bionik BNK-9067 Power Stand User Guide

bionik BNK-9067 Power Stand

Thank you for purchasing this bionik”‘ gaming product. Our goal is to deliver high-quality, innovative accessories that amplify your gaming experience. Please review this guide and store it for future reference. Otherwise, please recycle. User guides can also be downloaded from our website at www.bionikgaming.com.

INSTALLATION

1. Remove all contents from box.
2. Gently connect the base to the dock by aligning the top tab located at the front of the dock to the recessed notch of the base (FIG. 1).
3. Rotate the base downward and carefully push the base into the two tabs located on each side of the dock until the base snaps into place (FIG. 2). Do not use force, if tab and recessed notch are properly aligned, base should lock into place easily.
4. Plug the included power adapter into wall outlet and thread cable through outing tab (on the base) and attach the other end of the cable into the Micro-USB port on bottom of the dock (FIG. 3).

CONNECTING DUALSENSE™ CONTROLLERS

1. The Power Stand™ is designed to allow for up to two DualSense™ controllers to charge simultaneously.
2. Align the bottom charge port of your controller to either of the two charging docks on the Power Stand™ and gently press down until engaged and properly seated into the dock (FIG. 4).
3. No force is required and the controller should engage with the dock with minimal effort.
4. An LED charge indicator on the front of dock and drop lighting will appear while the controller is charging, turning off once fully charged.

REMOVING DUALSENSE™ CONTROLLERS

Once your controller is fully charged, hold the base of the Power Stand™ and lift the controller out of dock. The controller should release easily and be ready to use.

CARE AND MAINTENANCE

1. Keep away from fire, liquids and high temperatures and always recycle electronics.
2. Keep dock clear of debris and dust by cleaning with a dry cloth.
3. Take care of the cable by avoiding tangles and knots. Avoid sharp surfaces that can damage or fray the cable. If cable shows signs of damage, discontinue use.
4. Never force controllers into the Power Stand™. Controllers should connect with ease. If you experience difficulties, confirm the controller is properly installed on the dock.
5. Discontinue use if the Power Stand™ is damaged or you suspect there is a malfunction. Please contact customer support for help or additional info.
   WARRANTY: All products come with a limited warranty and have been subjected to a thorough series of tests to ensure the highest level of dependability. If you run into any issues, visit www.bionikgaming.com/pages/support for more information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>