farther it is placed from the center of the wireless charger, the slower the charging speed will be.
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic precautions should always be followed, including the following:
- Store the product in a cool, dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Operating temperature should be between 0°C to 40°C / 32°F to 104°F.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should charge and discharge it once every three months.
- When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
- In normal conditions, the battery performance will decline over several years.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2) Increase the separation
between the equipment and receiver. (3) Connect the equipment into an outlet
on a circuit different from that to which the receiver is connected. (4)
Consult the dealer or an experienced radio / TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Product Name: Anker 622 Magnetic Battery (MagGo)
Model: A1611
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Statement
This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.
RSS-Gen Issue 5 March 2019
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device. This digital
apparatus complies with CAN ICES-003(B)/NMB-003(B).
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1611 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1611 is in
compliance with Radio Equipment Regulations 2017 and The Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is
available at the following internet address: https://www.anker.com
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 20mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt-clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other
relevant provisions of UKCA. All essential radio test suites have been carried
out.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
Customer Service
- support@anker.com
- support.mea@anker.com (For Middle East and Africa Only)
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.