skullspeaker Purrefect Speaker Unique Cat User Manual
- June 5, 2024
- skullspeaker
Table of Contents
Thank you for purchasing Purrrfect Speaker. Please read this manual carefully before use. We will not be responsible for any damage caused by using the speaker improperly.
Safety Instruction:
Please read and follow the instructions below to ensure that you can use this unit safely and in the correct method. Please keep this manual for future reference.
Warning: To prevent any fire or electrical hazards, do not disassemble or replace any part of the unit. Please contact a professional maintenance person or qualified service center if there is any damage to the unit.
- Do not use fast charging adapter.
- Do not let children play in this unit alone without adult supervision.
- This product is not waterproof; put it away from high temperatures. Freezing area will decrease this product’s performance;
- Don’t block the area above the speaker mesh.
Accessories
- Mini USB cable ( for charging )
- 3.5mm Audio cable ( Aux input cable )
Aux input connector.
Plug the speaker into another device with a mini aux, turn on the speaker and it will automatically play the music after 2 seconds.
Function
The speaker has a Bluetooth function and supports stereo audio Bluetooth transmission. No need to use complicated connections or long wires – just listen to high-quality music! Support TF card reader.
Bluetooth Function:
Switch the power button located on the bottom of the speaker. The sound will be followed by the RGB color-changing lights. The device is now in searching mode.
Connect to mobile phone.
- Select phone Bluetooth mode and start searching for the devices, iPhone will automatically go into Bluetooth search mode.
- If your phone screen displays 78′ this means your phone has found the Bluetooth speaker – select and connect it.
- If you need to enter the password to connect, please enter “0000”.
- If the connection was successful, the Bluetooth symbol on the display of your phone will change color or shape. Now you can play music on your mobile phone.
Specifications
Speaker Interface: Audio input connector; 3.5mm aux cable: support aux
external audio input
Charging interface: Mini USB Cable
Dimension: AS x 4.4″x 5.2″ (11,5cm x 11,3cm x 13,2cm)
Material: Base ABS plastic
Weight: 0.9Ib (410g)
Electrical Specifications:
Compatibility: Adapted Bluetooth 2.1, support A20P V1.2, AVRCP V1.4 profiles,
TF
Transmission distance: 33ft (10 m).
Transmission distance can change due to different environmental factors and
phone Bluetooth device
Maximum output power: 5W
Signal to noise ratio S / N: z 75dB
Frequency Range: 60Hz-15KHz
Distortion THD: 51% Speaker unit: outer diameter 2,24 in (5,7 cm), 5W
Power parameters:
Rated voltage: 3.7V DC
Battery: lithium-ion battery, 3.7V/1500mA
Charge voltage: 5V ± 0.25V
Charging time: 2-3 hours
Computer connection:
No need to install the Bluetooth software if the computer already has it.
- Click the Bluetooth icon on the right corner of the computer and select ‘Add the equipment;
- It will search the Bluetooth devices automatically and the speaker will be shown;
- Turn on the speaker and the computer will auto-install the driver and will show succeeded installation;
- If you need to enter a password to connect, please enter “0000”;
- Now you can select the previous or next song on the computer screen.
Function|
User entry
---|---
Power On / Off| Switch ON OFF button to turn on or off the speaker.
Led RGB lights| Long press to turn off the lights. Long press again to switch
between green/red/blue/changing modes.
Volume| Hold button to adjust the volume.
Next/Previous song| Press 8 buttons to change the songs.
Bluetooth/FM mode| Press to switch modes When FM mode is on hold button to
search for active radio stations.
Answer or end call| During an incoming call, press buttons to answer a phone
call. Press button again to end the phone call.
2 speakers pairing| Power on both speakers (speakers must be disconnected
from all Bluetooth devices).
Hold buttons on one of the speakers for 5 sec. (until you hear a second
connection sound).
Connect the speaker to your Bluetooth device.
Light mode 1| Smooth transition between colors.| Light mode 1 turns on
automatically when the speaker is powered on.
---|---|---
Light mode 2| Red light color mode.| Hold St release M to switch between light
modes. Light modes 2, 3,
Light mode 3| Greenlight color mode.
Light mode 4| Blue light color mode.
Light mode 5| Turning the light off.
Remarks: Switch ON OFF to turn on/ off the speaker, button switches modes. Short press e change songs. Under Bluetooth mode when the 3.5mm audio plug is inserted in, the speaker will switch to line in status. Note: Please turn off the speaker when it is not used, to prevent power loss.
Aux Operation:
Line-in function: turn on the speaker, 3.5mm AUX line cable plug into the Line-in port, and the speaker will automatically switch to line-in mode.
Troubleshooting problems:
Cannot find the speaker – check if the speaker is turned on. The device finds the speaker but cannot connect to it – check if the speaker has been disconnected from all other devices (laptop, another cell phone, etc.). The maximum Bluetooth speaker and mobile phone connection distance is 33 feet (10 meters). If the sound is too quiet – check your mobile phone or your computer sound settings, and set the volume to the desired level.
Device charging:
Connect the mini USB charging cable to the computer or another USB charger. Red light indicates that the speaker is charging. (2-3 hours for the full charging time.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>