SCARLETT SC-KS57P39 Digital Kitchen Scale Instruction Manual
- June 5, 2024
- SCARLETT
Table of Contents
SC-KS57P39 Digital Kitchen Scale
Instruction Manual
Digital Kitchen Scale
DESCRIPTION
- Body
- Digital liquid crystal display
- «ON/TARE» button
- Batteries compartment
- Unit of measure switch
- Battery 3V CR2032
INSTRUCTION MANUAL IMPORTANT SAFEGUARDS
- Please read all instruction manuals before use and save it for future reference.
- For home use only. Do not use it for industrial or commercial purposes.
- Oiling of inner mechanism is not needed
- Do not shock the scale with sudden loading or striking.
- Do not overload the scale.
- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.
- The manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where the first two figures XX is the month of production, and the following four figures XXXX is the year of production.
OPERATING INSTRUCTIONS
START TO USE
- Open the battery compartment on the backside of the scale. Remove the safety film. The scale is ready for operation.
- Place the scale onto a flat hard horizontal surface. Do not place the scale on soft surfaces.
- Press «./» button to turn on the scale. Wait for a few seconds for the display to show a «0».
- Place the product onto the scale; the scale will indicate the weight of the product.
- On the backside of the scale, there is a unit of measure switch. Use it to set the units of measure: grams (g) or kilograms (kg) , pounds (lb) ounces (oz), milliliters water (ml water), milliliters milk (ml milk) .
- To weigh the products successively without removing them from the scale, press the «./» button to set the scale to zero before adding the next product.
AUTOMATIC SWITCHING OFF
- If the display shows «0» or the same weight reading for 2 minutes, the scale will automatically turn off.
OVERLOAD INDICATOR
- When the scale is overloaded, the display shows «EEEE».
BATTERY REPLACING
- Replace the battery when the display shows «Lo».
MAINTENANCE AND CARE
- Wipe the scale with a soft cloth and cleaner, and then dry it. Do not use any organic solvents, aggressive chemicals or abrasives.
STORAGE
- Complete all requirements of chapter MAINTENANCE AND CARE.
- Do not put anything on the scale when not in use.
- Keep the scale in a dry cool place.
The symbol on the unit, packing materials, and/or documentation means used
electrical and electronic units and the batteries should not be tossed in the
garbage with ordinary household garbage. These units should be passed to a
special receiving point.
For additional information about the actual system of the garbage collection
address it to the local authority. Valid utilization will help to save
valuable resources and avoid negative work on the public health and
environment which happens with incorrect using garbage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>