Waykar CFD2.5D Commercial Dehumidifier User Manual

Waykar CFD2.5D Commercial Dehumidifier

BEFORE FIRST USE

To prevent any internal damage,it is very important to keep refrigeration units (like this one) upright throughout their journey. Please leave it standing upright and outside the box for  24 HOURS before plugging it in.

FOR CUSTOMERS

Thank you for purchasing our dehumidifier. waykar wishes that our products and services can bring convenience to your work and life. We highly recommend that you keep the manual for reference if you encounter unexpected events using the unit.Please read the manual carefully to ensure the proper use of the dehumidifier. Our company’s dehumidifier is widely used in family bedrooms, bathrooms, basements, offices, storage rooms, etc. This dehumidifier from waykar operates quickly and efficiently to reduce room’s humidity and bring you a healthy and comfortable life.

To Access Customer Support Faster

If there is any problem of the product, please contact Waykar Customer Service at [email protected] with your purchase Order ID to help us address the problem faster.

Important
For safety purpose, you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and may only be installed and operated in accordance with these instructions for use.

1. Unplug the power supply cord before cleaning or storage.
2. Do not immerse the unit in water, or place it close to water.
3. Do not put the unit close to heat-generating devices or near flammable and dangerous materials.
4. Never put your fingers or any stick-form objects into the air inlet or outlet grille.
5. Do not sit or stand on the unit.
6. Discard water collected in the tank as instructed.
7. Install drain piping at a downward direction to make sure that condensed water can be drained continuously.
8. Place and operate the unit on a stable and level floor.
9. Do not spray or splash water directly onto the unit.
10. Do not spray any pesticide nor flammable liquid onto the unit.
11. Do not place any heavy object or let children and pets sit on the unit.
12. Do not operate dehumidifier in a small and confined space.
13. Damaged power cord must be replaced by a licensed technician.

Product Structure

Operation Instructions

Control Panel

Button Description

1. Power Button
   Press the power button.the machine will turn on, otherwise off ( the LCD screen will light on the power-on state, otherwise is off.
   Note: When the LCD screen off does not mean that the power is off.

2. Up Button
   Set humidity value or timer time increments.

3. Down Button
   Set humidity value or timer time decremented.

4. Timing / function Button
   Long time to press will set the timer setting, short press can to confirm parameter settings.

Humidity Setting
In the power-on status, press “up” or “down” button once time to set the humidity setting,”% RH” bright, and “Humidity” flashes can display humidity setting value “**.” . In the humidity setting mode, press “up” or “down” button to set the humidity value, setting range 10-98% RH. Press “Timer/ Function” button once or after stop a few seconds to operate it, will automatically exits humidity settings.

Timing Shutdown Settings
In shutdown mode, the timing is set to timing for the power on; In the boot state, the timing is set to timing shutdown.In the power on/ off state, long press “timer I Function” button for a few seconds to enter the timer setting status: “H” and the timing sign bright , “temperature” flashing display timing time”00.” At timing set state, press “up” or “down” key to set the timing, setting range 1 – 24h, can to cycling setting.No set timer, “temperature” show the ambient temperature; when the set time is valid, the “temperature” shows the remaining timer time(this time press “Timer I Function” key once, you can view the ambient temperature).

Action Description

1. power on: fan start, after a few seconds delay the compressor 1 working, after then a few seconds delay electric heating open, then a few seconds delay compressor 2 start (if it is a single system, the compressor 2 does not start.if it isn’t heating function , the electric heating is not open).
2. Power off: compressor 1 and compressor 2 at the same time stop, after a few seconds delay the fan stop.
3. ln order to prevent the machine start and stop frequently, there is a delay between starts have 3min.

Status Description

In the delay boot state, “run” character flashes; the fan is running, “the fan ” bright, otherwise off; when the compressor is running, means in the dehumidification state, “drip icon” bright, otherwise off;when the current humidity reach to request humidity, machine will stop (that’s mean in wet control state), “wet control” character flashes.

Defrost Function

When machine run under low ambient temperature, the system will automatically determine whether there is frost, if have frost, that will automatically defrost. Defrost action: the compressor stops. Defrost ends: Fan continues to run the compressor is turned on. Defrost display: When defrosting, defrost character or icon flashing, fan icon lights.

Temperature Protection Function

When the ambient temperature is higher than the temperature set value (default 113° F), the system enters the high-temperature protection, displays “HH”, the compressor stop. When the ambient temperature is below the temperature setpoint (default 39.2° F), the system enters low-temperature protection, display “LL”, the machine stop.

12            Eb

__13 Ee

| Defrost temperature sensor 4 failure

Display information transmission abnormal __

Note:

1. if display EO, E1, E2, E4, EA or EB fault, compressors, fans were still working, only alarm and display fault code, turn off the electricity power then turn on still can start (a few seconds for the alarm sound, press any button to reset the alarm sounds).
2. E3, E5, E6, EB, E9 alarms, troubleshooting, need power off, then power on, the alarm will relieve.
3. After try the above solutions, if the malfunction is still present, please don’t hesitate to contact Waykar Customer Service Support , email: [email protected] for help.

Troubleshooting

When you run into any problems operating this product, use the table below to troubleshoot the problems.

After try the above sol utions, if the mal function is stil l present, please don’t hesitate to contact Waykar Customer Service Suppor t , email: suppor [email protected] for help.

Safety Cautions

Technical Specifications

Working temperature range from 41 °F to l00°F. In the event of the room temperature exceed this range; this part will not work properly. The parts parameters of above are subject to modification without further notice.

WARNING:

This product can expose you to chemicals including Styrene and its compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov

Maintenance

In the maintenance and cleaning products before shifting of power line.Clean body using soft damp cloth dehumidifier. Do not use detergent scrub, wire, chemical treatment of the dust cloth, gasoline, benzene, thinner or other soluble. Detergent, because it will damage to the fuselage.

Clean The Filter

This product has a cleanable filter, can remove most of the airborne dirt, such as dust, smoke, animal dander, mold spores and pollen, reduce allergens in the environment. Recommended periodic check filter, mi-nimum monthly or at Storage before cleaning.

Take Out The Filter Net

1. Vacuum cleaners or gun wind gently remove dirt on the filtering net.
2. If the filter is very dirty, please use warm water and mild detergent washing, and the thorough drying. Don’t let direct sunlight or other exothermic products drying filter, which will make the filter net and the deformation of frame.
3. Put the filter back to the product.

Drainage

This dehumidfier only drains by continuously drainage.

1. There is an included drain hose come with the product in the package.
2. When use continuous drainage by drain hose,please make sure the hose is place in smooth way to drain the water,if there is bending or knot,there will be problem of drainage.

Warranty

Waykar offers a 12-month warranty to all of our products, newly purchased and unused, from Waykar or through an authorized reseller, together with the original proof of purchase when a defect occurred, wholly or substantially, or as a result of faulty manufacturing, parts or workmanship during the Warranty Period. The warranty does not apply if damage is caused by other factors, including without limitation of:

Extend Your Warranty by 1 Year
Register your product at www.waykar.com to extend your 1-year warranty by an additional year. Please filled out all required fields and include your order ID, Date of Purchased if applicable.
Customer Support

If you have any questions or concerns about your product, please feel free to contact our expert support team. Waykar customer service is here to help!
Wa kar Office
13211, Spring Street Baldwin Park, CA, US
Email: s[email protected]
Live Chat: www.waykar.com
Support Hours
24 Hours available
*Please have your order number before contacting customer support.

References

• Shop Waykar Home & Commercial Dehumidifiers Online Free Shipping

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>