FRECAN PLASMA F800 Recirculation Filter Instruction Manual
- June 13, 2024
- FRECAN
Table of Contents
FRECAN PLASMA F800 Recirculation Filter
Product Information
- Product Name: PLASMA F800
- Power Supply: 210 – 250 VAC 50Hz, 10W
- Ref. Numbers: 90376, 90346, 90340, 90348, 90375, 90337
Product Usage Instructions
Socket Mounting:
- Prior to installation, remove the drawers from the cabinet for easy access.
- Disconnect the hob and hood as a precaution.
- Take the necessary measurements to calculate the route and additional lines required.
- Mount the entire system outside of the cabinet for convenience.
Put the System in Place Inside the Cabinet:
- Connect the system to the hood accordingly. Connect the hob, hood, and filter to power. Assemble the plinth by fixing the rack drawer, put the rack by its magnets and mount the drawers.
- Connect the system to all its components. Collect the piano cottura, the cap and the food filter. Assemble the zoccolo from the cassetto to the cream, put the cream on the magnet and mount the cassetti.
Ceiling Mounting:
- Prior to installation, create appropriate inserts according to the type of installation.
- Leave a register on the ceiling to access the filter and avoid disassembling the hood in case of failure.
- Take the necessary measurements to calculate the route and additional lines required.
- Mount the entire system outside for convenience.
(IT) Put the system in position with all power supply. Show the connection between the filter system when the engine starts and connects it.
DIMENSION
Socket mounting
- Prior to installation, remove the drawers from the cabinet for easy access. Disconnect the hob and hood as a precaution. Take the neces-sary measurements to calculate the route and the additional lines required. Mount the entire system outside of the cabinet for convenience.
- Put the system in place inside the cabinet and connect it to the hood accordingly. Connect the hob, hood, and filter to power. Assemble the plinth by fixing the rack drawer, put the rack by its magnets and mount the drawers.
Ceiling mounting
- Prior to installation, you must create the appropriate inserts according to the type of installation. It is necessary to leave a register on the ceiling to access the filter and avoid having to disassemble the hood in case of failure of this. Take the necessary measurements to calculate the route and the addi-tional lines required. Mount the entire system outside for convenience.
- Put the system in place by connecting it to power. Fit the hood by connecting the filter system to the motor outlet and connect it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>