waykar PD253B 70 Pint Home Dehumidifier User Manual

waykar PD253B 70 Pint Home Dehumidifier

FOR CUSTOMERS

Thank you for purchasing our dehumidifier.
Waykar wishes that our products and services can bring convenience to your work and life.We highly recommend that you keep the manual for reference if you encounter unexpected events using the unit.
Please read the manual carefully to ensure proper use of the dehumidifier. Our dehumidifiers are widely used in family bedrooms, bathrooms, basements, offices and storage rooms, etc.
The dehumidifiers from Waykar provide quick and efficient operation to reduce room’s humidity and bring you a healthy and comfortable life.

TO ACCESS CUSTOMER SUPPORT FASTER
If there is any problem of the product, please contact Waykar Customer Service at support@waykar.com with your Purchase Order ID to help you address the problem more effectively.

BEFORE FIRST USE:

To prevent any internal damage, it is very important to keep the unit (like this one) upright throughout its journey.
Please leave it standing as the picture shown below and outside the box for 24 HOURS before plugging it in.

statement
The graphics and functions provided in this manual may not be the same as the actual product. Please always refer to the actual product.
The model of the machine on the manual is for reference only. Please check the corresponding content and operate the machine based on the actual product.
The right to interpret the relevant terms belongs to the company.

SAFETY INSTRUCTIONS

Safety Notes:
For your safety, please read the manual carefully and keep the manual before you use the manual for reference.
Please use this product according to the instructions of installation and operation of this manual.

• Before cleaning the dehumidifier, turn off the power and unplug it from the power outlet.
• Please do not place the machine near any heat source or flammable goods.
• Always keep the machine on even surface, instead of placing on uneven or sloping ground.
• When the power cord is damaged, it must be replaced by the qualified technician approved by our company.
• When using the dry clothes function, the clothes should be kept at least 40cm away from the air to prevent water from entering the outlet and damaging the machine.
• The machine power wiring must be in accordance with national wiring rules, and, power line should be connected to the reliable external Earth Line.
• The fixed wiring of the machine connection must be equipped with an all-pole disconnect device (air switch) with at least a 0.118-inch distance of electric shock.
• This appliance can not be used by children aged under 8 years old and persons withreduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instructions concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• When using dehumidifier, other objects surrounding the machine need to be kept at least a distance of 7.9 inches (20cm) as shown in the picture on the right:

PART DESCRIPTION

CONTROL INTERFACE

Control Panel

• Power Button Press to turn the dehumidifier on and off
• Up (+) Button Adjust the humidity level up Lock (2s) Button
• Press the button and hold for 2 seconds, the control panel will be locked
• Lighting Button Control the LED panel to light up or go out
• Down (-)Button
• Adjust the humidity level down Timer Button
• Press to initiate the auto-start and auto-stop feature
• Speed Button Control the fan speed

OPERATION INSTRUCTION

Setting

The humidity level can be set within a range of 30%RH to 80%RH in 5% increments.

• When it starts work, it will first automatically detect and show the room’s humidity. Press the “UP” button to change the humidity selection in 5% increments. “B” Flash and show the setting humidity.
• Press “UP” to make the humidity increase by 5%RH.
• Press “DOWN” to make it decrease by 5% RH. After no operation for 5s, “B8” the will show the actual room humidity.
• When the humidity level is higher or drops to the level you have set, the dehumidifier will automatically begin to work or stop.
• When the humidity level is set at 30%RH, the dehumidifier will work at continuous dehumidifying mode.

Timer Setting

This TIMER setting function is designed for you to set a time to turn off or turn on the machine, automatically by the timer.

1. Press the “TIMER” button to select the timer by 1-hour increment. You can set the timer up to 24 hours. It will start to do the countdown when you start the timer.
2. Press and hold the “TIMER” button for several seconds to make the selection of the timer faster.
3. If the time is set to 00, this is called the invalid time. If you set the timer successfully, the light” “or ” MER” will be up. The LED screen will show the remaining time if you press the ” TIMER” button, and display the current humidity automatically after a few seconds.

Speed Button
Control the fan speed. Press to select either High or Normal fan speed. Higher fan speed will result in quicker moisture removal. Set the speed high for maximum moisture removal. When the humidity has been reduced and quiet operation is more preferred, set the fan speed back to Normal.

Light Function Setting
1. In the power-on state, press the “Light” button to turn on or turn off the backlight;
2. When light function is powered on, except the “Power” button and the “Lighting” button is on, other backlight indicators will be off.

LOCK ( 2S)
When the unit is turned on, press “LOCK” and hold on for 2 seconds, the control panel will be locked together with the other buttons. To unlock the control panel, press and hold the “LOCK” button again for 2 seconds.

Power Off Memory Function
The device automatically restores the working state after power on.
If the device is turned on and a power interruption occurred, after starting the unit again, it will keep the previous parameters of setup.
If the device is turned off and power interruption occurred, the device will still be in a power-off status when turned on.

