milwaukee M12FMT FUEL 12V 2.0 4.0Ah Li-Ion RedLithium Brushless Cordless Multi-Tool Instruction Manual

Milwaukee M12FMT FUEL 12V 2.0 4.0Ah Li-Ion RedLithium Brushless Cordless

Multi-Tool

INSTRUCTION

Text section with Technical Data, important Safety, and Working Hints, and description of Symbols

Remove the battery pack before starting any work on the machine

Allow the tool to come to full speed before beginning the work

TECHNICAL DATA MULTITOOL

Production code …………………………………………………………………..4834 50 01……………………000001-999999

• Battery voltage ………………………………………………………………..12 V
• Weight according to EPTA-Procedure 01/2014 (2.0 Ah) …………..1,25 kg
• Weight according to EPTA-Procedure 01/2014 (4.0 Ah) …………..1,47 kg
• Oscillating angle left/right ………………………………………………..1,95°/ 1,95°
• Deltasander no-load oscillation frequency …………………………..10000-20000 min-1
• Recommended ambient operating temperature …………………..-18°C … +50 °C
• Recommended battery types …………………………………………….M12B…
• Recommended charger ……………………………………………………M12-18 C; M12-18 FC; M12-18 AC; M12 C4; C12 C

Noise/Vibration Information

• Measured values determined according to EN 62841
• Typically the A-weighted sound pressure level of the tool is:
  • Sound pressure level (Uncertainty K=3dB(A)) …………………….77,78 dB (A)
  • Sound power level (Uncertainty K=3dB(A)) …………………………88,78 dB (A)

Wear ear protectors

• Total vibration values (vector sum in the three axes) are determined according to EN 62841.
• Vibration emission value ah 1
• Sanding ……………………………………………………………………….4,56 m/s2
• Uncertainty K = …………………………………………………………….1,50 m/s2
• Cutting wood ………………………………………………………………..10,01 m/s2
• Uncertainty K = …………………………………………………………….1,50 m/s2
• 1 with saw blade bimetal, dimension 81 x 34 x 1,25 mm

WARNING

The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration and noise emission level represents the main applications of the tool. However, if the tool is used for different applications, with different accessories, or poorly maintained, the vibration and noise emission may diff er. This may signifi cantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintaining the tool and the accessories, keeping the hands warm, and organization of work patterns.

WARNING

Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

MULTITOOL SAFETY WARNINGS

Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a „live“ wire may make exposed metal parts of the power tool „live“ and could give the operator an electric shock. Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and may lead to loss of control

ADDITIONAL SAFETY AND WORKING INSTRUCTIONS

Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dust masks, protective gloves, sturdy non-slip footwear, helmet, and ear defenders. The dust produced when using this tool may be harmful to health. Do not inhale the dust. Wear a suitable dust protection mask. Do not machine any materials that present a danger to health (e.g. asbestos). Switch the device off immediately if the insertion tool stalls! Do not switch the device on again while the insertion tool is stalled, as doing so could trigger a sudden recoil with a high reactive force. Determine why the insertion tool stalled and rectify this, paying heed to the safety instructions.

The possible causes may be

• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
• the power tool is overloaded
• Do not reach into the machine while it is running.
• The insertion tool may become hot during use.

WARNING  Danger of burns

• when changing tools
• when setting the device down

Chips and splinters must not be removed while the machine is running. When working on walls ceilings, or floor, take care to avoid electric cables and gas or water pipes. Clamp your workpiece with a clamping device. Unclamped workpieces can cause severe injury and damage. Do not use cracked or distorted saw blades. Plunge cuts without pre-drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by burning them. Milwaukee Distributors off er to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk). No metal parts must be allowed to enter the battery section of the charger (short circuit risk). Use only System M12 chargers for charging System M12 battery packs. Do not use battery packs from other systems. Never break open battery packs and chargers and store only in dry rooms. Keep dry at all times. Battery acid may leak from damaged batteries under extreme load or extreme temperatures. In case of contact with the battery, acid washes it off immediately with soap and water. In case of eye contact rinse thoroughly for at least 10 minutes and immediately seek medical attention.

