Waneway L12V-004W Vanity Lights for DIY Hollywood Mirror Instruction Manual
- June 16, 2024
- Waneway
Table of Contents
L12V-004W Vanity Lights for DIY Hollywood Mirror
Instruction Manual
L12V-004W Vanity Lights for DIY Hollywood Mirror
-
Open the packaging and take out the item carefully.
-
Determine the locations where the bulbs are to be stuck, clean the surface and mark (As shown in Figure 1 for an example). Please note that the orsta nee between each bulb should not be greater than 40cm.
-
Peel off the films of the double-sided tapes, as shown in Figure 2, and adhere the bulbs onto the surface one by one according to the marks.
Please note:
**** 1) Excessive bulbs can be cut off from the end of the cable, as shown in Figure 4.
2 ) The dimmer switch can also be fixed to the surface with the supplied double-sided adhesive tape. -
Rotate the bulbs to shorten the wires, as shown in Figure 3
-
Connect the light kit with dimmer switch and power adaptor and plug into the outlet socket to test.
-
Gently touch the button to turn on/off; long press the button to dim the light.
Gently touch the button , to shift between white light, warm light and natural light; long press the button , to change the color gradually. -
The installation is complete.
Made in china
Documents / Resources
|
Waneway L12V-004W Vanity Lights for DIY Hollywood
Mirror
[pdf] Instruction Manual
L12V-004W Vanity Lights for DIY Hollywood Mirror, L12V-004W, Vanity Lights for
DIY Hollywood Mirror, DIY Hollywood Mirror, Hollywood Mirror, Mirror
---|---