Waykar PD606B Commercial Dehumidifier User Manual

PD606B Commercial Dehumidifier

Please read the manual carefully before using the unit

FOR CUSTOMERS

Thank you for purchasing our dehumidifier.
Waykar wishes that our products and services can bring convenience to your work and life. We highly recommend that you keep the manual for reference if you encounter unexpected events using the unit.

Please read the manual carefully to ensure proper use of the dehumidifier. Our dehumidifiers are widely used in family bedrooms, bathrooms, basements, offices and storage rooms, etc.

The dehumidifiers from Waykar provide quick and efficient operation to  reduce room’s humidity and bring you a healthy and comfortable life.

TO ACCESS CUSTOMER SUPPORT FASTER

If there is any problem of the product, please contact Waykar Customer Service at support@waykar.com with your Purchase Order ID to help you address the problem more effectively.

BEFORE FIRST USE:

To prevent any internal damage, it is very important to keep refrigeration units (like this one) upright throughout their journey.

Please leave it standing upright and outside the box for 24 HOURS before plugging it in.

Statement

The graphics and functions provided in this manual may not be the same as the actual product. Please always refer to the actual product.

The model of the machine on the manual is for reference only. Please check the corresponding content and ope rate the machine based on the actual product.

The right to interpret the relevant terms belongs to the company.

SAFETY INSTRUCTIONS

Safety Notes:
Do not insert fingers or other objects into the air outlet.
This appliance should not be used under the environment below 41℉.
Special Note: When the display screen does not light up, it does not mean the power has been disconnected.

Cautions!

• The unit shall be installed in accordance with national wiring regulations.
• Model specification of safety tube: 5A.
• This unit should be operated between the temperature of 41℉ and 100℉. If over this range, the machine may not work properly.
• When using this dehumidifier, other objects surrounding the machine at least need to kept at a distance 39.4 inches (1m).
• Please adopt the 110-120V-60Hz grounding socket.
• The installation and use of this machine must be in accordance with local regulations and rules.
• If you have any quesions about the installation of this product, please learn more from the user manual or refer to the professionals.
• Draw out the plug when do not use. Never remove the plug by pulling the wire. Never operate the machine with wet hands.
• Please keep this machine in the places will not be played with by the children.
• Never soak the machine in water or spray any water on the machine when cleaning. Please make sure to remove the plug when cleaning or maintaining the machine.
• Do not use the extension cable to connect with power, ask the professionals for installation when there are no proper sockets available.
• To avoid the occurrence of danger, ask manufacturer, agents or qualified staff for replacement of damaged power wire.

PARTS DESCRIPTION

CONTROL INTERFACE

1. Control Panel

2. Setting

Setting Humidity

• In power-on status, you can press Up/Down button to set the humidity range between 10%-98%RH.
• When it starts to work, the machine will first automatically detect and show the room’s humidity. You can press “Up” button to change the humidity slection in 1%RH increment or press “Down” button to change the humidity selection by 1%RH decrement.
• The big number “ ” will flash to show the setting value during this process.
• Press the “Function” button once or no operations for seconds, the machine will exit the function setting automatically and display the current humidty.

Timing Setting
This timer setting function is designed for you to set a time to turn off (when the machine is on) or to turn on (when the machine is off) the machine, automatically by the timer.
In power-on or power-off status, long press the “Timing” button to enter timer setting ” and “h” will light up, the small number will flash to show the setting time.

You can press “ Up ” or “Down” button to set the timer within 1-24 hours by 1-hour increment or decrement, which can be reset again after invalid.

Press and hold the “ Timing ” button for several seconds, it can be set continuously.
If no timer setting, the small number on the screen will display the current temperature. If the timer being set successfully, the small number will display the remaining time, and if you press the “ Timing ” button again, the small number will return to the remaining time automatically after a few seconds.

If the timer is set to “ “, this is called the invalid time.

OPERATION INSTRUCTIONS

Power off Memory Function

• After the device is powered on, it will automatically resume the working status before power off.
• If the machine is running before power outage, the machine will automatically enter power-on status, and maintain the previous setting parameters.
• If the machine is shut down before the power outage, then the machine will still be in power-off status.

Defrost Function
When the dehumidifier is running at a lower temperature, the system will automatically determine whether there is a presence of frost. If any frost exists, it will defrost automatically.
The fan will keep running and the compressor will stop when defrosting. After this process, the compressor will restart to run.

Temperature Protection Function
When the ambient temperature is higher than the default high temperature of 113°F, the system will enter high temperature protection, the small number will indicate “ HH “, and the compressor will stop;

When the ambient temperature is lower than the default low temperature of 39 °F, the system will enter the low temperature protection, the small number will indicate “ LL “, and the whole machine will stop.