Warning

To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack, or charger in  FLuid or allow a fluid to fl ow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, bleach or bleach-containing products, etc., can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The Maschine can be combined with different tools and is designed for the following use

• Sander Head: sanding wood, metal, and plastics Segment saw blade head: for cutting flush to a surface in wood and plastics.
• Universal blade head: for working in wood. Do not use this product in any other way as stated for normal use.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that the product described under “Technical Data” fulfills all the relevant regulations and the directives 2011/65/EU (RoHS), 2014/30/EU, 2006/42/EC, and the following harmonized standards have been used

• EN 62841-1:2015
• EN 62841-2-11:2016+A1:2020
• EN 62841-2-4:2014
• EN 55014-1:2017+A11:2020
• EN 55014-2:2015
• EN IEC 63000:2018
• Winnenden, 2021-01-15
• Alexander Krug
• Managing Director
• Authorized to compile the technical fi le.
• Techtronic Industries GmbH
• Max-Eyth-Straße 10
• 71364 Winnenden
• Germany

GB-DECLARATION OF CONFORMITY

We declare as the manufacturer under our sole responsibility that the product described under “Technical Data” fulfills all the relevant provisions of the following Regulations S.I. 2008/1597 (as amended), S.I. 2016/1091 (as amended), S.I. 2012/3032 (as amended), and that the following designated standards have been used

• BS EN 62841-1:2015
• BS EN 62841-2-11:2016+A1:2020 BS EN 62841-2-4:2014
• BS EN 55014-1:2017+A11:2020 BS EN 55014-2:2015
• BS EN IEC 63000:2018
• Winnenden, 2021-01-15
• Alexander Krug
• Managing Director
• Authorized to compile the technical fi le.
• Techtronic Industries GmbH
• Max-Eyth-Straße 10
• 71364 Winnenden
• Germany

BATTERIES

Battery packs that have not been used for some time should be recharged before use. Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and battery packs must be kept clean. For an optimum lifetime, after use, the battery packs have to be fully charged. To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged. For battery pack storage longer than 30 days store the battery pack where the temperature is below 27°C and away from moisture Store the battery packs in a 30% – 50% charged condition Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION

The battery pack has overload protection that protects it from being overloaded and helps to ensure long life. Under extreme stress, the battery electronics switch off the machine automatically. To restart, switch the machine off and then on again. If the machine does not start up again, the battery pack may have discharged completely. In this case, it must be recharged in the battery charger.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. Transportation of those batteries has to be done in accordance with local, national, and international provisions and regulations.

• The user can transport the batteries by road without further requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject to Dangerous Goods regulations. Transport preparation and transport are exclusive to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries

• Ensure that battery contact terminals are protected and insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within packaging.
• Do not transport batteries that are cracked or leak. Check with forwarding company for further advice

MAINTENANCE

Use only Milwaukee accessories and spare parts. Should components need to be replaced which have not been described, please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the machine type printed as well as the six-digit No. on the label and order the drawing at your local service agents or directly at Techtronic Industries GmbH, Max-Eyth- Straße 10, 71364 Winnenden, Germany.

SYMBOLS

• CAUTION! WARNING! DANGER
• Remove the battery pack before starting any work on the machine.
• Please read the instructions carefully before starting the machine.
• Wear gloves!
• Always wear goggles when using the machine.
• Do not dispose of electric tools, batteries/rechargeable batteries together with household waste material.
• Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
• Check with your local authority or retailer for recycling advice and collection point.
• Stroke rate under no-load
• Volts
• Direct current
• European Conformity Mark
• British Conformity Mark
• Ukraine Conformity Mark
• Eurasian Conformity Mark

Copyright 2021

• Techtronic Industries GmbH Max-Eyth-Str. 1071364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu
• Techtronic Industries (UK) Ltd Fieldhouse Lane  Marlow Bucks SL7 1HZ UK

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>