Saramonic SR-BH900 Wireless Active Noise-Cancelling Headphones User Manual
- June 6, 2024
- Saramonic
Table of Contents
SR-BH 900
User Manual
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
**Packing List
**
**Product Overview
**
a.
Charging Indicator
b. Microphone
c. AND Indicator
d. Pairing Indicator
- ANC Button/Ambient Sound Button
- Type-C Charging Port
- Voice Assistant Button
- Power Button
- Touchpad
- 3.5mm AUX Port
LED Indicator Status
Equipment status | Indicator light | Icon | Voice prompt |
---|---|---|---|
Power on | Red & Blue indicators flashing alternately | Power on | |
Power off | Red indicator flashing 1s | Power off | |
Bluetooth connected | Blue indicator flashes 1 time / 5s | Connected | |
Charging | Indicator solid red | / | |
Fully charged | Indicator solid blue | / | |
Low battery | Red indicator flashing for 2 times/ 1s | Battery low | |
Pairing | Red & blue indicators flashing alternately | / | |
Playing | Blue indicator flashes 1 time/5s | / |
Specifications
Model | SR-BH900 |
---|---|
Bluetooth Version | Bluetooth V5.0 |
Supported Audio Format(s) | aptX, SBC, and AAC audio codecs |
Operating Distance | 10m |
Noise Reduction Rating | 28db |
Battery Capacity | About 2.5 hours |
Playtime | Approx. 17 hrs (BT ON, ANC ON) Approx. 25 hrs (BT ON, ANC OFF) |
Approx. 41 hrs (BT OFF, ANC ON)
Standby time (BT connected)| Approx. 26 hrs (ANCON) Approx. 120 hrs (ANC
OFF)
Dimensions| 21016580mm
Weight| About 260g
Note: BT= Bluetooth, ANC= active noise canceling
Functions- Quick Guide
-
Power Button
• Power on press and hold for 4s
• Power off the press and hold for 4s
• Pairing Mode: If not connected with any devices the headphone will enter pairing mode automatically. If connected with a device, power off the headphone, press and hold the power button for 8s, the voice prompts change from “Power on” to “Pairing” to Du”, the headphone will enter pairing mode.
• Answer/End a call: short press.
•Decline an incoming call: double short press. -
Voice Assistant Button
Voice assistant: press and hold for about 1.5 seconds. -
ANC Button (Active Noise-Cancelling)
(Short press in any status to switch the mode)
• Turn on the ANC Mode: ANC Indicator solid green
• Turn on the Ambient Sound Mode: ANC Indicator solid white
• Turn off the ANC Mode: ANC Indicator light off
-
Touchpad
• Volume up: slide up
• Volume down: slide down
• Next song: slide-right
• Last song: slide left
• Play/Pause: double click -
Charging Port
(Charging with Type-C charging cable)
Headphone status | Voice prompt | Indicator |
---|---|---|
Low battery | Battery low | The red indicator flashes 2 times/s |
Low battery and powered off automatically | – | The red indicator flashes 1s and |
turns off
6. 3.5mm AUX Port
In AUX mode, the Bluetooth, voice assistant button, and the touchpad will be
disabled, the ANC button is still available.6. 3.5mm AUX Por
In any mode, connect headphones with the device using supplied audio cable
via AUX port. The headphone will switch to UX mode automatically, and
Bluetooth mode will automatically turn off.
AUX mode needs no battery.
User Guide
Pairing
- If not connected with any devices, the headphone will enter pairing mode automatically after being powered on. If connected with the 1st device, power off the headphone, press and hold the power button for 8s, the voice prompts change from “Power on” to Pairing” to “Du”, the headphone will enter pairing mode and can be paired with the 2nd device.
- Indicator light flashing red and blue alternately.
- Search the Saramonic BH900 on the Bluetooth list of the second device, select it and connect the headphone.
- Voice prompt “connected”.
Notes: The pairing mode will last for 10 minutes. If there is no Bluetooth connection with any device for more than 10 minutes, the headphone will automatically turn off.
Wear the headphones and adjust to a comfortable size and position as below
image.
Connect an Additional Bluetooth Device
- Connect the headphone with the first device.
