AVMATRIX SE1217 H.265/ H.264 HDMI Streaming Encoder User Guide

: June 6, 2024
: AVMATRIX

Table of Contents

USING THE UNIT SAFELY
BRIEF INTRODUCTION
SPECIFICATIONS
OPERATIONS GUIDE
- Network Configuration and Login
- Management Web Page
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AVMATRIX SE1217 H.265/ H.264 HDMI Streaming Encoder User Guide

USING THE UNIT SAFELY

Before using this unit, please read below warning and precautions which provide
important information concerning the proper operation of the unit. Besides, to assure that you have gained a good grasp of every feature of your new unit, read below manual. This manual should be saved and kept on hand for further convenient reference.

Warning and Cautions

To avoid falling or damage, please do not place this unit on an unstable cart, stand, or table.
Operate unit only on the specified supply voltage.
Disconnect power cord by connector only. Do not pull on cable portion.
Do not place or drop heavy or sharp-edged objects on power cord. A damaged cord can cause fire or electrical shock hazards. Regularly check power cord for excessive wear or damage to avoid possible fire / electrical hazards.
Ensure unit is always properly grounded to prevent electrical shock hazard.
Do not operate unit in hazardous or potentially explosive atmospheres. Doing so could result in fire, explosion, or other dangerous results.
Do not use this unit in or near water.
Do not allow liquids, metal pieces, or other foreign materials to enter the unit.
Handle with care to avoid shocks in transit. Shocks may cause malfunction. When you need to transport the unit, use the original packing materials, or alternate adequate packing.
Do not remove covers, panels, casing, or access circuitry with power applied to the unit! Turn power off and disconnect power cord prior to removal. Internal servicing / adjustment of unit should only be performed by qualified personnel.
Turn off the unit if an abnormality or malfunction occurs. Disconnect everything before moving the unit.

Note: due to constant effort to improve products and product features, specifications may change without notice.

BRIEF INTRODUCTION

Overview

SE1217 is a HD audio and video encoder which can encode and compress HDMI video and audio source into IP stream, and then transmit it to streaming media server via network IP address to live broadcast on platforms like Facebook, YouTube, Ustream, Twitch, Wowza etc

Product Overview

Main Features

1×HDMI input, 1×HDMI loop out, 1×Analog audio input
Supports H.265/ H.264 stream encode protocol, up to 1080p60hz
Dual-stream (main stream and sub stream)
RTSP, RTP, RTMPS, RTMP, HTTP, UDP, SRT, unicast and multicast
Video and audio streaming or single audio streaming
Image and text overlay
Mirror image & upside-down image
Live stream with no need for connecting a computer

Interfaces

Product Interfaces

LAN PORT FOR STREAM
AUDIO INPUT
HDMI INPUT
RESET/ LED INDICATOR
DC 12V IN
HDMI LOOPOUT

SPECIFICATIONS

Video	Input: HDMI Type A ×1; Loop Out:HDMI Type A ×1
Analog Audio	3.5mm line in ×1
Network	RJ-45×1(100/1000Mbps self-adaptive Ethernet)

STANDARDS

HDMI In Format Support| 1080p 60/59.94/50/30/29.97/25/24/23.98/23.976,
1080i 50/59.94/60,

720p 60/59.94/50/30/29.97/25/24/23.98,

576i 50, 576p 50, 480p 59.94/60, 480i 59.94/60
Video Coding| H.265/ H.264
Video Bitrate| 16Kbps ~ 12MKbps
Audio Coding| ACC/ MP3/ MP2/ G711
Audio Bitrate| 24Kbps ~ 320Kbps
Encoding Resolution| 1920×1080, 1680×1056, 1280×720, 1024×576, 960×540,
850×480, 720×576, 720×540, 720×480, 720×404, 720×400,
704×576, 640×480, 640×360
Encoding Frame Rate| 5-60fps

SYSTEMS

Network Protocols| HTTP, RTSP, RTMP, RTP, UDP, Multicast, Unicast, SRT
Configuration Management| Web configuration, Remote upgrade

OTHERS

OPERATIONS GUIDE

Connect the encoder to network via a network cable. The default IP address of the
encoder is 192.168.1.168. The encoder can auto obtain a new IP address when it is using DHCP on the network,

Or disable DHCP and configure the encoder and computer’s network in the same network segment. The default IP address as below.

IP Address: 192.168.1.168
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1

Visit encoder’s IP address 192.168.1.168 through an Internet browser to login the WEB page for setting up. The default Username is admin, and password is admin.

Management Web Page

The encoding settings can be set on the encoder management web page.

Language Settings

There are languages of Chinese (中文), Japanese (日本語) and English for option on the top-right corner of the encoder management web page.

Device Status

The status of MAIN STREAM and SUB STREAM can be checked on the web page. And we also can have a preview on the streaming video from PREVIEW VIDEO.

Device Status

Network Settings

The network can be set to dynamic IP (DHCP Enable) or static IP (DHCP Disable). The default IP information can be checked in Part 3.1.

Network Settings

Main Stream Settings

The main stream can be set to mirror image and upside-down image from MAIN
PARAMETER tab. Configure main stream network protocol RTMP/ HTTP/ RTSP/ UNICAST /MULTICAST/ RTP/ SRT accordingly. Please note that only one of HTTP/ RTSP/ UNICAST /MULTICAST/ RTP can be enable at same time.

Main Stream Settings

Sub Stream Settings

Configure sub stream network protocol RTMP/ HTTP/ RTSP/ UNICAST/ MULTICAST/ RTP/ SRT accordingly. Please note that only one of HTTP/ RTSP/ UNICAST/ MULTICAST/ RTP can be enable at same time.

Sub Stream Settings