ANKER A2625 Power Port PD 2 User Manual
- June 5, 2024
- Anker
Table of Contents
ANKER A2625 Power Port PD 2
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Attention
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during use of the appliance must not exceed 25°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug or appliance coupler.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, please use only a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation beteen the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA
91764
Telephone: +1 800 988 7973
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Statement
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2625 is in
compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC.
The full text of
the EU declaration of conformity is available at the following internet
address: https://www.anker.com/products
Anker Innovations Limited | Room 1318-19, Hollywood Plaza,
610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205
Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
Anker Innovations Deutschland GmbH | Georg-Muche-
Strasse 3-5, 80807 Munich, Germany
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2625 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Specifications
- Input: 100-240 V ~ 1.5 A 50-60 Hz
- Output:
- USB-C: 5.0V 3.0A 15.0W /
- 9.0V 2.22A 20.0W
- USB-A: 5.0V 2.4A 12.0W Max
- Average active efficiency: 83.91%
- Efficiency at low load (10%): 79.94%
- No-load power consumption :0.07 W
Customer Service
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
- support@anker.com
- support.mea@anker.com
- (For Middle East and Africa Only)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>