Tuya E8 Smart Camera Instruction Manual

Tuya E8 Smart Camera

Thank you for using smart camera

Product Introduction

Packing 11st: Smart Camera x 1, Manual x 1, USB Power Cord , 1, Power Adapter x 1,Screw Accessories Package x 4

Basic Parameters

• Product Name: Smart Camera
• Pixel: 2.0MP/3.0MP 16.0MP
• Video Compression: H .265 High Profile
• Image Enhancement: Digital Wide Dynamic 30 Noise Reduction
• Local Storage: MicroTF card
• Wireless Encryption: WEP/WPAJWPA2 Encryption
• Power Input: 12V 1A(Mln)
• Total Power Consumption: SW (Max)
• WlrelessStandard: 2.4G 802.11 blgln
• Support Platform: AndroidliOS

Component Description:
Reset Button: Long press “reset” hole 5sec, reset success.
It Is recommended to lnsert8-128GB high-speed Micro TF card, otherwise it will not be able to store. view historical video and support Important functions such as firmware upgrading.

Install APP

Download APP· scan the QR code below to download and install. Register and log in: open the “TuyaSmart” APP to register and login according to the prompts.

Add The Device-Sca n QR code mode

• Make sure Wi-Fi is available and connected to the Internet.

• Connect the camera to the power, then system startup completed

• Open “TuyaSmart” APP. press the ‘+’ in the upper right corner of the main screen (Figure 01 ); choose “Camera& Lock·. click “Smart Camera” (Figure 02) to add camera; and then click “Next step” (Figure 03):
  

• If the mobile phone is not connected to wi-fi, please click “Connect to W1-fi” (Figure 04 );

• It will Jump to the WLAN interface and connects Wi-FI (Figure 05).Please note that only 2.4 GH Wi-Fi network is supported;

• If the phone Is connected to WI-Fl (Figure 06),

• click “Confirm”. It will jump to the interface fo prompt to scan the QR code with camera and click “Continue” (Figure. 07);

• An OR code will prompt on your screen and you need to scan it with the Smart Camera. (the camera is about 20-30 cm away from the mobile phone tens). Then click “hear the prompt sound” (Figure. 08)  “connecting ” (Figure_ 09);

• When the progress reaches 100%,connection oompleted(Figure 10), and click “Finish”;

• Then Jump to preview interface (Figure 11)

• After closing the device preview interface, the Interface returns to the APP home page. At this time, the connected device will appear on the APP home page (Figure 12). Then you can click directly to the device Interface to see the monitonng sttuation without re-adding afterwards.

Add The Device-AP Mode
If you want to use AP Mode,press the reset button on the machine

• Make sure WI-Fl is available and connected to the Internet.

• Connect the camera to the power, system startup completed.

• Open “TuyaSmart” APP, press the’+’ in the upper right corner of the main screen (Figure 13); choose ·camera& Lock·. click “Smart Camera”  (Figure 14) to add camera : Alternatively, choose “other ways” to add (as shown in Figure 15);
  Note :Before using the “AP Mode” , you need to switch to “AP Mode” by lightUy pressing the “Reset key” of the device

• Then click “hot spot configuration” (Figure 16;

• Then click” oompat1billty mode”, click”Next” (Figure 17):

• Then click “change Network” (Figure 18);

• Then enter the password to complete the connection (Figure 19):

• Click Back and return to the APP compatible mode Interface, where the WI-Fi name and the connected WI-Fl name are displayed Password, check the “Confirm” button (Figure 20);

• The page jumps to where the interface prompts “Wt-fl” to connect to the device hotspot and clicks “Connect” (Figure 21) 

• The interface jumps to the WALN connection Interface, finds the Wi-Fi at the beginning of “Smart Lifi”, and clicks on the connection (Figure 22):

• When the connection is completed, click back and return to the APP interface, at which time the APP display device is connected (Figure 23).

• At this time. the device has been successfully connected: the interface Jumps to “Add Device Successrut· (Figure 24 );

• Then click “connected”, ii will jump to the Preview interface of the Device (Figure 25)

• Close the device preview interface and the interface returns to the APP home page, at which point the connected device will appear on the APP home page.(Flg. 26), After entering the device interface to view. no need to re-add, click directly Into the device Interface to view.

APP Video Browsing Details

Matters Need Attention

• Try to keep away from the metal space.
• Avoid the furniture , microwave oven blocked;
• Avoid the space where the audio, video and data lones are wound. and keep the space away from them as large as possible,
• Ensure that as close as possible to the coverage of wireless Wi-FI signals. Switching network environment:
• In the new network environment, please press the reset hole about 5 seconds, then connect to the- network.

The name and content of the harmful substances in the product

This product conforms to RoHS environmental protection requirements. At present, there is no mature technology in the world to replace or reduce the lead content in the electronic ceramics. porcelain, optical glass, steel and copper allow

• Maintenance records:
• Maintenance time,
• Fault conditions:
• Fault cause,
• Troubleshooting
• Return and exchange proof,

Maintenance voucher of intelligent Customer

• Address:
• Model:
• Device store:
• Store address:
• Store contact number:
• Mobile:
• Camera ID:
• Date of purchase:

Maintenance voucher of Intelligent

• Customer. __ .. _ Mobile: __ ____
• Address: _____ —————————————–
• Model: Camera ID:
• Device store:_ Date of purchase:
• Store address: ____
• Store contact number: __ •

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>