LightCould LED A19 Bulb with Tunable RGB Instruction Manual

LightCould LED A19 Bulb with Tunable RGB

Hello

Lightcloud Blue is a wireless lighting control system that allows you to control RAB Lighting’s various compatible devices with your mobile device. ightcloud Blue lamps are wirelessly controled locally ia the Lightdoud Blue pp. Get even more features like secure remote control capability from anywhere that has an internet connection. Light cloud Gateway and Bridge  devices are required to access premium feat ures

Product Features &Specifications

• Direct Connect LED, No Gateway ar Hub required tirelessly control from your mobile device
• On, off and dimming Color tuning
• Wireless remote control
• Create custom scenes
• Lived-in look vacation mode
• Sensor compatible
• Schedules and automation
• SmartShitt automated circadian schedule

Safety Information

• Not suitable for use with dimmers and sensors unless specifically designed for RAB Lightcloud Blue Lamps
• Risk of electric shock
• Do not use where directly exposed to water.
• Not intended for use with mergency exit foxtures or emergency lights.
• Only install in operating environments between 4°F and 104°F (-20°C to 40°C)
• Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard Gincandescent) dimmer or dimming control.

Installing your Lightcloud Blue Lamp

1. Pre-Installation

2. Turn off power
   Place the wall switch in the aff positon
   Turn off the main power at the breaker panel or remove the fuse from the fuse box

3. Find a suitable location
   Use these guidelines when installing devices if there s a clear line of sight between a Lightcloud Blue Smart RGB A19 and another Lightcloud Blue device they can be placed up to 200 feet apart

   • Fa Lighocloud Blue Smart RGB A19 and another Lightcioud Blue device are separated by ordinary drywall construction, try to keep them within 70 ft. of each other.
   • Brick, concrete and steel construction may require additional
   • Light cloud Blue devices to go around the abstraction

Installing your Lightcloud Blue Lamp

Connect the device to power.
After installed, turn the power on and the lamp will enter pairing mode automatically fit has not already been paired. Once the lamp has been paired, it wil indicate by flashing on and off 5 times, and  hen  im to 3096 brightness

Controlling your Lightcloud Blue Device

1. Confirm your device is connected and powered on
2. Download the Lightcloud app from the Apple App Store or Google Play store
3. Launch the App and create an account
4. Tap the “add device’ icon in the app to start connecting devices
5. Follow the remaining steps in the app. Create areas. groups and scenes to organize and control your devices
6. You’re all set

Setting Device to Pairing Mode

if your Lightcloud Blue Smart RGB A19 s already paired, you can reset it by using the below methods

Method 1:Manual 1-10 devices
Power the lamp off and an S times
consecutively. Do not allow more than 2second to elapse between switching The lamp will flash 3 times, then reset to 1006 brightness at default CCT

Method 2: Reset Tool 10cr mare devices
The reset process must be done by prafessional electricians qualified by RAB Reach out to your RAB sales manager to request Reset Tool. The tool simply needs to be belaced directly on the lamp for 2  seconds The lamp will flash 3 times, then reset to 100% brightness at default CCT.

Functionality

Configuration
All configuration of Lightckoud Blue products may be performed using the Lightcloud Blue app.

FCC Information

This device complies with Part 15 of the FCC Rules Operation is subject to iterieenge T e received, including interference that may cause undesired operation To comply with the FOCsRF exposure limits for the general population uncontrolled exposure, this transmitter must be installed to provide a separation distance of at least 20 cm from al persons and must not be co- located or operating in conjunction with any other antenna o transmitter. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment Such modifications could void the user’s authority to operate the equipment.
CAUTION: Changes or modifications to this equipment not expressly approved by RAB Lighting may void the user’s authority to operate this equipment
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause parental interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful intolerance to radio or television reception which can be determined by turning the equipment off and08, the user is encouraged to try to correct the interference by  one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>