SILVA 37981 5XT Trail Speed Instruction Manual
- June 5, 2024
- SILVA
Table of Contents
FULL VERSION MANUAL
TRAIL SPEED 5XT
**Art. no 37981
**
PRODUCT OVERVIEW
The Trail Speed 5XT packaging contains the following parts:
- Lamp unit
- Headband
- Headband (top)
- Extension cord with helmet strap
- Cable guide (side)
- Cable guide (rear) with 3M adhesive
- Rechargeable Li-Ion battery 7.0 Ah
- USB-C charge cable
- Helmet bracket with 3M adhesive
- Bar mount
- Battery holder (7.0)
- Battery attachment (Velcro)
- Quick guide
BEFORE USE
BATTERY CHARGING
The battery needs to be charged before first use.
- Located on the side of the battery pack is a USB-C connector. Attach the included USB charge cable to this USB-C connector.
- Connect the USB connection to a wall outlet, computer or another standard USB connector.
- On the battery, there are 5 LEDs showing battery status during charging:
- Greenlight (all 5 LEDs) = battery is fully charged
- Red light blinking = battery is charging
The charge time is approximately 8 hours.
Note! When the battery is fully charged the charger automatically
switches to maintenance mode.
Note! Never leave a battery unattended during charging.
Trail Speed 5XT is compatible with all Silva batteries with the same connector
as on Trail Speed 5XT battery.
Note that the battery indicator may not be accurate with other Silva
batteries and that the battery won’t fit the battery holder.
SILVA TRAIL SPEED 5XT THE FLEXIBLE, MODULAR HEADLAMP
Trail Speed 5XT is designed for Multi-activity Sports. Here is a description
of the different options:
ADJUST THE HEADBAND
The headband is ergonomically shaped to give a comfortable fit. Use the 2
buckle adjustments to fit it perfectly to your head. The detachable top band
is included. Attach the headlamp in the head bracket by sliding the headlamp
foot into the snap-in socket. To remove, slide the headlamp up and out of the
bracket.
BATTERY CARRYING
The battery pack can be carried in multiple ways; for example on the headband
by using the battery holder, in a pocket, backpack, or on the waist by using
the extension cable and cable guide (rear), or mounted on the bike frame by
using the Velcro strap.
The ergonomic battery holder keeps the battery in place and improves comfort
when you carry the battery on your head. You attach the battery holder to the
headband and then easily slide in the battery.
MODULAR SYSTEM
In order to move the headlamp body from the headband to either the helmet
bracket or the bar mount, gently push the lamp upward relative to the head
plate with headband. Insert the headlamp body in the new bracket and gently
press it down until you hear a click sound.
BIKE HANDLEBAR ATTACHMENT
The bar mount is developed for use on bike handlebars with a dimension
between 22 mm and 32 mm. The bar mount is attached to the handlebar by
wrapping the rubber strap around the handlebar and fastening it on the plastic
hook. Attach the headlamp in the bar mount by sliding the headlamp bracket
into the snap-in socket.
To remove, slide the headlamp up and out of the bracket.
HELMET ATTACHMENT
The helmet bracket + rear cable guide comes with pre-mounted adhesive tape on
the back for easy mounting on any helmet. The adhesive is a polyethylene foam
tape developed to not damage or cause any type of weakness to the plastic in
your helmet.
To mount the helmet bracket, remove the protective film covering the adhesive
tape. Make sure the surface of the helmet is clean and dry. Press the bracket
onto its correct position. If you do not want to use the adhesive on your
helmet the attachment is prepared for mounting with 2 or more straps on the
sides. (Not included)
Attach the headlamp in the helmet bracket by sliding the headlamp bracket into
the snap-in socket. To remove, slide the headlamp up and out of the bracket.
Attach the cable by using the back cable guide or integrated helmet strap.
Depending on helmet type, it might be preferable to use the Helmet mode Flow
light deactivated, when the headlamp is used on a helmet. The headband is
designed to fit on a helmet by detaching the battery holder thus giving you
the flexibility to use either the included helmet bracket or to just snap the
headlamp onto your helmet and go.
DURING USE
SILVA INTELLIGENT LIGHT AND FLOW LIGHT
SILVA Intelligent Light optimizes the light pattern by the unique
combination of a long reach spot light and a close floodlight. With fewer head
movements and a clear view of near as well as far obstacles, you gain the
balance and confidence it takes to move fast and perform better. Our ingenious
SILVA Flow Light takes the optimization even further by providing seamless
tuning of the light pattern for your favorite sport. Simply tilting the light
downwards makes the beams wider to brighten up slower activities. When tilting
the headlamp upwards, the light reaches longer to provide perfect vision when
you move fast.
