skullspeaker Mad Skull Dog Speaker User Manual

skullspeaker Mad Skull Dog Speaker

Thank you for purchasing Beast Speaker. Please read this manual carefully before use. We will not be responsible for any damage caused by using the speaker improperly.

Safety Instruction:

Please read and follow the instructions below to ensure that you can use this unit safely and in a correct method. Please keep this manual for future reference.
Warning: To prevent any fire or electrical hazards, do not disassemble or replace any part of the unit. Please contact a professional maintenance person or qualified service center if there is any damage to the unit.

1.  Do not use fast charging adapter.
2. Do not let children play this unit alone without adult supervision.
3. This product is not waterproof; put it away from high temperature. Freezing area will decrease this product performance;
4.  Don’t block the area above the speaker mesh.

Accessories:

1.  Mini USB cable ( for charging )
2.  3.5mm Audio cable ( Aux input cable )

Aux input connector

Plug the speaker to other device with mini aux, turn on the speaker and it will automatically play the music after 2 seconds.

Function:

The speaker has a Bluetooth function and supports stereo audio Bluetooth transmission. No need to use complicated connections or long wires – just listen to high quality music! Support TF card reader.

Bluetooth Function:

Press the power button until you hear a sound. The sound will be followed by the blue light flashing. The device is now on searching mode.

Connect to mobile phone:

1.  Select phone Bluetooth mode and start searching for the devices, iPhone will automatically go into Bluetooth search mode.
2.  If your phone screen displays ‘AERDBULL’ this means your phone has found the Bluetooth speaker – select and connect it.
3.  If you need to enter the password to connect, please enter “DODO”.
4.  If the connection was successful, the Bluetooth symbol on the display of your phone will change color or shape. Now you can play music from your mobile phone.

Specifications:

Speaker Interface:

• Audio input connector; 3.5mm aux cable: support aux external audio input Charging interface: Mini USB Cable
• Dimension: 5.2″ x 4.B”x 5.5″ (13,2cm x 11,Scm x 13,2cm)
• Material: Base ABS plastic
• Weight lib (460g)

Electrical Specifications:

• Compatibility: Adapted Bluetooth 2.1, support A2DP Vl.2, AVRCP Vl.4 profiles, TF
• Transmission distance: 33ft (10 m). Transmission distance can change due to different environmental factors and phone Bluetooth device
• Maximum output power: SW
• Signal to noise ratio S / N: ;;: 75dB
• Frequency Range: 60Hz-15KHz
• Distortion THO: :5 1%
• Speaker unit: outer diameter 2,24 in (5, 7 cm), SW

Power parameters:

• Rated voltage: 3. 7V DC
• Battery: lithium-ion battery, 3. 7V /120DmA
• Charge voltage: 5V ± 0.25V
• Charging time: 2-3 hours

Computer connection:

No need to install the Bluetooth software if computer already has it.

1.  Click the Bluetooth icon on the right corner of computer and select ‘Add the equipment
2.  It will search the Bluetooth devices automatically and speaker will be showed;
3.  Turn on the speaker and computer will auto install the driver and will show Succeeded instalation;
4.  If you need to enter a password to connect, please enter “0000”;
5.  Now you can select the previous or next song on the computer screen.

Function                                            User Entry

Power On| Long press power button for 3 sec. After the tone release the button.
Power Off| Long press power button.
Volume| Hold button to adjust volume.
Next/Previous song| Press button to change the songs.
2 speakers pairing| Power on both speakers (speakers must be disconnected from all Bluetooth devices). Hold M button on one of the speakers for 5 sec. (until you hear a second connection sound). Connect the speaker to your Bluetooth device.
For version with RGB lights only
Light mode 1| Smooth tran sition between colors.| Light mode 1 turns on automat ically, when speaker is powered on.
Light mode 2| Blinking and changing color every second.| Do uble press M to swit ch between light modes. Light mode 2, 3, 4, 1
Light mode 3| Light increase and decrease accord in g to music beat.
Light mode 4| Turning light off.

Remarks: Long press (U to turn on/ off the speaker, button M switches modes. Short press change songs. Under Bluetooth mode when the 3.5mm audio plug is inserted in, the speaker will switch to line in status.
Note: Please tun off the speaker when it is not use, to prevent power loss.

Aux Operation

Line-in function: turn on the speaker, 3.5mm AUX line cable plug into the Line in port, the speaker will automatically switch to line in mode.

Troubleshooting problems

• Cannot find the speaker – check if the speaker is turned on.
• Device finds the speaker but cannot connect to it – check if the speaker has been disconnected from all other devices (laptop, other cell phone, etc.)
• Maximum Bluetooth speaker and mobile phone connection distance is 33 feet (10 meters).
• The sound is too quiet check your mobile phone or your computer sound settings, set the volume to the desired level.

Device charging

Connect the mini USB charging cable to computer or other USB charger. Red light indicates that speaker is charging. (2-3 hours for the full charging time.)
www.skullspeaker.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>