TWRAPS B5898 Front Mud Flaps For Tesla Cybertruck Installation Guide
- June 10, 2024
- TWRAPS
Table of Contents
TWRAPS B5898 Front Mud Flaps For Tesla Cybertruck
What’s Included
Installation Instruction
Note: This procedure details how to install the left mud flap. Instructions for the right side are mirrored.
Turn the steering wheel fully to the left to provide access to the working area.
Carefully use a push clip removal tool or flathead screwdriver to remove the upper push clips (x2) that secure the front wheel well liner.
Make sure the mud flap is aligned correctly with the holes in the front wheel
arch.
Install the new push clips.
Push the plastic rivet in to close the push clip.
Insert the lower screws (x2) provided with the kit.
What’s Included
Carefully use a push clip removal tool or flathead screwdriver to remove the upper push clips (x3) and bolt (x1) that secure the rear wheel well liner.
Peel back wheel well liner and install U-Nuts (x3) included with kit over the holes remaining from the push clips removed.
Tuck the wheel well liner back in, ensuring it is wedged beneath the inner edge of the bumper.
Insert the upper screws (x3) provided with the kit.
Insert the lower screw (x1) provided with the kit.