- Turn off Bluetooth on the first device, the headphone will enter pairing mode automatically again.
- Search the Saramonic BH900 on the Bluetooth list of the second device, select it and connect the headphone.
- Go back to the first device, select Saramonic BH900, and connect.
- Now the headphone is connecting with two devices simultaneously.
**Q &A**
Q: Failed to connect devices with headphones
A: Please ensure your headphones are in pairing mode. Then delete the
pairing record on the Bluetooth devices and reconnect with headphones.
Q: Failed to turn on the headphones?
A: Please check the battery status of your headphones
Q: Can I replace the battery in the headphones?
A: No. These headphones use a built-in non-detachable Li-Polymer battery
which can not be replaced.
Q: Can I use the headphones while driving?
A: For your safety, we strongly recommend you do not use headphones while
driving in order to avoid distractions
Q: Why is the connection sometimes disconnected within 10 meters?
A: If there are many WiFi routers, 4G signals, high-power electrical
appliances, etc when using, it may be interfering with the Bluetooth
connection. It can be solved by changing the environment or reconnecting.
Q: No sound from my computer or mobile phone?
A: Please check if the output channel of your computer supports the A2DP
profile. Also, check the volume settings on your headphones and
computer/mobile phone.
Q: Why am I unable to control the volume of a track playing on my mobile
phone’s APPs?
A: The configurations of various application software are different, the
headphones may not be completely compatible with some APPs.
Q: What should I do if the Bluetooth connecting function cannot close or
open?
A: Please reset the Bluetooth function of the headphones by inserting an
audio cable into the audio port and removing it.
Q: Why does Bluetooth turn off when I connect an audio cable?
A: This is one of BH900 special features. When the user inserts an audio
cable in the audio port, all Bluetooth feature buttons temporarily stop
working and Bluetooth turns off. The Bluetooth will be available again when
pulling out the audio cable.
Safety instructions
- Read these safety instructions carefully.
- Keep these safety instructions.
- Pay attention to all warnings.
- Follow all instructions.
- Clean the headphones only with a dry cloth.
- Choking hazard: The device contains small parts and is not suitable for children.
- Do not place the device near heat sources such as radiators, hot air regulators, fireplaces, or heat-generating speakers (including amplifiers).
- Do not use the device in places where you must concentrate on your surroundings, such as while driving a car, etc.
- Do not immerse the device in water or expose it to a humid environment for long periods of time. Do not use it while swimming or surfing.
- High volume music may cause hearing loss after a while. If you have tinnitus (ringing in the ears), pain, or discomfort after singing an ear sound device, the volume is probably too high for your ears.
- To prevent hearing loss, lower the volume of the music player before plugging in your mobile phone and then gradually increase to a comfortable volume.
- It is recommended to use the accessories specified by the manufacturer.
- Do not expose the battery to excessive heat such as sunlight, fire, etc.
- Make sure the power supply is within the specified voltage range.
- Rely on our personnel. If there is a defect on the device, it must be repaired by a professional. The headset will not function properly if: the power cord or plug is damaged, there is water in the device, foreign objects have fallen into the device, the device is exposed to rain or moisture, or the device falls from a height.
- Should a battery cell leak, please do not allow the liquid to come in contact with skin or eyes?
- Please do not use your headphones in immediate proximity (10 cm) of a pacemaker.
- Please do not expose the headphones to temperatures below -20°C or above +45°C.
- Please do not charge the headphones in temperatures below 0°C or above +45°C.
Please do not use the headphones near water, bathtubs, sinks, saunas, pools, other liquids, or moist areas.
Warranty Conditions
A new product was purchased in the Alza.CZ sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person, or mechanically through the fault of the buyer (e.g. during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage, and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design, or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative:
Importer : Alza.CZ a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
The subject of the declaration:
Title: Wireless Active Noise-Cancelling Headphones
Model / Type: SR-BH900
The above product has been tested in accordance with the standard(s) used
to demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive RED No. (EU) 2014/53/EU
Directive RoHS No. (EU) 2011/65/EU as amended 2015/863/EU
Prague
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal f this type of waste may result in fines in accordance with national regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>