one LIGHT 65660AT Adjustable Power Spot Track light Instruction Manual
- June 3, 2024
- one LIGHT
Table of Contents
one LIGHT 65660AT Adjustable Power Spot Track light
Dimension
Instruction
-
To mount the track adaptor into the track system, first check that the selector knob A is at OFF position and the adaptor lock B is disengaged.
-
When installing the adaptor into the track, ensure that it is orientated correctly.
-
Rotate adaptor lock B clockwise 90° to connect the adaptor to the neutral circuit.
-
Rotate selector knob A to the position of desired circuit.
a. Circuit 1: Rotate the knob (A 90° clockwise from the starting position OFF, to connect circuit 1.
b. Circuit 2: Rotate the knob 90° anti-clockwise from the starting position OFF, to connect circuit 2.
c. Circuit 3: Rotate the knob (A 180° clockwise from the starting position OFF, to connect circuit 3.
Warnings:
- Make sure that the product is installed properly before connecting to electricity.
- Do not cover the fitting.
- Maintenance and installation should only be carried out by a professional electrician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>