bionik BNK-9084 Gaming Accessories Pro Kit User Guide

: June 5, 2024
: bionik

Table of Contents

CHARGE BASE INSTRUCTIONS
USING CLR-50
CARE AND MAINTENANCE
FCC INFORMATION
WARRANTY
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

**bionik BNK-9084 Gaming Accessories Pro Kit User Guide

**

Thank you for purchasing this bionik™ gaming product.
Our goal is to deliver high-quality, innovative accessories that amplify your gaming experience. Please review this guide and store it for future reference. Otherwise, please recycle. User guides can also be downloaded from our website at www.bionikgaming.com.

CHARGE BASE INSTRUCTIONS

Gently uncoil the USB cable from the bottom of the dock.
You can adjust the cable length by how much of the cable you uncoil. Insert the cable into the cable slot (FIG 1).
Connect the USB cable to an available port on your console or another USB power supply with an output of 5V 1A.
Remember that your console’s USB ports may not be active when off or in standby mode. If you wish your controllers to charge even when the console is off or in stand by then you will need to adjust the power settings of your console. Please follow your console instruction manual to activate the power to the USB ports
Remove the battery covers and any battery cells from your controllers (FIG. 2)
Insert one of the included rechargeable battery packs into the battery compartment, making sure that the “THIS SIDE UP” label on the battery pack is facing the top of the controller (FIG. 3).
Replace the battery cover with one of the included battery covers (FIG. 4).
Align the dock’s connector to the charge port on the top of the controller and gently connect the controller to the Charge Base (FIG. 5). No force is required, and the controller should engage with the dock with minimal effort. A back-lit icon depicting a controller will appear on the Charge Base screen to indicate that the controller is charging. While charging, the icon will remain on (FIG. 6). Once the controller is fully charged, the corresponding icon will turn off to indicate that the controller is fully charged
You can store the Charge Base when not in use. Gently wrap the USB cable on the built-in spool on the bottom of the base and secure the USB connector (FIG. 1)

USING CLR-50

NOTE: Headset may be used with all devices that support 3.5mm headphone jack and is not exclusive to gaming console use. USB power is only required for the RGB LED light feature. The headset may be used without utilizing this feature, and by plugging in the 3.5mm jack for sound.

Plug the headphone jack from the headset into the port on your controller. Adjust the volume wheel on the in-line control box to set your desired level. The mute setting can also be set on the in-line control box.
If you wish to utilize the RGB LED feature, plug the USB connector from the headset into an available USB power source. If needed, you can use the included USB extension cable to reach the ports on your console (FIG. 7).
This headset features a built-in microphone. Please make sure that the headset is worn correctly according to the R and L indicators so that the mic faces the user.
Follow your console’s instructions regarding the use of chat features, and proper procedures for using a headset. Check your console’s options for further settings and features available.

CARE AND MAINTENANCE

Keep away from fire and high temperatures. Never dispose of in fire. Always recycle all electronics and batteries.
Clean with dry a cloth.
Avoid knots in the cable, and store cable neatly using the attached cable wrap
Discontinue use if you suspect there is a malfunction. Please contact our customer service for help and additional info. We are always happy to help and stand fully behind our
products.

FCC INFORMATION

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation..

WARRANTY

All products come with a limited warranty and have been subjected to a thorough series of tests to ensure the highest level of dependability. If you run into any issues, visit www.bionikgaming.com/pages/support for more information.

REGISTER
www.bionikgaming.com/product-registration

SUPPORT
support@bionikgaming.com

844-424-6645