airex AXR.SW.GAN.1025 Sandwich Prep Gantry Installation Guide
- June 5, 2024
- airex
Table of Contents
airex AXR.SW.GAN.1025 Sandwich Prep Gantry
Your New Airex Product
Thank you for choosing this quality Airex product. All Airex products are designed and manufactured to meet the needs of food service professionals. By caring for and maintaining your new Airex product in accordance with these instructions, will provide many years of reliable service. Stoddart is a wholly Australian owned company, which manufactures and/or distributes a comprehensive range of food service equipment for kitchens, food preparation and presentation. Stoddart products are manufactured and/or engineered in Australia to provide excellent results whilst offering value-for-money, ease- of-use and reliability. Carefully read this instruction booklet, as it contains important advice for safe installation, operation and maintenance. Keep this booklet on hand in a safe place for future reference by other operators or users.
Disclaimer
The manufacturer and distributor cannot be held responsible or liable for any
injuries or damages of any kind occurred to persons, units or others, due to
abuse and misuse of this unit in regards to installation, removal, operation,
servicing or maintenance, or lack of conformity with the instructions
indicated in this documentation. All units made by the manufacturer are
delivered assembled, where possible, and ready to install. Any installation,
removal, servicing, maintenance and access or removal of any parts, panels or
safety barriers that is not permitted, does not comply in accordance to this
documentation, or not performed by a TRAINED AND AUTHORISED SPECIALIST will
result in the IMMEDIATE LOSS OF THE WARRANTY. The manufacturer cannot be held
responsible or liable for any unauthorised modifi cations or repairs. All
modifi cations or repairs must be approved by the manufacturer in writing
before initiating. All modifi cations or repairs performed to this unit must
be performed at all times by a TRAINED AND AUTHORISED SPECIALIST.
Stoddart design, manufacture and distribute Food Service Equipment (appliances) exclusively for the commercial market. This appliance is not designed nor intended for household or domestic use and must not be used for this purpose.This product is intended for commercial use, and in line with Australian electrical safety standards the following warnings are provided:
- This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid a hazard
Warranty & Registration
Warranty Period
All Stoddart manufactured and distributed products are covered by Stoddart’s
standard Australia and New Zealand Product Warranty (minimum 12 month on-site
parts and labour, terms and conditions apply). Further to this standard
warranty, certain products have access to an extended warranty. Full terms,
conditions and exclusions can be found using the below Link/QR code.
Warranty Registration
To register your new product, Follow the below Link/QR code.
General Precautions
- All units MUST be installed according to the procedures stated in the installation section of this manual
- DO NOT use this unit for any other purpose than its intended use
- Keep fingers out of “pinch point” areas
Hardware Supplied
Item | Description | Quantity |
---|---|---|
AXR.SW.1025 | AXR.SW.1740 | AXR.SW.2450 |
A | Glass Front | 1 |
B | Glass Top | 1 |
C | Glass Shelf | 1 |
D | Glass Side | 2 |
E | Base Bracket Screw | 12 |
F | Grub Screw | 6 |
G | Base Bracket | 6 |
H | 90° Bracket Fixing | 20 |
I | 90° Bracket | 10 |
Assembly
Preparation
Remove the pre-installed thumb screws
Base Brackets
- Postion the base brackets on the unit (grub screw faacing in)
- Secure with two base bracket screws per bracket
Glass Sides
- Position glass sides in brackets
- Tighten grub screws, do not over-tighten
Glass Front
- Position glass front in brackets
- Tighten grub screws, do not over-tighten
90° Bracket
Secure the 90° Brackets to the glass sides / front, using the supplied
fixings
Glass shelf
Position the glass shelf on the 90° Brackets and secure using the supplied
fixings
Glass Top
Position the glass top on the 90° Brackets and secure using the supplied
fixings
Final Check
- Check all glass is aligned evenly
- Do a final tighten of all screws/fixings
- Clean glass with a lint free cloth and glass cleaner
Service
Australia
Service / Spare Parts
Tel: 1300 307 289 Email:
service@stoddart.com.au Email:
spares@stoddart.com.au
Service Request
www.stoddart.com.au
Australian Business Number: 16009690251
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>