PQ Lighting LED Slim Cutoff Wall Pack Instruction Manual

June 5, 2024
PQ Lighting

LED SLIM CUTOFF WALL PACK
INSTALL INSTRUCTIONS

PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION.
Please read the instructions before you install and use the luminaire.

  • To prevent personal injury or product damage only licensed electricians should install.
  • To avoid electric shock or component damage disconnect power before attempting installation or servicing.
  • This product must be installed in accordance with the national electric code (NEC) and all applicable federal, state and local electric codes and safety standards.
  • Disconnect product and allow cooling prior to servicing.
  • Any alteration or modification of this product is expressly forbidden as it may cause serious personal injury, death, property damage and/or product malfunction.
  • To prevent product malfunction and/or electrical shock this product must be properly grounded.
  • Wall mount only.
  • Not suitable for mounting within 4 ft (1.2 m) of the ground.
  • Suitable for wet locations.

  WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.

MOUNTING

  1. Loosen the screw on the side and open the fixture, attach to the wall using the installation holes, (Fig 1)
  2. Close the fixture and lock the screw.

WIRING

  1. Complete the wiring to the power source and ground. (Fig 2)

Fig.2 – GENERAL WIRING DIAGRAM

Universal voltage driver permits operation at 100V to 277VAC, 50 or 60Hz except fixtures factory ordered with a 120V photocell.

  1. Connect the black fixture line to the (L) Live line supply wire.
  2. Connect the white fixture line to the (N) Neutral line supply wire,
  3. Connect the green fixture line to the (G) Ground line supply ground.

CLEANING AND MAINTENANCE

CAUTION: Be sure fixture temperature is cool enough to touch. Do not clean or maintain while fixture is powered on.

  1. Clean lens and fixture with non-abrasive glass cleaning solution.
  2. Do not touch or open fixture to clean the LED.

TROUBLESHOOTING

  1. Check that the line voltage at fixture is correct. Refer to wiring directions.
  2. Make sure fixture is grounded properly.

Specifications subject to change without notice. Photos and line drawings may not be to scale and are for general reference only.

PREMIUM QUALITY LIGHTING? – www.PQLighting.com
© P.QLL., Inc.
– 2285 Ward Avenue
– Simi Valley, CA 93065
800-323-8107

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals