fino F2026 Heart Rate Bracelet Instruction Manual
- June 5, 2024
- fino
Table of Contents
fino F2026 Heart Rate Bracelet
Product Introduction
Bracelet host
- The picture is for reference only, the product drawing shall prevail
Wearing method
- Insert one end of the wristband host into the slot from the back of the wristband
- Press the other end with your thumb to make the whole bracelet body enter the wristband slot and clamp firmly.
- Wear the wristband to a distance about one finger wide from the wrist bone, and adjust the tightness of the wristband to a comfortable
For the heart rate sensor to achieve the best measurement effect, the back of the bracelet needs to contact the skin. Wear the bracelet correctly, neither too tight nor too loose, and let the skin have space to breathe.
The bracelet can be easily moved or sensed on the arm Try to tighten the
wristband a little Please read this instruction carefully before while. Loose
The bracelet should fit comfortably on the wrist.
Suitable
- The exercise heart rate Bracelet needs to be connected to the “fino” app. Scan the QR code below or search for “fino” ness “in the app store to download and install the” fino “app
- Log in to the account in the “fino app” and enter the course from my device, heart rate device of smart device or any course; Long press the dial touch button for 3 seconds to keep the bracelet in the power on state (the heart-shaped indicator light is on), click the connected device under the heart rate sign, select connect “Bluetooth heart rate device”, find the corresponding Bluetooth name (see the back of the bracelet) for pairing, and display that the pairing is successful.
Note:
- please make sure the Bluetooth is on. During connection, keep the bracelet close to the mobile phone the connection mode of the display screen is to open “setting” – “heart rate device” – “connection” corresponding device – successful connection
Connect
After the bracelet is successfully bound, record and analyze your movement
with the course. After startup, the indicator light flashes in light orange.
After wearing it correctly, it stops flashing and enters the heart rate
monitoring mode.
The heart rate color comparison of each section is as follows:
- Gray flashing light: in a power-on state, heart rate collection has not started
- Gray range 100% s warm-up and relaxation area< 60%
- Blue: interval 2 60% s fat burning endurance area<70%
- Green: interval 3 70% s cardiopulmonary enhancement area<80%
- Yellow: interval 4 80% S maximum oxygen uptake increase area<90%
- Red: interval 5 90% s high-intensity breakthrough area. The above data can be viewed through app or screen.
Disassemble
Take off the bracelet, hold both ends of hard to make a small gap between the wristband host of the bracelet and the wristband slot, and push the wristband host of the bracelet out of the front of the wristband with your fingers.
Charging
When the bracelet does not operate, the red breathing light indicates that the
power is too low. Please charge it in time.
Open the waterproof cover of the USB charging port, connect the attached USB
charging cable, connect the other end with a USB charger above 5V / 0.5A or
the USB interface connected to the computer, and start charging immediately.
• when charging, the body flashes red breathing light.
• when the charging is completed, the blue light on the fuselage will be on
for a long time, and the light will go out after removing the power supply.
• unplug the charging cable and replace the USB waterproof cover, and then
replace it in the same way.
Light indication description
- Standby
- no lights
- Turn on heart rate measurement
- Orange – the light is flashing
- The user’s heart rate is being detected
- Green-breathing light
- The user’s heart rate is under stable measurement
- Green-the light is on for a long time
- Fully charged, the charging cable has not been
- removed
- Blue-the light is always on
- Charging
- red-breathing light
- Low battery
- (it will not indicate if the battery is too low)
- Orange- the light is always on
Precautions
This device is waterproof for daily use and is not suitable for sports such as swimming; please avoid direct immersion in water or deformation of the waterproof structure due to high temperature and heat. Keep electronic equipment as dry as possible for extended use. This product and its accessories are not toys, please place them out of the reach of children to avoid danger. Do not plug or unplug the power cord (data cable) with wet hands to avoid contact with liquids. Please make sure the body and charging cable are dry, and do not use it in the bathroom. This product has a built-in rechargeable battery, do not put it into fire or charge, use or leave it in high temperature places. Do not use when the power cord is damaged or the connector fitting is loose. Please make sure the power cord and product are kept dry, do not wash the bracelet with water Before connecting the product for charging, please ensure that the charging voltage of the product meets the charging standard voltage; If the power cord is damaged or lost, please go to fino official website or contact customer service to purchase a matching power cord. Please use and store the product at temperatures between 0°C-40°C.