Overflow Protection
When the water tank is full of water, the machine will turn off automatically The indicator light”FULL will flash. After you empty the water from the tank, the indicator light ER or will turn off. The machine will restart to work.

Caution:
The water tank must be placed in right position, otherwise will cause the water full alarm.

Auto Defrost Feature
When the dehumidifier is running at a lower temperature, the system will automatically determine whether there is a presence of frost. If any frost exists, it will defrost automatically.

Defrost Action
The fan runs at high wind speed when the compressor stops, and the LED screen displays the defrosting symbol.

Display Status Description

• When the device is currently powered on, before any operation, only the “POWER” light will be up indicating the device is in “Standby” Status.
• Setting light ” “or “TIMERS”: f the timer is set up properly, the indicator light will be up, flash if press the TIMER button again to check and reset, and go out if non-successful setup.
• The lighting button, “O “: If the lighting function is powered on, the light button will be on, but other backlight indicators will be off.
• High-speed indicator light ” FAST”or “FAST”: If you set the unit to high-speed fan mode, this indicator will light up.
• Low-speed indicator light” SLOW” or “(XsLow “: If you set the unit to low-speed fan mode, this indicator will light up.
• Dehumidification light ” DEHUMIDIFY “or “EUMIDIFY: When the machine starts to dehumidify, the indicator light will be on.
• Waterful indicator light ” ” “or” “When the water tank is full, this indicator will be flashing.
• LOCK indicator light “|LocK)”: The indicator will light up if the control panel is locked successfully, if not the indicator will not be on.
• When the dehumidifier normally works, ” 88 “ill show the current humidity.

Instructions for Drying Clothes

1. The dehumidifier can be used for drying clothes in rainy weather.
   Step 1.
   Hang the washed clothes in a small space such as cloakroom, bathroom, or storage room.
   Note: Keep away the unit from the water drips of the washed clothes.
   Step 2.
   Open the dehumidifier and set the humidity level at 30%RH. It’s the best if you let the air outlet of the dehumidifier to blow air to the clothes directly.

2. The drying effect will vary from the thickness of clothes, the number of clothes and the size of the drying space.Theoretically, the effect will be better when clothes are few, thin and space is small.

3. The drying process would take 3-8 hours, and we suggest that continuous drainage mode would be more suitable when drying clothes.

Faults & Processing Methods

Fault Phenomenon , Analysis of Causes , Processing Method

Humidity always shows “25%RH”(There is a big difference from the actual humidity)

| ****

Humidity sensor failure?

| Set the humidity to 30%RH, the dehumidifier can still continue to work, and can be used normally.
---|---|---
Repair and replace the humidity sensor.

Humidity always shows “99%RH”(There is a big difference from the actual humidity)

| ****

1. Water on the surface of the humidity sensor? 2.Humidity sensor failure?

| The dehumidifier is not affected and can continue to work, and can be used normally.
Please let the dehumidifier keep working for a period of time, after the water on the surface of humidity sensor is removed, it will return to normal.
Repair and replace the humidity sensor.

If the malfunction is still present, please don’t hesitate to contact Waykar Customer Service at support@waykar.com for help.
Note:
Before starting the machine, please ensure that the air outlet has been opened, otherwise, the machine will overheat. Do not pull out the power cord directly to stop the machine.

Empty The Water Tank

Two ways are available to remove the collected water.

Use The Water Tank
When the water tank is already full, the WATER FULL indicator will light up, the dehumidifier will automatically shut down until the tank has been emptied and placed back to the unit.

Ways to Empty the Water Tank

Note:

• Do not remove the float from the water tank. If the float in the water tank is removed, the sensor may not be able to determine the water level stored in the tank properly which may lead to water overflow leak from the water tank.
• If the water tank is dirty, just use cold water or warm water to clean it. Do not use detergent, steel wool, chemically treated dust cloth, gasoline, benzene, thinner or other solvents. Otherwise, it may damage the water tank and cause it to leak.
• When placing back the water tank, use your hands to press the tank back in its place. If the water tank is not placed properly, sensors or protections from water overflow may not operate as expected.

Continuous Drainage

Pull out the power supply, take out the water tank, open the draining cap, insert the water hose into the continuous drainage port and put back the water tank.
Connect the power supply to start the operation.The outlet of the water hose should be lower than the continuous drainage port by more than 3.9 inches, and can not be bent.
( Note: The diameter of the continuous drainage port is 0.63 inches .)

CLEANING AND MAINTENANCE

WARNING:
Turn the dehumidifier off and remove the plug from the wall outlet before cleaning.

• A-Cleaning the dehumidifier body
  Please use a soft and slightly wet textile or cloth to clean it.

• B-Cleaning filter

  1. Pull out the filter.
  2. Clean the filter: Use a vacuum cleaner to gently remove the dust from the surface of the filter. If the filter is very dirty, clean it with warm water and mild detergent and dry it completely.
  3. Slowly insert the filter back into the machine body.

