SEEWiS RS485 4 Inch Smart Switch Pro User Manual
- June 3, 2024
- SEEWiS
Table of Contents
4” Smart Switch Pro
Product Presentation
Exterior view
Product Main Features
- Compatible with Chinese standard wall boxes, simple in wall installation.
- 4-inch HD LCD, IPS, multi touch screen, Dual array microphone with noise reduction, Auto light sensor, built in 1W speaker.
- Android OS 8.1, Quad Core 1.8G, 2G RAM + 8G ROM, Built in WiFi, BLE 4.2, ZigBee 3.0, Ethernet, RS485.
- Smart Home voice control, ZigBee gateway function, APP remote control.
- Control the lights, curtains, air conditioners, and all other Smart Home devices.
- Configure Smart Home scenes in the APP, turn on the scene mode with one touch on the screen or easily voice control.
Specification
| Product | 4″ Smart Switch Pm (ZigBee 3.0) | Barna & |
|---|---|---|
| Body Size | Dimensions(mm) | 86mmx86mmx10mm (without the base) |
| 86mmx86mmx36.6mm (with the base) | ||
| Weight(g) | 2109 | |
| Color | Black glass + Black plastic frame + Black case | |
| Screen | Type | Capacitive TP |
| TP Type | G+F 5 points | |
| LCD | TFT | |
| Size | ||
| Resolution | 480*480 | |
| Multitouch | 5 points | |
| Sound | Speaker | 1 W |
| Music play | Yes | |
| Mic | Dual array microphone | |
| General | Power | AC 100-240V 50/60Hz |
| CPU | PX30 Quad Core Cortex- A35 | |
| OS | Android 8.1 | |
| Memory | 2GB RAM + 8GB ROM | |
| Light Sensor | YES | |
| Proximity Sensor | No | |
| COMMunkattinS | ZigBee | Tuya ZigBee 3.0 |
| RS485 | R5485 | |
| Bluetooth | BLE 4.2 | |
| WW1 | 802.11b/g/n 150Mbps 2.4G | |
| Ports | Power | AC 100-240V 50/60Hz |
| Relay | 2 relays | Load no more than |
200W for each relay
RS485| RS485|
Ethernet port| 10M/ 100M Self-adaptive fast ethernet|
Working conditions| Working temperature| 0 – 40 degrees|
Working humidity| 5% – 90% RH|
Installation instructions
- Turn off the main power in the electricity box and confirm the fire wire is not alive with a test pencil.
- Remove the base of the Smart Switch and install it in the wall box (as shown in the pictures following).
- Check the wires and make sure the wires are in good contact with the terminals and no exposed cooper wires.
- Fasten the base to the wall box with mounting screws and fix the Smart Switch back to the base.
- Note that the screws should not be screwed too tight during installation, in case any deformation or damage to the screen and hardware.
- If the Smart Switch is not flat after installation, do not press the screen violently, please check the wall box and the base installation at first.
- Please note the product does not support POE power supply.
- The product must be installed by professional electricians. The product should be kept away from fire and water during installation and use.
SHENZHEN SEEWIS TECHNOLOGY CO., LTD
WWW.SEEWIS.CN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>