SWITCH ON YOUR HEADLAMP
A push-button is located on the left side of the headlamp body. This button
controls all light modes.
- To start the headlamp with Flow Light-activated press the push button with a short press.
- To start the headlamp with Flow Light deactivated press and hold the push-button for 1the second
- To cycle between the different modes use short presses.
- To turn the headlamp off press and hold the button for 1 second
DEACTIVATED FLOW LIGHT
Flow Light deactivated means that the Light image will remain unchanged even
if the headlamp is tilted up or down. This might be useful when the lamp is
mounted on a helmet or a bike handlebar.
TEMPERATURE CONTROL
This headlamp might get hot. The headlamp temperature is depending on light
mode, ambient air temperature, and airflow (speed). Make sure to keep it away
from children. Also, make sure it will not get in contact with sensitive or
flammable material.
NOTE: Always make sure to disconnect the battery when the lamp is not is
use.
Why does the light dim down for no apparent reason? If the cooling is not
sufficient, for instance, if used while standing still, indoors, or in high
temperatures, then the light will automatically be reduced until the
acceptable surface temperature on the lamp body is reached. This means that
the lower the ambient temperature, the stronger the light output.
LOW BATTERY WARNING
During the operation of the headlamp, there will be a low battery warning when
10% of the battery energy remains. This is done by flashing both LEDs for 1
second.
RESERVE MODE
During operation, the lamp will go into reserve mode when there is 10% power
left of the battery. All LEDs will flash before the lamp goes into this mode.
Reserve mode can be overridden by pressing the button.
Warning: If you have pressed the button when the headlamp is in reserve
mode no more low battery warnings will appear before the headlamp turns OFF.
BATTERY STATUS INDICATION
When the battery is connected and the headlamp is switched on – the current
battery status will automatically be visible for 30 seconds. To check battery
status during use, the headlamp has to be switched OFF and then back ON again.
- 5 green LEDs = Fully charged
- 4 green LEDs = 80% of the battery remains
- 3 green LEDs = 60% of the battery remains
- 2 green LEDs = 40% of the battery remains
- 1 red LED = 20% of the battery remains
AFTER USE
MAINTENANCE
To make sure you get maximum performance from your headlamp, clean it regularly with a damp cloth. Headband cleaning rinse in warm water.
TECHNICAL SPECIFICATIONS:
Weight headlamp including headset:
Battery weight:
Battery type:
Reserve mode:
Charging time:
Water resistance:
Operative temperature range:| 86 g
235 g
Li-ion 7.4 V, 7.0 Ah
0.5 h
8 h
IPX5
-20 – +60º
---|---
ABOUT LI-ION BATTERIES
- The battery should be stored in a dry environment within the temperature range of -20°C and +35°C.
- If you would like to store your battery for a longer period (more than 30 days) the battery should not be fully charged. This may cause a loss of its characteristics.
- Li-ion batteries have a discharge rate of approx. 20% over a 30-day period. You can always charge a half-full battery without damaging its characteristics.
- Do not expose the battery to extreme temperatures which may cause fire or explosion.
- Do not disassemble or mistreat the battery; risk of a chemical burn.
- Keep away from children.
- Do not dispose of batteries in a fire. This may cause an explosion.
- Do not submerge the batteries in water.
- Do not short circuit the contacts.
- Replace only with Silva batteries with the same connector as on Trail Speed 5XT battery.
PROTECTING THE ENVIRONMENT.
Headlamps, batteries, and packaging are recyclable. Please dispose of these
items at designated recycling stations.
WARRANTY
Silva warrants that, for a period of two (2) years*, your Silva Product
will be substantially free of defects in materials and workmanship under
normal use. Silva’s liability under this warranty is limited to repairing or
replacing the product. This limited warranty extends only to the original
purchaser. If the Product proves defective during the Warranty Period, please
contact the original place of purchase. Make sure to have your proof of
purchase on hand when returning the product. Returns cannot be processed
without the original proof of purchase. This warranty does not apply if the
Product has been altered, not been installed, operated, repaired, or
maintained in accordance with instructions supplied by Silva, or has been
subjected to abnormal physical or electrical stress, misuse, negligence, or
accident. Neither does the warranty cover normal wear and tear. Silva is not
responsible for any consequences, direct or indirect, or damage resultant from
the use of this product. In no event, will Silva’s liability exceed the amount
paid by you for the product? Some jurisdictions do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This Warranty is valid and may be processed
only in the country of purchase.
- Batteries: 1 year
For more information please visit www.silvaweden.com
Visit: www. silva/environment for more information about the Waste Electrical and Electronic Equipment (WEEE) Directive.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>