gemini GCIGMUM200 GMU Series Wireless Microphone System User Manual

Gemini GCIGMUM200 GMU Series Wireless Microphone System

Introduction

Thank you for choosing our GMU series, a UHF Wireless System built for low noise, high sound quality, and long transmission distance. With proper care & maintenance, your unit will provide years of reliable, uninterrupted service. The GMU Series is backed by a 1year limited warranty'”.

Preparing for First Use
Please ensure that you find these accessories included with your GMU Series Wireless System:

GT-100

• R10 Receiver
• GT10 Transmitter
• USB Charging Cable
• User Manual

HSL-100

• R10 Receiver
• BT10 Transmitter
• HS10 Headset Microphone
• LAV10 Lavalier Microphone
  • AA Batteries
  • USB Charging Cable
  • User Manual

M-100

• R10 Receiver
• MT10 Handheld Microphone
• USB Charging Cable
• 18650 Lithium Battery
• User Manual

M-200

• R20 Receiver
  • MT10 Handheld Microphone
  • USB Charging Cable
• 18650 Lithium Batteries
• User Manual

CAUTION

1. All operating instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the Unit other than to change the batteries. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified Gemini service technician. Do not attempt to return this equipment to your dealer.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.
5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.
6. Do not expose to water or heat.
7. Do not use cleaning products or lubricants on the controls or switches.
8. Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire,or other hazards.

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

• READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated.
• RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. All the safety and operating instructions should be read before the product is operated.
• HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to.
• FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
• CLEANING: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet.
• WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
• DO NOT OPEN: Do not open the device or attempt to disassemble the internal parts or modify them in any way. The device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified GEMINI service personnel.
• REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards
• CONNECTIONS: Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.

Product Information Specification:

• Wireless Range: >50M
• Distortion: <0 .6%
• Dynamic range: >106dB
• Frequency Range: R512-541. 7 R3 863- 865
• Frequency Response:20Hz-18KHz, +1dB/-3dB

Receiver (R10/R20)

1. Signal out, conne ct to amplifier or pedal etc
2. 280’rotating head
3. USB port for charg ing
4. Power Indicator LED
5. Frequency Indicator LED
6. Power button

When the Power Indicator LED is lit RED, the transmitter is starting up. When charging Power Indicator LED will be lit WHITE. Frequency Indicator LED is always lit GREEN, indicating the success of frequency.

Guitar Transmitter (GT10)

1. Signal in, connect to your
   electronic instruments, such as electron guitar and bass

2. 280’rotating head

3. USB port for charging

4. Power Indicator LED

5. Frequency Indicator LED

6. Power button

7. Set Button

Handheld Microphone (MT10)

Bodypack (BT10)

OPERATION INSTRUCTIONS:

Turn on the power supply of the receiver and transmitter respectively, the device will connect automatically, RF indicator LED will be lit, White.

Changing the Frequency
Turn on the transmitter, then short press the “SET” button to change frequency, the Receiver will automatically be matched.

Method of Re-Pairing

1. First, power on the receivers you plan to transmit to
2. On the Transmitter, Press and hold the SET button and POWER button at the same time until the battery LED begins to flash.
3. RF indicator LED will light up on the receivers to show a successful connection.
4. Now the transmitter is connected to the instrument, and the receiver is connected to the speaker.
5. After successfully pairing once, it will be automatically matched on future startups.

Our Wireless System Can Support:
6 pairs of devices working without interference.
Transmitting one signal to several receivers at the same time.

1. First, power on all the receivers you plan to transmit to
2. On the Transmitter, Press and hold the SET button and POWER button at the same time until the battery LED begins to flash.
3. RF indicator LED will light up on the receivers to show a successful connection.

TROUBLESHOOTING

On the single-channel systems, transmitters will transmit to the “CH A=A Frequency group” by default. If you are having trouble connecting to your Receiver, the Transmitter’s assignment may have been changed to “CH B=B Frequency group”.
To change back to “CH A”:

1. GPU-G100 GMU-M100
   first, be sure all Receivers are off. With the transmitter powered off, hold down the power button for 9 seconds or when the LED display the Group are conversion, the unit will turn on and change group assignments. Now power on the Receiver you intend to use and the connection should happen automatically. If not, try “Method of Re-Pairing” one time.

2. GMU-HSL-100
   First, be sure all Receivers are off. Then turn on the Transmitter power, hold down the “SET” button for 9 seconds, and the LED display will change from “CHA” to “CHB”, to show the successful change of group assignments. Now power on the Receiver you intend to use and the connection should happen automatically. If not, try “Method of Re-Pairing” one time.

The Dual-channel system GMU-M200, Transmitters will transmit one to “CH A” and one to
“CH B” by default, when you turn on transmit of the Handheld, the LED of the handheld will display which group is it . If both Transmitters are assigned to the same group, you’ll need to change one to another Group: First, make sure all Receivers are off. With the Transmitter powered off, hold down the power button for 9 seconds, unit will turn on and change group assignments.

