ANKER PowerConf S360 USB Speakerphone User Manual
- June 5, 2024
- Anker
Table of Contents
PowerConf S360 USB Speakerphone
User Manual
At a Glance
| 1. Volume down button | 6. PD-IN port |
|---|---|
| 2. Mute button | 7. USB-A port (USB 3.2 Gen 1, 5 Gbps) |
| 3. Phone call button | 8. HDMI port (HDMI 1.4, up to 4K030 Hz) |
| 4. Volume up button | 9. USB-C connector (USB 3.2 Gen 1, 5 Gbps) |
| 5. Microphone |
Connecting
There are 2 ways that you can connect the speakerphone to your devices.
Option A
Plug the USB-C connector of the speakerphone into a USB-C port on your PC.
Option B
- Plug the USB-C connector of the speakerphone into a USB-C port on your PC.
- Connect the speakerphone to a PD power adapter (not included) via the USB-C port on the back. Then, the speakerphone can power your PC.
-
The speakerphone will automatically power on once it’s connected to your PC.
-
Once the speakerphone is connected and powered on, all buttons will flash white for 2 seconds and then stay solid white.
-
If necessary, connect the speakerphone to a monitor via the HDMI port, or to a USB-A device to support data transfer via the USB-A port.
You might need to manually select PowerConf S360 and its built-in microphones for your PC system or conference software. -
macOS
System Preferences > Sound > Sound Effects / Output / Input -
Windows
Right-click on the sound icon > Open Sound settings > Choose your output device /Choose your input device -
Software(Zoom, Skype, others)
Settings > Audio > Speaker / Microphone
Controls
| Press once| Answer/End a call
---|---|---
Press and hold for 2 seconds| Reject a call
| Press once| Mute or restore the microphone
| Press or press and hold| Volume up/down
Make, answer, reject, or end a call only with certified software.
LED Light Guide
| Make a call| Flashing green
---|---|---
Incoming call
Answer / End a call| Solid green for 1 second, then solid
white Reject a call
| Mute on| Solid red
Mute off| Solid white
| Volume up / down| Flashing white
AnkerWork Software
Download and install the AnkerWork software on your PC
to update the firmware.
Specifications
Specifications are subject to change without notice.
| PD-IN port input | 5V 3 A, 9 V 3 A, 12V 3 A, 15 V 3 A, 20 V 5 A |
|---|---|
| Total USB-A port output | 5 V 1.5 A (7.5 W max per port) |
| USB-C connector maximum input | 5 V 3 A |
USB-C connector output
(with PD-IN port connected to USB-C adapter, and other port(s) loaded)| 5 V
0.5 A, 9 V 0.9 A, 12 V 1.4 A,
15 V 1.45 A, 20 V 1.5 A
USB-C connector maximum output (with PD-IN port connected to USB-C adapter,
and no other port loaded)| 5 V 2.4 A, 9 V 1.85 A, 12 V 2.1 A, 15V 2.1 A, 20 V
3.6 A
Rated output power| 3W
Speaker driver size| 1 x 1.75″ full-range driver
Voice pickup frequency| 16 kHz
Voice pickup range| Up to 6 people
Microphone| 4