EMOS ZT1520E LED Dustproof Luminaire with Emergency Module Instructions
- June 5, 2024
- EMOS
Table of Contents
EMOS ZT1520E LED Dustproof Luminaire with Emergency Module
PRODUCT OVERVIEW
Part No.
|
Input Voltage
|
Power
| Color Tempera- ture (K)| Luminous Flux (lm)| Beam Angle| Lifespan (hour)| Protection Rate| Working Tempera- ture| CRI (Ra)|
Dimensions
---|---|---|---|---|---|---|---|---|---|---
ZT1520E|
220–240 V AC
| 40 W| 4 000 K
(neutral
white)
| 5 300 lm|
120°
|
50 000 h
|
IP66
|
-20 ~ +40 °C
|
80
| 1 220 x 85 x 80 mm
ZT1620E| 56 W| 7 700 lm| 1 520 x 85 x 80 mm
Battery Type| Voltage| Duration| Luminous Flux in Emergency mode| Working
Temperature
---|---|---|---|---
LifePO4| 6.4 V| 3 Hours| 630 lm| 0 ~ +20 °C
LED luminaire is designed for indoor and outdoor use to be mounted on a solid
base.
Ingress Protection IP66 – for outdoor use.
Housing colour: grey
Diffuser colour: milky
Type | Power | Fixing Hole Distance |
---|---|---|
ZT1520E | 40 W | 850 mm |
ZT1620E | 56 W | 1 200 mm |
SETUP INSTRUCTION
- Insert Ø 6 mm expansion pipe in the wall, fix the mounting bracket by M4 screw (see Fig. 2).
- Take off the diffuser with LED board (see Fig. 3).
- Loosen the nut of the cable gland, put the cable, through the cable gland. Conect the cable on the terminal block and tighten the cable gland (see Fig. 4).
- Connect terminal block with LED board (see Fig. 5).
- Close the diffuser (see Fig. 6).
- Fix gear tray with the housing (see Fig. 7).
- Turn on the switch (see Fig. 8).
- The luminaire is fitted with a button for manual testing of the emergency module’s functioning.
- If the luminaire’s or the battery’s rated service life has expired, it must be replaced.
WARNING
- Luminaire is suitable entirely for fixed mounting.
- The luminaire can be connected only to the electric distribution network, whose installation and protection complies with the applicable standards.
- Before any manipulation or servicing of the luminaire disconnect the luminaire from AC power. This operation can be carried out only by an authorized person.
- The protection from dangerous contact voltage is ensured by „earthing“.
- In case of any damage to any part of the luminaire, don’t use it.
- LED chips inside the luminaire are not replaceable.
- Don’t change inner wiring of the luminaire.
- In case of broken cover don’t use the luminaire and replace broken cover with new one immediately.
DISPOSAL
Do not throw electric appliances into unsorted municipal waste, use collection points of sorted waste! Dangerous substances from electric appliances deposited in landfills can leak into underground waters, reach the foodchain and damage your health and well-being. For actual information about collection points, contact the local authorities.
The Declaration of Conformity
EMOS spol. s r.o. declares that the LED Dustproof Luminaire is in compliance with the essential requirements and other relevant provisions of Directive. The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>