Cleaning Remind Function
When the accumulative running time of the fan is ≥30 days, the machine can continue to run, but it will prompt ” ” and it will not be able to be removed even restarted.
In power-off status, long press the “ Function ” button for seconds, then the display screen will show once, the” ” prompt will be released, and the fan running time will  be cleared.

Special Note:

To avoid any damage to the dehumidifier, the compressor features a “3 minutes delay protection ” function, which is, when the dehumidifier is powered, the compressor can only start again 3 minutes later after its last shutdown.

3. Display Status Description

When the fan is delayed, the running icon “ ” will flash, a Running nd if the fan is running, the running icon ” ” will be on, otherwise it will be off.

When the compressor is delayed, the dehumidification icon ” ” will flash, and if the compressor is running, the dehumidification ” ” icon will be on, otherwise it will be off.

If the ambient humidity is lower than the setting humidity, the compressor will be stopped, and the humidity control icon ” ” will flash, otherwise it will be off.

When the machine needs to be cleaned, the cleaning icon ” ” will flash, otherwise it is off.

When the machine is defrosting, the defrost icon ” ” will flash, and go out when the defrosting ends.

4. Error & protection Code

Note:

1. If E0, E1, E2, E3, E4, ER or Eb occurs, the compressor and fan still work, and can be restarted when power supplied (press any button can release the alarm).
2. If E3, E5, E6, E8 or E9 alarms, the machine needs to be cut off the power supply to restart after troubleshooting.
3. When Ec occurs, the operation of the machine will not be controlled.

If the malfunction is still present, please don’t hesitate to contact Waykar Customer Service email at support@waykar.com for help.

5. Empty the Water Tank
Two ways are available to remove the collected water.

Use The Water Tank
When the water tank is already full, the ” ” indicator will light up, the dehumidifier will automatically shut down until the tank has been emptied and placed back to the unit.

Ways to Empty the Water Tank

6. Continuous Drainage
Pull out the power supply, open the door, take out the water tank, insert the water hose into the continuous drainage port, connect it with drainage outlet and put back the water tank.
Power the machine again to start the operation. The outlet of the water hose should be lower than the continuous drainage port by more than 6 inches, and the hose can not be bent during the drainage process, or the water will be blocked and can not flow out.
(Note: The diameter of continuous drainage port is 0.63 inches. )

WARNING:

Turn the dehumidifier off and remove the plug from the wall outlet before cleaning.

A-Cleaning the dehumidifier body
Please use a soft and a slightly wet textile or cloth to clean it.

B-Cleaning filter

1. Pull out the filter
2. Clean the filter: Use a vacuum cleaner to gently remove the dust from the surface of the filter. If the filter is very dirty, clean it with warm water and mild detergent and dry it completely.
3. Slowly insert the filter back into the machine body.

C-dehumidifier storage
When you want to store the dehumidifier, you don’t use it for a long time. Please pay attention to the following steps:

1. Empty the water in the water tank.
2. Roll up the power cord and tie it up.
3. Clean the filter.
4. Place the machine in a cool and dry environment.

COMMON FAULTS & SOLUTIONS

Check the information below for troubleshooting steps, it will save you time to resolve issues that may happen with the unit.

The list includes most of the common cases, but not the results of defective unit, crafts or materials in the unit.

If all troubleshooting steps have been exhausted and the issue is still occurring, please feel free to reach out to Waykar Customer Service to get further assistance.

Warning
If the dehumidifier is still not working properly as expected and the troubleshooting steps or solutions above may not resolve the issue, please unplug the power and shut down the dehumidifier, then contact Waykar Customer Service at support@waykar.com.

SAFETY NOTE

TECHINICAL PARAMETERS

Warranty

Waykar offers a 12-month warranty to all of our products together with the original proof of purchase when a defect occured, including those newly purchased and unused, from Waykar or through an authorized reseller, wholly or substantially, or as a result of faulty manufacturing parts, or workmanship during the Warranty Period.
The warranty does not apply if damage is caused by other factors, including but without limitation of:

(a) Normal wear and tear
(b) Abuse, mishanding, accident or failure to follow operating instruction:
(c) Exposure to liquid or infiltaration of forein particles.
(d) Servicing or modification of the product other than by Waykar.

There are our general terms for the warranty service, but we always encourage our customers to contact us if any issues, regardless of warranty terms. If you are experiencing an issue with Waykar product, you can reach out to us at support@waykar.com , we will dedicate our efforts to resolve it for you.

Extend Your Warranty by 1 Year

Register your product at www.waykar.com to extend your 1-year warranty by an additional year.

*Please fill out all required fields and inlcude your Order ID, Date of Purchased if applicable.

Customer Support

If you have any questions or concerns about your product, please feel free to contact our expert support team. Waykar customer service is here to help.

Waykar Office
13211, Spring Street Baldwin Park, CA, US
Email: support@waykar.com
Live Chat: www.waykar.com

Support Hours
24 Hours available
‘Please have your Order Number ready before contacting customer support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>