UGREEN MU006 Ergonomic Wireless Mouse User Manual

UGREEN MU006 Ergonomic Wireless Mouse

Product Overview

• Left Button
• Right Button
• Scroll Wheel
• Switch Button {Operating System Switching. DPI Adju5tment)
• Forward Button
• Back Button
• Indicator
• Mouse Feet Film (Removable)
• On/Off Slider Switch
• Option,l Seru,;or
• Receiver

Wireless 2.4G Connection

• Step l:Take the receiver out and insert it into USB port
• Step 2: Tum on the product and the indicator lights on
• Step 3: Randomly dick the mouse to make sure it works normally.

Forced Pairing If you cannot pair the product with your devices, please do as follows:

1. Take the receiver out of the mouse
2. press and hold “Left + Right + scroll wheel simultaneously for 3 seconds until the indicator starts blinking.
3. Insert the receiver into the device

Operating System Switching

1. The exact usage of scroll wheel, forward and back buttons varies from different operating systems
2. The product defaults to Windows, when using on macos, please press and hold the switch button for l second

DPI Adjustment

1. L The indicator blinks as follows according to differentDPI adjustment
2. The DPI value defaults to 1600, press once DPlswitch button to adjust the mouse ,;ensitivity in the order of 1600 > 2000 > 4000 > 800 > 1200

Package Contents

Specifications

Important WEEE Information

This symbol on the product(s) and /or accompanying documents indicates tnat, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling. please take this product(s) to designated collection points where it will be accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative erfects on human health and the environment, which cOuld otherwise arise from inappropriate waste handling Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
For professional users in the European Union
lf you wish to discard electrical and electronic equipment (EEE), please contact your dealer or Supplier for further information.
For disposal in countries outside of the European Union
This symbol is only valid in the European Union (EU). If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.

Warranty Information

A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems. Learn more about the EU Declaration of Conformity: https://[www.ugreen.com/download](http://www.ugreen.com/download)/

FCC Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning :
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction With any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interterence in a residential installation. This equipment generates uses and can radiate radio frequency energyand, if not installed and used in accordance wth the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interterence to radio or television reception, which can be determined by tuming the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorientor relocates the receiving antenna.
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

IC

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• reorient or relocate the receiving antenna.
• increase the separation between the equipment and receiver.
• connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>