LAXIY 1077747 Vaxis Air Litecomm User Guide

**LAXIY 1077747 Vaxis Air Litecomm User Guide

**

Headset Icon

Power On/Off

Power On:

Press and hold the multi function button until the blue light flashes.
Hear the voice prompt ” On.””

Power Off:
Press and hold the multi function button until the red light flashes.
Hear the voice prompt “Off.”

Wearing

Separate the headsets with both hands and wear them to the appropriate position.

If you need to make a call, please lower the noise-canceling microphone and adjust it to the appropriate position.

Mute Mode

Operating Method:

1. Talk by rotating the noise-canceling microphone down and mute by rotating the noise-canceling microphone up.
2. Click the “multi function button” and listen for the headset prompt “Mic Off” or “Mic On” to disable or enable the noise-canceling microphone for conversation.

Volume Adjustment

Operating Method:

Single-click the volume up button to increase the volume, and single-click the volume down button to decrease the volume.When the volume is too high, you will hear a “beep” sound as a volume reminder.

It’s advised not to wear headsets at maximum volume for extended penods of time to avoid patential hearing damage.

NFC Pairing

1. Long-press the NFC button on the main device until the screen displays the message **“NFC On.”

**

2. Place the NFC tag on the headsets in contact with the NFC button on the main device.

3. On the main device, the NFC icon in the upper right corner will turn green,wait for 1to 3 seconds for the prompt indicating successful pairing.

4. The headset blue light being constantly on indicates a successful pairing.

Pairing with Other Electronic Devices

Bluetooth Pairing

1. In the power-off state, press and hold the “Multifunction Button” without releasing it.

2. Keep holding the “Multifunction Button” until the indicator light starts flashing red and blue alternately. This indicates that the headphones are now in pairing mode.

3. Open the Bluetooth settings on your device, select “VAXIS AIR,” and you will hear a voice prompt saying “Connected.”

Mute Mode

Play/Pause Music
Double~-click the Multi function Button

End Call
Double-click the Multi function Button

Call Switching
Long-press the Multi function Button

Answer Call
Double~-click the Multi function Button

Reject Call
Long-press the Multi function Button

More Functions

*Other buttons complete other functions. The above part related to calls is only applicable to phone calls, not to voice calls or video calls made by third-party software.

Check the Battery Level

This operation should be performed when the headsets are in standby mode and there is no audio playback.

Operating Method:

In standby mode with no audio playback, a single press of the power/volume+ button or the volume- button will result in the headsets providing the battery level information through voice prompts.

Volume voice broadcast content. “High power/ Medium power/Low power/ Please charge.

Maintenance and Care

Charging Reminder

There is a power prompt of the headset on the main unit of the communication system.If the headset’s battery is low, you will hear a prompt saying “Please Charge.” At this point, you need to charge the headsets. There is a Type-C charging port located on the back of the volume button. Simply insert the Type-C cable to begin charging.

During the charging process, the LED indicator light turns red, indicating that the headsets are charging.The headsets will not turn off during the charging process.The headsets can be powered by the communication system’s main unit in reverse. When the LED indicator turns blue, it indicates that the headset charging is complete.

Technical Specifications

APTX_LL APTX_HD
Built-in Lithium Battery| 250mAh
Charging Voltage| DC+5V
Charging Operating Temperature| 0~45°C
Charging Protection Cutoff Voltage| Approximately 6.0V
Full Charge Time| Approximately 40 minutes
Wireless Connection Auto Shutdown Time| 10 minutes
Out-of-Range Auto Shutdown Time| 10 minutes
Call Function| Yes
Interface| Type-C USB port
Continuous Talk Time| 12hours
Standby Time| 15days

Storage and Maintenance

• The headsets should be stored in a cool and dry place.
• The operating temperature should be between 0°C to 45°C.Working in extremely cold, hot, excessively humid, or low-pressure environments may shorten the battery lifespan.
• Please keep the product away from heat sources, direct sunlight, flammable gases, or other liquids.
• Keeping the charging port dry before charging will reduce the risk of headset damage.
• Please clean the headsets with a soft dry cloth.
• After long-term storage, please recharge the headsets again before use.

Note
If there are any design and specification changes, we reserve the right not to notify separately. For the latest company and product information, please visit www.vaxisglobal.com.

Warning
To avoid the risk of explosion, fire, or toxic chemical leakage,please do not disassemble the product or attempt to replace, deform, or damage the battery by yourself.

Packing List

• Box

• Vaxis Air Headset

• Type-C Cable

• User Guide Card

If there is any missing content in the above illustrations or if the product has any damage, please do not use it.

Please contact the dealer where you purchased the product or contact us directly.

*Please note that the packaging contents may vary due to regional differences in sales.

After-sales Service

The product is covered by a one-year warranty for non-human damage-related malfunctions. For any further issues, please contact Vaxis official customer service.

If you need further assistance,please contact us
Customer Service Hotline: 400-014-7080

VAXIS AIR for LITE COMM

Documents / Resources

| LAXIY 1077747 Vaxis Air Litecomm [pdf] User Guide
1077747 Vaxis Air Litecomm, 1077747, Vaxis Air Litecomm, Air Litecomm, Litecomm
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>