ThermoPro TP910 Bluetooth Cooking Thermometer User Guide
- June 5, 2024
- ThermoPro
Table of Contents
ThermoPro TP910 Bluetooth Cooking Thermometer
Introduction
Congratulations on your purchase of a Smart, Wireless Bluetooth-connected Cooking Thermometer. You will now be able to remotely monitor the temperature of food and how much time is left for the food to be done from your smartphone.
Features
- Temperature range of probe: 15.8° F to 572° F (-10° C to 300° C).
- Temperature probe accuracy: ±1.8° F(±1.0° C).
- Power source: Built-in lithium rechargeable battery.
- Display the temperature of 2 probes.
- 2.4GHZ wireless Bluetooth function. Connect to the mobile app via the Bluetooth module.
- Q Backlight Button: Touch to turn on/off the backlight.
- © / * /° C/° F: Press once to turn on/off the unit. The thermometer transmitter will enter pairing status once powered on. Press and hold for 3 seconds to switch temp unit between ° F and ° C.
- cc.. 1> J Button: Press once to turn on the alarm function. Press and hold for 3 seconds to turn off the alarm function. This button only applies to thermometer mode.
- Wire Stand: Allows you to stand the device on the table. It can also be inverted and used as a hanger.
Components
- 1 x Transmitter
- 1 x USB Charging Cable
- 1 x Manual
- 1 x BBQ Clip
- 2 x Stainless Steel Probes
- 2 x Plastic Probe Winders
Usage
Follow the simple steps below to set up your ThermoPro Bluetooth Cooking Thermometer and help you cook like a pro!
- Step 1: Download and install the “ThermoPro BBQ”App. Scan the QR code above, or search for “ThermoPro BBQ” in Apple Store on IDS devices or in Google Play Store on Android devices. Download the App and install it on your smartphone
- iPhone and iPad apps for IDS 9.0 and above.
- Android app for versions 4.4 and above.
- Android users need to allow all the requests about this app from the Android system.
- Step 2: Enable Bluetooth on your smartphone in the smartphone settings section. If your smartphone has Bluetooth enabled, you can skip this step.
- Step 3: Fully charge the ThermoPro Bluetooth Cooking Thermometer by connecting the USB charging cable provided to any USB charger.
- Step 4: Insert the provided temperature probes into the thermometer transmitter. Insert the 2 probes into the sockets.
- Step 5: Turn on the thermometer transmitter by pressing the© button once on the back of the transmitter. The Bluetooth icon * will be flashing at the top of the transmitter display.
- Step 6: Launch ThermoPro BBQ APP and press Start Pairing. Wait a moment while the thermometer pairs to your smart phone. Once pairing is complete, the Bluetooth icon* on the thermometer transmitter display will stop flashing. Then press Done in the APP and the APP will jump to the Cooking page which shows temperatures measured by the two probes. Done! Your Thermo Pro Bluetooth Cooking Thermometer is ready for use! Any questions or need more help with setup, please feel free to contact us.
Declaration of Conformity
Hereby, the manufacturer declares that this product complies with the basic
requirements and applicable regulations of the Radio Equipment Directive
2014/53/EU, and the EMC Directive 2014/30/EU. The complete declaration of
conformity can be found at:
https://itronicsmalI.com/eu-declaration-of-conformity /
Disposal of the Electronic Appliance
This electronic appliance should not be disposed of with normal household waste. Dispose of the unit at an approved facility or at your local recycling center. Please observe the current rules and regulations when disposing of the appliance. Contact your local council if in doubt.
Customer Service
Call or Text: 1-877-515-7797 (USA &
Canada only)
Email: service@buythermopro.com
Hours: Weekdays 8:00 AM- 8:00 PM EST (USA & Canada only)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>