• C-Dehumidifier storage
  When you want to store the dehumidifier because you don’t use it for a long time. Please pay attention to the following steps:

  1. Empty the water in the water tank.
  2. Roll up the power cord and tie it up.
  3. Clean the filter.
  4. Place the machine in a cool and dry environment.

COMMON FAULTS AND SOLUTIONS

Check the information below for troubleshooting steps, it will save you time to resolve issues that may happen with the unit.
The list includes most of the common cases, but not the results of a defective unit, crafts, or materials in the unit.
If all troubleshooting steps have been exhausted and the issue is stilI Occurring. please feel free to reach out to Walker Customer Service to get further assistance.

 |  |
---|---|---

|  |
Is the Full Tank indicator blinking?|

| This product does not apply to
over hot or cold environment, the
machine will automatically enter
the protection mode. It is a normal
phenomenon.
 | When running under lower
ambient temperature, the machine
will automatically defrost, which is
a normal phenomenon. It will
restart dehumification again until
the defrosting process finished.
 | It is normal the compressor
ceases while defrosting process.
Wait until the process finished, it
will restart dehumidification again.
Is the room humidity lower or|
reaching the preset humidity level?| Please set the humidity decrease
(When the room humidity has| by 5% than the room humidity or
reached the preset level, the dehumidifier will enter Standby| set the humidity to 30%.
Mode and the indicator on LCD|
will flash. )|
This is to prevent the frequent|
start of the machine. Does the
machine stop working just now?
 | The dehumidifier is designed to
work in the humidity range of 30%-
80%. Above or below this range, it
will not work.

|  |
---|---|---
 |
 |

to

 |

product

 |

|
Room temperature is too low, or below 41℉ (5℃): The machine will not work or undergo poor dehumifying efficiency in low temperature.|

Please wait until the temperature rises to above 5℃ or higher.

The

|

levelly.

|
 |

Clean up the dirt or lint on the air outlet and intake.

 | Please check whether the packing bag of the filter had been removed and the filter has been installed correctly.

|

Continuous Mode

| Do Not set the humidity too low. Typically, 40-50% are good for use.
 |

to

 |

|  |

Connect the hose with the drainage port tightly.

---|---|---

The water tank has not been installed properly.

|

Re-install the water tank properly.

The float of water tank has been stuck.

|

Move the float and let it swing freely.

 |

WARNING: If the dehumidifier is still not working properly as expected and the troubleshooting steps or solutions above may not resolve the issue, please unplug the power and shut down the dehumidifier, then contact Waykar Customer Service at support@waykar.com.

SAFETY NOTE

1. When using. please do not put the machine at the soft and uneven ground, avoid vibration and movement.
2. Do not insert thin rods and hard objects into the machine body to avoid malfunction and danger.
3. When using, please keep the machine away from heating furnace, electric kettle and other heat sources.
4. When using, please close doors and windows to achieve the best remove humidity effect.
5. Please do not put objects around the body. If the ventilation is blocked, the dehumidification effect will be affected.
6. If do not use the product for a long time, please unplug the power cord.
7. When cleaning the dehumidifier, please use the wet textile to wipe gently, do not shoot the water directly.
8. Please do not put any object on the dehumidifier.
9. Please clean the filter every two weeks (do not use hot water above 104°F, alcohol, gasoline or toluene.)
10. When continuous drainage, the drain hose must be placed horizontally, without unevenness and winding.
11. After cleaning the filter, please do not dry it under direct sunlight, in case of deformation.
12. Before moving and carrying the machine, please first pour out the water in the tank.

TECHNICAL PARAMETERS

WARNING: This product can expose you to chemicals including Styrene and its compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warning.ca.gov.

WARRANTY AND CONTACT US

Warranty
unused, from waykar or through an authorized reseller, wholly or substantially, or as a result of tenuity manufacturing parts, Or workmanship during the warranty period. The warranty does not apply if the damage is caused by other  actors, including but without limitation o
(a) Normal wear and tear ccident or failure to follow operating insrucudnis
(c) Exposure to liquid or infiltration of foreign par
(d) Servicing or modification of the product other than by Waykar,
There are our general terms for the warranty service, but we always encourage our customers to contact us if any issues, regardless of warranty terms. If you are
experiencing an issue with the Vwaykar product, you can reach out to us at Support@waykar.com, we will dedicate our efforts to resolve it for you.

Extend Your Warranty by 1 Year
register your product at www.waykar.com to extend your 1-year warranty by an additional year
Please fill out all required fields and include your Order ID, and Date of Purchased if applicabie.

Customer Support
If you have any questions or concerns about Our expert support team. Waykar customer service is here to help contact

Waykar Office
13211, Spring Street Baldwin Park, CA, US
mail: waykar.com
LIvE Cnat www.waykar.com

Support Hours
24 Hours available
Please have your Order Number ready before contacting Customer support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>