ANKER Y1370 Replacement Parts Kit for Charging Dock for Oculus Quest 2 User Manual

: June 5, 2024
: Anker

Table of Contents

ANKER Y1370 Replacement Parts Kit for Charging Dock for Oculus Quest 2
Safety Instructions
Setting
In The Box
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER Y1370 Replacement Parts Kit for Charging Dock for Oculus Quest 2

Safety Instructions

Read all the instructions before using the product. Please refer to the electrical and safety information before installing or operating the product.

Store the product in a cool and dry place.
Do not store the product in a hot or humid environment.
Operating temperature should be between 0°C to 40°C.
Do not disassemble the product.
Do not leave or dispose of the product in both extremely low air pressure and extreme heat such as sunshine, fire, or the like.
Do not clean the product with harmful chemicals or detergents.
Misuse, dropping or excessive force may cause product damage.
When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
Be aware the discharged battery may cause fire or smoke, tape the terminals to insulate them.
Do not subject the product to mechanical shock, crushing, or cutting.
Do not short-circuit the product or be short-circuited by other metal objects.
To reduce the risk of injury, close supervision is necessary when this product is used near children or keep the product out of the reach of children.
Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
Do not use the product that is damaged or modified. It may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
Attention should be drawn to the environmental aspects of battery disposal.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
CAUTION: Risk of fire or explosion if the battery is replaced by an incorrect type. Replace only with the same or equivalent type. Rechargeable Ni-MH battery mode: Ni-MH AA 1800mAh 1.2V,
Made By: Yiyang Corun Battery Co., Ltd.

Setting

In The Box

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help. The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC

Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973
Notice to canadian users
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type Y1010 is in compliance with Directives 2014/35/EU & 2014/30 /EU & 2011/65/EU & 2009/125/EC.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
ANKER TECHNOLOGY (UK) LTD
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany
Indoor use only.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
Customer Service
18-month limited warranty
Lifetime technical support
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.