Basic parameters
- Product Name: fino heart rate bracelet Connection method: Bluetooth 4.0
- Product color: Graphite black
- Net weight: 2/g
- Charging time: about 1 hour
- Product model: F2026
- Battery Specification: 3.7v/105mah
- Battery type: lithium polymer battery support
- System: IOS 9.0 Abovel Android 5.0 Above
- Product size: 243mm (length) 34mm (width) 12mm (height)
- Made in China
- FC FCC ID:2A57Z-F2026
Functional features
-
Personalized customization
After inputting the basic information such as height, weight, age and gender on the app end, the user can provide you with diversified exercise suggestions according to the bracelet monitoring exercise data; You can also set your personal maximum heat rate according to your situation and customize the training plan suitable for you. -
Heart rate monitoring
Resting heart rate monitoring: after the bracelet is connected with the app, the resting heart rate can be measured through the app in the human body lying down state for about 3 minutes. Exercise heart rate monitoring: after the bracelet is connected with app, it analyzes the heart rate value of human movement through app inteligent aigorntnm. -
Data Storage
You can read the movement data with human activity records through app to master personal fitness records; Support data storage of multiple devices at the same time. -
Automatic sleep
When the human body is in a static state, after the heart rate value is measured, it will automatically sleep after no operation for 1 hour, If the heart rate is not measured or the wearer is not worn, it will automatically sleep after 30 seconds. -
Super long endurance
-
In the ultra long endurance sleep state, Bluetooth, 3D sensor, etc. are automatically turned oft. It can be activated by turning on the power or long pressing to start up, so as to prolong the endurance time. Bluetooth transmission 4.0lt supports 10m lon9-distance real-timee transmission, which is efficient and stable.
Troubleshooting
- fault
- phenomenon
- cause analysis
- method of exclusion
- phone/tablet/band
- Bluetooth is not turned on
- turn on Bluetooth
- connection
- the bracelet is not
- turned on
- long-press the touch
- button to turn on
- unsuccessful
- exhausted battery
- charging
- damaged charging cable replace the charging cable
- can’t charge
- damaged charging port
- contact customer service
- The machine is broken
- contact customer service
- improper wearing
- correct wear
- inaccurate
- heart rate
- damaged equipment
- contact customer service
- battery life reached
- contact customer service
- long charging
- time
- circuit failure
- contact customer service
Maintenance
The touch buttons and screen of the bracelet do not support wading operations. When the bracelet is wet, please wipe the surface water with a soft cloth before operating. Avoid wearing the bracelet too tightly in daily use. Please use a paper towel or soft cloth to wipe the main unit of the bracelet, do not use corrosive or abrasive detergents to avoid damage to the product Please keep the contact part of the bracelet dry and clean the wristband with clean water regularly. If symptoms such as redness and swelling occur on the contact area, stop using it immediately and consult a doctor
Product warranty
- This product is manufactured through strict quality management and inspection process.
- Consumers can enjoy free maintenance services on fino official website or contact customer service according to the content of thee warranty card in case of failure during normal use. (Batteries are consumables and are not covered by the warranty. Ihey are provided for a fee)
- The following cases do not enjoy free services:
- Damage caused by repairs and modifications not approved by the Company
- Damage caused by mistake, negligent use or accident
- Damage caused by natural disasters and abnomal voltage
- Damage caused by failure to observe the precautions in this product manual
- Use this warranty card as the warranty certificate.
Product Warranty Card
- Product Name
- Warranty Period
- One year from the
- date of purchase
- Product Model
- Purchase Date
- Customer Name
- TEL
Address
The illustrations of products, accessories, user interface, etc. in the manual are schematic diagrams and are for reference only. Due to the update and upgrade of the product, the actual product diagram may be slightly different, please refer to the actual product.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Company Name: BASE SOLUTION Co., Ltd.
Address: 24F., No. 93, Sec. 1, Xintai 5th Rd., Xizhi Dist., New
Taipei City 221416, Taiwan (R.0.C.)
WEB: www.finofitness.com
E-mail: [email protected]