Power Supply
The USB to USB-C cable is for charging. Please use this to connect to a USB charging port or a qualified power adapter. While charging, please make sure that device is shut down to avoid the loss of electricity during charging. This can lead to longer charging time and shorter battery life.

WARRANTY & REPAIR

All Gemini products are designed and manufactured to the highest standards in the industry. With proper care and maintenance, your product will provide years of reliable service. Please be advised that product warranties are only valid in the country of purchase.

LIMITED WARRANTY

• Gemini warrants its products to be free from defects in materials and workmanship for One (1) year from the original purchase date. Exceptions: Laser assemblies on CD Players, cartridges, batteries, and crossfaders are covered for 90 days.
• This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance or any repairs other than those provided by an authorized Gemini Service Center.
• There are no obligations of liability on the part of Gemini for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, profit, or costs of removal, installation, or reinstallation. All implied warranties for Gemini, including implied warranties for fitness, are limited in duration to One (1) year from the original date of purchase unless otherwise mandated by local statutes.

RETURN/REPAIR

• In the U.S.A., please call our helpful Customer Service Representatives at (732)346-0061, and they will be happy to give you a Return Authorization Number (RA#) and the address of an authorized service center closest to you.
• After receiving an RA#, include a copy of the original sales receipt, with the defective product and a description of the defect. Send by insured freight to Gemini, and use the address provided by your customer service representative. Your RA# must be written on the outside of the package, or processing will be delayed indefinitely!
• Service covered under warranty will be paid for by Gemini and returned to you. For non-warrantied products, Gemini will repair your unit after payment is received. Repair charges do not include return freight. Freight charges will be added to the repair charges.
• On warranty service, you pay for shipping to Gemini, we pay for return shipping within the continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will be charged for freight.
• Please allow 2-4 weeks for the return of your product. Under normal circumstances, your product will spend no more than 10 working days at Gemini. We are not responsible for shipping times.

LEGALITY & SAFETY
The device is not intended for use by people (including children) with reduced physical, sensory or mental capacity. People who have not read the manual, unless they have received an explanation by someone responsible for their safety, should not use this unit. Children should be monitored to ensure that they do not play with the device. The device should always be readily accessible. The device should not be exposed to water. No objects filled with liquids, such as vases, shall be placed on the device. Always leave a minimum distance of 10 cm around the unit to ensure sufficient ventilation. Open flame sources, such as candles, should not be placed on top of the device. The device is intended for use only in a temperate climate. At full volume, prolonged listening may damage your hearing and cause temporary or permanent deafness.hearing drone, tinnitus, or hyperacusis. Listening at high volume is not recommended. One hour per day is not recommended either. Switch the device off where the use of the device is not allowed or where there is a risk of causing interference or danger – for examples: on an aircraft, or near medical equipment, fuel, chemicals, or blasting sites. Check the current laws and regulations regarding the use of this device in the areas where you drive. Do not handle the device when driving. Concentrate fully on driving. All wireless devices are susceptible to interference which may affect their performance. All our devices conform to international/national standards and regulations, and we aim to limit user exposure to electromagnetic fields. These standards and regulations were adopted after the completion of extensive scientific research. This research established no link between the use of the mobile headset and any adverse effects on health if the device is used in accordance with standard practices. Only qualified people are authorized to install or repair this product. Only use batteries, chargers, and other accessories which are compatible with this equipment. Do not connect incompatible products. This equipment is not waterproof. Keep it dry. Keep your device in a safe place, out of the reach of young children. The device contains small parts which may present a choking hazard to kids.

DECLARATION OF CONFORMITY

Safety and EMC Compliance Specifications

• EN 550322:2015 Electromagnetic compatibility for multimedia devices: Radiation requirements
• EN 550355:2017 Electromagnetic compatibility of multimedia devices: Anti­interference requirements
• EN 61000-4-2:2009 Electrostatic discharge reactance (Ambient E2- standard B, 4 kV contact, 8 kV air discharge)
• EN 61000-4-3:2006+A1:2008+A2:2010 Radio-frequency ELECTROMAGNETIC interference (AMBIENT E2, standard A)
• EN 61000-4-4:2012 Electrical rapid transient/burst immunity (standard B) EN 61000-4-5:2014+A1:2017 Surge immunity (standard B)
• EN 61000-4-6:2014 Immunity from conductive disturbance caused by radiofrequency fields (Standard A)
• EN 61000-4-11:2004+A1:2017 Voltage sags, short breaks, and voltage variations
• EN 62368-1:2014+A11:2017 Audio and video, information technology, and communications technology equipment: Security requirements

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply .with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.
• Consult the dealer or an experienced radio/TV technician for help.
• GMU-G100, GMU-HSL100, GMU-M100, GMU-M200 (FCC ID: 2AWTN-LY825)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>