All Clear ACGL-LB002 Combination Key Safe Lockbox Instruction Manual
- June 6, 2024
- All Clear
Table of Contents
All Clear ACGL-LB002 Combination Key Safe Lockbox
Combination Key Safe Box Instruction
To open the key box
- Slide the shutter board to reveal the dials.
- Rotate dials to the current combination (factory combination is 0-0-0-0).
- Push the button near the dials.
- After the box is opened, to plug in/out the shackle, pull the button 2 inside the box from right side to left, and lose the button 2 after pulling in/outthe shackle, keys can be put in or taken away, shown in Picl (for Item: CH-802 ) Open the box, push the button inside the box to plug out the shackle, shown in Pic2(for Items: CH-866 CH-827 CH-827P CH-847)
- When ready to close upset the dials to protect your combination. Close the shutter.
To set your combination
- Open the key safe box (factory setting is 0-0-0-0).
- Move the RESET button from position’ A’ to position’B’, as shown in Pic 4.
- Turn the dials to the desired combination.
- Move the RESET button from position ‘ B’ back to position ‘ A
- The new combination is now set.
Important notes:
- Keep the shutter board closed for water resistance.
- It is recommended that the dials are rotated weekly to keep them work well.
Introduction
Uninstall the Hook
Take a small flat object, such as a small scissors, insert it into the hole on the side of the hook, and then lightly and slowly lif the hook out. Don’t lift too fast or use too much force to avoid breaking the hook.
Install the Hook
Tilt the hook, place the left end in the mounting hole first, then pinch the
right end of the hook with your thumb,and gently press down and left at the
same time, so that the right end is also locked into the mounting hole, and
you will hear a “click”.
Pay attention to the direction of the hook and avoid installing it backward.
CLASSIC HOT SALE
NEW PASSWORD BOX
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>